Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Transition boiling"”.
-
Transition boiling of normal pentane from a horizontal flat gold surface
"The characteristic boiling curve for Normal Pentane was determined at 1 atmosphere pressure with particular attention devoted to the transition boiling region. The heat transfer surface was a horizontal, gold-plated, copper disc. Stability analysis was employed to demonstrate why previous …
-
Experimental Investigation of Boiling Heat Transfer Under an Impinging Water Jet
… investigation of JIB within the nucleate and transition boiling regimes. This study focuses on studying JIB within the stagnation zone of a free water jet. An experimental setup has been designed and built at the Thermal Processing Laboratory (TPL) with the capability of carrying out boiling …
-
Heat transfer during run-out table bottom jet cooling of steel
… temperatures in order to obtain representative boiling curves. A range of water flow rates (160-300 l/min), water temperatures (10-40 °C) and jet inclinations (0-20 degrees) were investigated to examine the influence of process parameters on heat extraction rates. The obtained boiling curves …
-
Mechanistic jet impingement model for cooling of hot steel plates
… especially in the temperature range where the transition boiling regime occurs. Based on experimental results, a boiling curve model has been proposed that takes into account boiling heat transfer mechanisms and maps local boiling curves for cooling of stationary steel plates. The effects of …
-
Heat transfer model of the hot rolling runout table-cooling and coil cooling of steel
… very complex procedures, the modeling of the boiling mechanisms is presented as the best way to obtain the local thermal response of steel strips during their processing, and mathematical models for the runout table and subsequent coil cooling are presented as powerful tools to predict the …
-
Mechanistic Modeling of Jet Impingement Boiling
… steady-state experimental study of nucleate and transition boiling under a planar water jet impinging on a flat horizontal copper surface. The maximum attained surface temperature is 560 C and the maximum wall heat flux is 5 MW/m2. The boiling curves under the impinging jet have been obtained for …
-
Computational Thermal Fluid Dynamic Analysis of Cooling Systems for Fusion Reactor Components
… heat sink, operating in the highly subcooled boiling regime, is considered as one of the potential candidates. In order to accurately predict the performance of the system, a thermal hydraulic analysis is required. This thesis employs a Computational Fluid Dynamic (CFD) approach to do the …
-
A STUDY ON CRITICAL HEAT FLUX MECHANISMS AND THE TRANSITION TO FILM BOILING
… to study the critical heat flux (CHF) and the transition to film boiling during pool boiling and submerged jet impingement. Highly resolved temporal and spatial heat transfer measurements were obtained by measuring temperature distributions on the surfaces of an IR transparent test heater with …
-
Quantification of heat transfer associated with water cooling in dies for low pressure die casting
… due to limited fundamental understanding of boiling behavior under transient cooling conditions. This research investigates the evolution of boiling heat transfer regimes in water-cooled steel channels under LPDC-relevant conditions. A lab-scale experimental system was developed using a …
-
Application of Optical Fiber Sensors for Quenching Temperature Measurement
… meltdown greatly increases. While the nucleate boiling and film boiling regimes have been well-investigated, the transition boiling regime between the point of departure from nucleate boiling (DNB) and the minimum film boiling temperature (T<sub>min</sub>) remains difficult to study. This is due …
-
A Study of the Thermodynamic and Heat Transfer Characteristics of Two-Phase Two-Component Flow with Application to a Solar-Assisted Heat Pump
… and heat transfer analysis in the phase transition boiling region, to newly proposed refrigerant mixtures, which are candidates for replacing the classical CFCs for future HVAC applications. The goal of this study is to develop a methodology, to design the collector/evaporator tubes of a …
-
Effect of Surface Active Agents in Boiling Heat Transfer
The boiling heat transfer phenomenon has presented a state o ambiguity regarding the role of solid-liquid-vapour interface in the mechanisms of heat transfer. Recent studies (S1, M1) have given an indication to the possibility of the vaporization of a micro layer at the boiling surface as a …
-
Μελέτη βρασμού με ροή μέσα σε δομημένα μακρο-κανάλια
… is an experimental study of subcooled flow boiling of water in a rectangular cross-section channel (boiling channel). The scope of the work is to investigate the effect of several working parameters and system’s geometric characteristics on the two-phase heat transfer mechanism in order to …
-
Role of surface conditions in the enhancement of heat transfer rates in convective boiling
… the low heat transfer rates associated with film boiling process. The general method to improve heat transfer rates investigated here was to initiate greater liquid-solid contact in convective film boiling by means of macroroughnened surfaces and the application of coatings. Three types of tubes …
-
Transient Two Phase Flows: Refilling and Rewetting of a Hot Horizontal Tube
… The wall was assumed to be in stable film boiling before quenching.</p> <p>A quench model based on a critical water level, (hʟ)crit' determined the transition of heat transfer mode from film boiling to transition boiling and subsequent quenching of the surface. (hʟ)crit was obtained using a …
-
Boiling water heat transfer during quenching of steel plates and tubes
… the factors that can affect the accuracy of a boiling curve prediction including parameters related to both the inverse heat conduction model as well as the temperature measurement technique. During the research, extensive analysis as well as some experiments were done to determine a "best …
-
Simulation of hydrodynamics of the jet impingement using Arbitrary Lagrangian Eulerian formulation
… normally contains different regimes such as film boiling, nucleate boiling, transition boiling and radiation heat transfer. This makes the analysis more complicated. In order to perform the heat transfer analysis often empirical correlations are being used. In these correlations the velocity and …