Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Transient thermal analysis"”.

  1. Nonlinear Transient Thermal Analysis By the Force-Derivative Method

    … method (MAM), extensively used in structural analysis, is a first-order form of the FDM which includes only one correction term that depends on the forcing function itself. The success of the FDM in many structural dynamic applications has prompted its application for solving transient thermal …

    odu Repository record for Nonlinear Transient Thermal Analysis By the Force-Derivative Method (opens in a new tab)

  2. Transient thermal analysis of a high power density magnetohydrodynamic nozzle

    <p>The transient heat conduction in a high power density magnetohydrodynamic nozzle has been numerically modeled. The numerical scheme is based on finite differences and the solution procedure used a successive under relaxation technique. The comparisons of numerical results with analytical …

    ut-knoxville Repository record for Transient thermal analysis of a high power density magnetohydrodynamic nozzle (opens in a new tab)

  3. Transient thermal analysis of three latent heat storage configurations for rapid thermal charging

    <p>A space-based thermal storage application must accept large quantities of heat in a short period of time at an elevated temper ature. An approximate model of a lithium hydride phase change energy storage system was used to estimate reasonable physical dimensions for this application which …

    ut-knoxville Repository record for Transient thermal analysis of three latent heat storage configurations for rapid thermal charging (opens in a new tab)

  4. Computational intelligence and transient thermal analysis methods for exploratory analysis of source air quality

    … emission factors method, the multiple regression analysis method, and the process-based modeling method.</p> <p>Emission factors, expressed by the amount of each substance emitted per animal unit, are multiplied by the number of animal units to get average air emissions from animal operations. …

    iastate Repository record for Computational intelligence and transient thermal analysis methods for exploratory analysis of source air quality (opens in a new tab)

  5. A Transient Thermal and Structural Analysis of Fuel in the Annular Core Research Reactor

    … resurfacing of contradictory reports regarding thermal stresses in its fuel pellets. Unlike other reactor fuels, which are widely used and well-characterized, the fuel in the ACRR is unique. The ACRR’s fuel elements consist of UO­2-BeO fuel pellets, fluted niobium refractory liners, and …

    unm Repository record for A Transient Thermal and Structural Analysis of Fuel in the Annular Core Research Reactor (opens in a new tab)

  6. Intermediate design and analysis of the PANSAT electrical power subsystem

    … reduction in predicted power. A preliminary transient thermal analysis of PANSAT was also conducted to provide temperature data for PANSAM

    nps Repository record for Intermediate design and analysis of the PANSAT electrical power subsystem (opens in a new tab)

  7. Finite Element Analysis of Thermal Stresses in Semiconductor Devices

    … the production of a semiconductor device. The thermal stresses, which result in die cracking, are for the most part induced during the cooling process after attaching the die with Gold-Silicon solder. Major factors for stress generation in material systems are commonly large temperature …

    portland-state Repository record for Finite Element Analysis of Thermal Stresses in Semiconductor Devices (opens in a new tab)

  8. Thermal Compatibility Analysis of the Passive Damping Treatment Proposed for the Space Shuttle Remote Manipulator System (SRMS)

    … accuracy. This thesis concerns with the thermal compatibility analysis of the proposed damping treatment. The necessity for thermal compatibility analysis arises from the fact that acceptable damping performance of viscoelastic material of the damping treatment is greatly influenced by …

    odu Repository record for Thermal Compatibility Analysis of the Passive Damping Treatment Proposed for the Space Shuttle Remote Manipulator System (SRMS) (opens in a new tab)

  9. Assessing Temperature Differences on a Sample Heated in a Tube Furnace Under Vacuum

    … The presence of temperature variations during thermal treatment may vary the quality of the product. In this thesis, the possibility of creating temperature differences on a specimen undergoing thermal treatment in a horizontal tube furnace under vacuum is explored. In a furnace system where …

    clemson Repository record for Assessing Temperature Differences on a Sample Heated in a Tube Furnace Under Vacuum (opens in a new tab)

