Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Transition length"”.
-
Prediction of transitional boundary layer properties for CFD software in engineering flows
Two linear combination models for the transition zone in two-dimensional incompressible boundary layers have been programmed into the commercially available computational fluid dynamics software suite of programs, PHOENICS as a sink of momentum. It has been shown that it was possible to use a …
-
Effect of off-fault low-velocity elastic inclusions on supershear rupture dynamics
… a soft inclusion may significantly shorten the transition length to supershear propagation through the Burridge-Andrews mechanism. The higher the material contrast, the shorter the transition length to supershear propagation becomes. Another observation is that supershear rupture is generated at …
-
Run-Up Distance From Deflagration to Detonation In Fast Flames.
In the process of deflagration-to-detonation transition (DDT) in reactive gases, the flame typically accelerates first to the choked flame condition (known as a Chapman-Jouguet deflagration), where it propagates at the sound speed with respect to the product gases. Subsequently, the choked flame …
-
Simulation of proppant transport in slickwater with DNS-derived drag correlations
… bank formation and the equilibrium height and transition length of the end proppant distribution. First, DNS-derived drag correlation predicted slower proppant bank formation compared to other default drag laws, because proppant settling speed is slower in narrow fractures, a factor that to …
-
The Effect of Axial Spacing of Constant and Variable Blockages on the Deflagration-to-Detonation Transition in a Pulse Detonation Engine
… spacing on the deflagration-to-detonation transition section length in a pulse detonation engine. Testing was conducted with one hundred and ninety-five different obstacle, and spacing configurations. The configurations included constant, as well as variable spacing between obstacles. The …
-
Characterization of S-bend optical waveguides fabricated by impurity- and vacancy-induced layer disordering
… using raised-cosine S-bend geometries. The 3-dB transition length for a 100 $\mu$m offset S-bend waveguides fabricated using the Zn, SiO$\sb2$, or In/SiO$\sb2$ IILD process is less than 300 $\mu$m for near single-mode guides. In addition, vacancy-induced layer disordering (VILD) of the native …
-
Model for horizontal tube settlers
… laminar flow profiles at the end of the transition length. Three methods for using the model were established: a computer program, design charts, and an equation;The experimental studies demonstrate the validity of the Fadel Model as a design method for determining particle settling …
-
Investigation of the Hemodynamics of Coronary Arteries - Effect of Stenting
… and velocity gradients. Increasing the stent length, reducing the transition length and increasing the overexpansion caused adverse flow conditions. From this work, detailed flow characteristics and hemodynamic characteristics due to the compliance mismatch and applied motion were obtained …
-
The Evolution of Multi-Site Small Cracks under Fatigue Loading
… the resulting data a micro-structurally based transition crack length is defined to determine the point which separates small and long crack growth. This definition is based upon the observed evolution of scatter in the growth rates of growing small cracks. It is shown that this scatter falls …
-
ANALYZING BLENDED MATERIAL TRANSITIONS PRODUCED BY A DUAL-HOPPER LARGE FORMAT ADDITIVE MANUFACTURING SYSTEM
… The BAAM dual hopper produces blended material transitions in-situ by switching from one material to the next. The primary goal was to characterize the material transition process through analysis of processing parameter effects on transition rate, transition length, and mechanical properties. …
-
Receiver technology for radio astronomy and deep space communications
… a novel approach to reduce significantly the transition length, while retaining a wide operational bandwidth.</p> <p>Finally we present the design of the complete receiver system, which includes the development work and verification of the components that were built for this project.</p>
-
Transition in boundary layer flows
An experimental investigation of transition in boundary layer flows under the influence of various freestream conditions is described.<br/><br/>Velocity profiles are obtained automatically by means of a stepper-motor driven traverse mechanism which carries a hot wire probe connected to a constant …
-
Boundary layer transition in simulated turbine blade flow
… used to conditionally sample the signal in the transition region and hence provide mean laminar and turbulent velocity profiles in the transition region. It also provided a measurement of the intermittency. Boundary layer profiles were measured under the imposed velocity distribution at various …
-
Development of a Transition Prediction Methodology Suitable for Aerodynamic Shape Optimization
… and efficiently predicting boundary-layer transition. Toward the development of a suitable computational design tool, methods for the efficient prediction of boundary-layer transition in a Reynolds-averaged Navier-Stokes-based flow solver and integration in a discrete-adjoint gradient-based …
-
A Component-Based Approach to Modelling Beam-End Buckling Adjacent to Beam-Column Connections in Fire
… connections at elevated temperatures. A transition criterion, to distinguish between cases in which pure beam-web shear buckling occurs and those in which the instability is a combination of shear buckling and bottom-flange buckling, has been proposed, including a calculation procedure to …