Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Transient Testing"”.
-
Pressure transient testing in coalbed methane reservoirs
Pressure transient testing in coalbed methane reservoirs differs significantly from well testing in conventional gas reservoirs. Coal's storage and production mechanisms are the primary cause for the disparity in the analysis for the two types of reservoirs. A modification of conventional analysis …
-
LONG TERM TRANSIENT TESTING OF SOLAR COLLECTORS
The testing of solar collectors is usually carried out under a steady state weather conditions whereby the collector fluid inlet and outlet temperatures are maintained steady over the testing period. However, in the actual testing, it is difficult to obtain the steady state conditions required. …
-
Pressure transient testing and productivity analysis for horizontal wells
… boundary conditions, and can accurately simulate transient tests and long-term production of horizontal wells. Thus, it can serve as a powerful tool in productivity evaluation and analysis of well tests for horizontal wells. Uncertainty of productivity prediction was preliminarily explored. It was …
-
A novel transient testing method for heat/energy wheel components
… buildings. This Ph.D. thesis proposes a novel transient testing facility and method to predict the effectiveness of heat/energy wheels by testing a small component of the wheels. The component required for this test is a few coated sheets (for energy wheels) or non-coated sheets (for heat …
-
Informing Safety Analysis and Transient Testing for the Transformational Challenge Reactor
… of the systems codes TRACE and RELAP5-3D to TCR transient analysis. Then, RELAP models are used to examine the transient response of two candidate core designs. Next, models for reactivity insertion accidents (RIAs) are used to generate boundary conditions for transient testing and …
-
Estimation of skin factor by using pressure transient testing results of a Single Rate Well Test
… estimate true skin factor by conventional well testing calculations.;The objective of this study is to introduce a new methodology to enhance the current practices of estimating true skin factor from a SRT. This method includes history matching of the actual MRT and then estimation of skin value …
-
Determination of impulse generator setup for transient testing of power transformers using optimization-enabled electromagnetic transient simulation
… are used to generate impulse waveforms for testing purposes. A novel approach is proposed to obtain resistor settings of a Marx generator for impulse testing of power transformers. This approach enables us to overcome most of the major challenges in the commonly used trial-and-error method, …
-
The use of the analog computer with the single blow transient testing technique for compact heat exchanger surfaces.
The purpose of this investigation was to determine the feasibility of using an analog computer to obtain the time derivative of the temperature response of a compact heat exchanger surface subjected to a step change in incoming fluid temperature; and to investigate the effect of the ratio of flow …
-
Experimental Techniques to Determine Ntu of Compact Heat Exchanger Surfaces
Two new transient testing techniques were evaluated; the centrold method developed by Kohlmayr and the time zero intercept technique. The zero intercept method was found to be the most promising of the two but is limited to values of N < 2.5. The centrold technique can be used effectively when the …
-
Heat transfer and flow friction characteristics of fibrous metals.
The single-blow transient testing facility of the Naval Postgraduate School was reconstructed. With this apparatus the flow friction and heat transfer characteristics of four grades of steel wool, considered to be representative of fibrous metals, were determined. The flow friction characteristics …
-
Experimental determination of heat transfer and flow friction characteristics for several plate fin type compact heat exchanger surfaces
… data was obtained by means of the single-blow transient testing technique. A cylic method of transient testing was also investigated, and found to be both reliable and useful in that the additional method of testing extends the Reynolds number range for the experimental apparatus.
-
A Semi-Analytic Solution for Flow in Finite-Conductivity Vertical Fractures Using Fractal Theory
… theory has been successfully applied to pressure transient testing, albeit with an emphasis on the effects of natural fractures in pressure-rate behavior. In this work, we begin by performing a rigorous analytical and numerical study of the Fractal Diffusivity Equation and we show that it is more …
-
Combustion Engine Models for Hybrid Vehicle System Development
… has been partially validated through the use of transient testing. The thesis also contains a proof of concept study that is called TES Transient Emission Sampling, which is a method for measuring exhaust emissions during transients.
-
An Experimental Determination of Heat Transfer and Flow Friction Characteristics of Perforated Material for Compact Heat Exchanger Surfaces
The transient testing technique for the determination of heat transfer characteristics of a porous medium has been known since 1929. It requires a good deal of care and one of the important restrictions is a step change in temperature must be applied to the medium at the beginning of a test run. …
-
SOLUTION OF THE SINGLE BLOW PROBLEM WITH LONGITUDINAL CONDUCTION BY NUMERICAL INVERSION OF LAPLACE TRANSFORMS.
… two partial differential equations represent the transient heat transfer behavior of compact heat exchanger surfaces when subjected to a step change in fluid temperature. A solution is presented for this system which includes the effects of longitudinal thermal heat conduction. Also presented are …
-
Predicting a detailed permeability profile from minipermeameter measurements and well log data
… in one of two ways. These are pressure transient testing and core analysis. Both methods are expensive in their own ways. This research focuses on a way to minimize or limit the need for both of these testing procedures.;The purpose of this research was to utilize well log data, mainly …
-
An analysis of spacecraft dynamic testing at the vehicle level
… accumulated a vast amount of expertise in the testing of spacecraft to ensure these vehicles can endure the harsh environments associated with launch and on-orbit operations. Even with this corporate experience, there remains a wide variation in the techniques utilized to test spacecraft during …
-
Effectiveness of energy wheels from transient measurements
… This research uses a new, low-cost, transient method to predict the effectiveness using only data obtained from transient measurements.In this thesis, an analytical model is presented for predicting the effectiveness of rotating energy wheels using only the characteristics measured on …
-
Analytical Solutions for Hydraulic Fracture Diagnosis
… theories and applications of pressure transient testing as a tool for hydraulic fracture diagnosis. Pressure transient analysis is an inverse process and therefore subject to uncertainties and uniqueness problems. Although the analysis of pressure data is nowadays fully computer …
Page 1 of 2