  10. Design of x-ray source for real-time computed tomography

    … nor satisfy the need for managing the high thermal loads demanded by real-time CT (30 acquisition frames per second). To add to the current field of knowledge, two x-ray tube concepts are presented in this dissertation. First, a simulation of transient thermal analysis was performed on a …

    must-thes Repository record for Design of x-ray source for real-time computed tomography (opens in a new tab)

  11. An experimental and finite element investigation of thermally induced inelastic deformation of single-level damascene copper high density interconnect structures

    … atomic force microscope was used to investigate thermally induced deformation mechanisms in the areas of copper and polyimide vias in copper-polyimide interconnect structure, as a result of a thermal cycle to 350&deg;C. The copper films exhibited evidence of copper grain boundary sliding, Coble …

    unh-thes Repository record for An experimental and finite element investigation of thermally induced inelastic deformation of single-level damascene copper high density interconnect structures (opens in a new tab)

  12. Electrical-thermal modeling and simulation for three-dimensional integrated systems

    … The major challenges for the modeling and analysis of 3D integrated systems mainly stem from four aspects: (a) the interaction between the electrical and thermal domains in an integrated system, (b) the increasing modeling complexity arising from 3D systems requires the development of …

    gatech Repository record for Electrical-thermal modeling and simulation for three-dimensional integrated systems (opens in a new tab)

  13. Coupled Thermo-Structural Analysis of Steel Reinforced Geopolymer Concrete Structural Members

    This thesis investigates the coupled thermal, flexural and steel–concrete bond response of steel-reinforced geopolymer concrete (GPC) and ordinary Portland cement concrete (OPCC) beam cross-sections subjected to one-sided standard fire exposure. A sequential analytical framework is developed to …

    plymouth Repository record for Coupled Thermo-Structural Analysis of Steel Reinforced Geopolymer Concrete Structural Members (opens in a new tab)

  14. Improving the Accuracy of CFD Method for Windscreen Deicing

    … known the distribution of the defroster ow, transient thermal analysis is performed by use of Solidification and Melting model and modified various boundary conditions. By varying the thermal properties of air from constant to a polynomial function of temperature and followed by modifying the …

    chalmers Repository record for Improving the Accuracy of CFD Method for Windscreen Deicing (opens in a new tab)

  15. Design, Analysis, and Initial Testing of a Fiber-Optic Shear Gage for 3D, High-Temperature Flows

    This investigation concerns the design, analysis, and initial testing of a new, two-component wall shear gage for 3D, high-temperature flows. This gage is a direct-measuring, non-nulling design with a round head surrounded by a small gap. Two flexure wheels are used to allow small motions of the …

    vt Repository record for Design, Analysis, and Initial Testing of a Fiber-Optic Shear Gage for 3D, High-Temperature Flows (opens in a new tab)

  16. TRANSIENT THERMAL FINITE ELEMENT SIMULATION FOR PROCESS MODELING IN WIRE ARC ADDITIVE MANUFACTURING

    This thesis presents the development of a transient thermal framework for Wire Arc Additive Manufacturing (WAAM) created using ANSYS Workbench. This study aims to understand the inherent properties and thermal behavior of WAAM by using the Finite Element (FE) simulation technique to reduce the need …

    mtu Repository record for TRANSIENT THERMAL FINITE ELEMENT SIMULATION FOR PROCESS MODELING IN WIRE ARC ADDITIVE MANUFACTURING (opens in a new tab)

  17. Thermal stress analysis of unidirectional fiber reinforced composites

    … The cracking phenomenon is a result of high thermal stresses that are generated by the mismatch in properties of the composite constituents, particularly the mismatch in the thermal expansion coefficient. The main objective of this study is to understand the micromechanics of such a …

    sask Repository record for Thermal stress analysis of unidirectional fiber reinforced composites (opens in a new tab)

Page 1 of 2