Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Transient Thermal Model"”.

  1. A transient thermal model for machining

    … finite difference method based numerical model on simulating the temperature distribution in the chip, tool, and finished workpiece surface layer as a function of material properties, cutting speed, feed rate and tool-workpiece engagement period. The heat is generated in the primary shear …

    ubc Repository record for A transient thermal model for machining (opens in a new tab) Download PDF for A transient thermal model for machining (opens in a new tab)

  2. Development of a Black-Box Transient Thermal Model for Residential Buildings

    … to develop a predictive black-box statistical model for residential thermal transience. The model is able to predict when a collection of homes' air conditioners will either cycle on or off based on multiple measured inputs. When used in conjunction with a series of residential thermostats …

    unlv Repository record for Development of a Black-Box Transient Thermal Model for Residential Buildings (opens in a new tab) Download PDF for Development of a Black-Box Transient Thermal Model for Residential Buildings (opens in a new tab)

  3. Transient Thermal Modeling of Bioprocessing Equipment

    … and enable optimization of control parameters, a transient thermal model of both heat transfer characteristics and control systems was created in silico.

    utahstate Repository record for Transient Thermal Modeling of Bioprocessing Equipment (opens in a new tab)

  4. Thermal and structural finite element analysis of early-age mass concrete structures

    … due to hydration of cement. Two theoretical models, namely, a transient thermal model and a transient stress model are developed to predict the behaviour of young concrete. The models account for several factors such as arbitrary concrete block pour history, convective heat exchange between …

    manitoba Repository record for Thermal and structural finite element analysis of early-age mass concrete structures (opens in a new tab)

  5. GATE DIELECTRIC BREAKDOWN PHYSICAL ANALYSIS AND STUDIES -2D MODELING OF BREAKDOWN THERMAL EFFECT

    … fully understood. In this project, a theoretical model has been built based on the electro-thermal migration phenomenon to predict the size of DBIE under the influence of current density and temperature. TEM micrograph observations during the formation of DBIE have been verified by constructing a …

    nus Repository record for GATE DIELECTRIC BREAKDOWN PHYSICAL ANALYSIS AND STUDIES -2D MODELING OF BREAKDOWN THERMAL EFFECT (opens in a new tab) Download file for GATE DIELECTRIC BREAKDOWN PHYSICAL ANALYSIS AND STUDIES -2D MODELING OF BREAKDOWN THERMAL EFFECT (opens in a new tab)

  6. A Model of the Diurnal Variation in Lake Surface Temperature

    … mea-surements restrict these improvements. A model of the diurnal variation in lake surface temperature could potentially increase the effective temporal resolution of satellite measurements of surface tem-perature, thereby enhancing the utility of these measurements in the above applications. …

    clemson Repository record for A Model of the Diurnal Variation in Lake Surface Temperature (opens in a new tab)

  7. Numerical Heat Transfer Simulations of Brake Discs under Dyno-Test Load Cases

    … whose performance heavily relies on efficient thermal dissipation. Yet, conventional laboratory dynamometer testing remains costly and time-consuming. To address this challenge, this study establishes a reliable CFD methodology to simulate and visualize complex aerothermal behavior before …

    chalmers Repository record for Numerical Heat Transfer Simulations of Brake Discs under Dyno-Test Load Cases (opens in a new tab)

  8. Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method

    … focused on developing a simple and reliable model of LSG for metallic materials by FEM. Both 2D and 3D transient thermal model of LSG with cylindrical geometry were successfully developed in ANSYS mechanical APDL software. Temperature distributions, heating, cooling rates and depth of …

    city-london Download PDF for Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method (opens in a new tab)

  9. Non-invasive Method to Measure Energy Flow Rate in a Pipe

    … install and less expensive has been developed. A thermal interrogation method using heat flux and temperature measurements is used. A transient thermal model, lumped capacitance method LCM, before and during activation of an external heater provides estimates of the fluid heat transfer coefficient …

    vt Repository record for Non-invasive Method to Measure Energy Flow Rate in a Pipe (opens in a new tab)

  10. System Level Modeling of Thermal Transients in PEMFC Systems

    Fuel cell system models are key tools for automotive fuel cell system engineers to properly size components to meet design parameters without compromising efficiency by over-sizing parasitic components. A transient fuel cell system level model is being developed that includes a simplified transient …

    vt Repository record for System Level Modeling of Thermal Transients in PEMFC Systems (opens in a new tab)

  11. Increased biosecurity in feed manufacturing through effective hydrothermal treatment and recontamination prevention during drying, cooling and handling

    … (2) developing, validating, and applying a transient thermal model of conduction heating within a retentioner, (3) analyzing steam usage for conditioning, and (4) designing a pneumatic transfer system to simultaneously transport, dry, and cool feed after processing to prevent …

    iastate Repository record for Increased biosecurity in feed manufacturing through effective hydrothermal treatment and recontamination prevention during drying, cooling and handling (opens in a new tab)

  12. Optimization of Bonding Geometry for a Planar Power Module to Minimize Thermal Impedance and Thermo-Mechanical Stress

    … on development a planar power module with low thermal impedance and thermo-mechanical stress for high density integration of power electronics systems. With the development semiconductor technology, the heat flux generated in power device keeps increasing. As a result, more and more stringent …

    vt Repository record for Optimization of Bonding Geometry for a Planar Power Module to Minimize Thermal Impedance and Thermo-Mechanical Stress (opens in a new tab)

  13. Diagnosis of Acid Placement from Downhole Temperature Measurements

    … during and after acid injection. We developed a transient thermal model for reservoir, coupled with a wormhole penetration model. Then the reservoir model is combined with a vertical well temperature model as the forward model, which can predict the temperature behavior inside formation and …

    tamu Repository record for Diagnosis of Acid Placement from Downhole Temperature Measurements (opens in a new tab)

  14. Processing Mechanics of Additive Friction Stir Deposition

    … and 3) traversing shear flow. The analytical models provide 'back-of-the-envelope' estimates of mechanical requirements (machine torque, for example), and straightforward algebraic equations for estimating the peak strain rate associated with deformation and the expected residence time of …

    vt Repository record for Processing Mechanics of Additive Friction Stir Deposition (opens in a new tab)

  15. Intelligent Non-Invasive Thermal Energy Flow Rate Sensor for Laminar and Turbulent Pipe Flows

    … the development of an intelligent non-invasive thermal energy flow rate sensor for laminar and turbulent pipe flows. Energy flow rate is the thermal energy that is carried by a fluid, for example, in a pipe to heat or cool a space in a building. It can be measured by an energy flow rate sensor …

    vt Repository record for Intelligent Non-Invasive Thermal Energy Flow Rate Sensor for Laminar and Turbulent Pipe Flows (opens in a new tab)

  16. Control-Oriented Thermal Model for a Hybrid Vehicle Battery

    … temper- ature information can be used for better thermal control of the cells in the battery pack. Lithium-ion cells are known to have a measurable temperature gradient when operating un- der extreme conditions. As a result, the surface temperature of cells as measured by the temperature sensors …

    vt Repository record for Control-Oriented Thermal Model for a Hybrid Vehicle Battery (opens in a new tab)

  17. Modelling of bath/ledge heat transfer in Hall-Heroult cells

    … heat transfer in a full-scale 3-D air-water model. Quantitative measurements were conducted to determine the bath/ledge heat transfer characteristics at various positions, and under different operating conditions such as anode-ledge distance, current density and bath depth. Variation of the …

    auckland-ms Repository record for Modelling of bath/ledge heat transfer in Hall-Heroult cells (opens in a new tab)