Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Transitional Flow Regime"”.
-
Non-Newtonian fluid mixing in agitated vessels in the transitional flow regime
… of fluid mixing in agitated vessels. This flow application has a critical importance in the manufacture of a wide range of intermediates and products in Johnson Matthey. The novelty of the research undertaken is twofold. Firstly, it presents quantitative investigations of the agitation of …
-
Unsteady flow and heat transfer in periodic complex geometries for the transitional flow regime
… transport characteristics of bumped fins in the transitional flow regime using unsteady multi-dimensional solutions of the incompressible Navier-Stokes equations"--Abstract, page iv.
-
A full-scale investigation of roughness lengths in in homogeneous terrain and a comparison of wind prediction models for transitional flow regimes
… estimating the mean and gust wind speeds in the transitional flow regime are investigated and compared to full-scale measurements. Displacement heights and roughness lengths are also investigated for each data collection location. Roughness lengths are calculated from full-scale data using …
-
Verification, Validation and Application of Shear Stress Transport Transitional Model to a R/C Aircraft
… aircraft. The four-equation Menter-Langtry Transitional viscous model in ANSYS Fluent is applied to a number of 2D and 3D airfoils and wings operating within the transitional flow regime, to permit comparison to relevant experimental and numerical results for transition onset, extent, and …
-
The impact of undulating leading-edge modifications on the flow characteristics of NACA 0021 foils
In contrast to active flow control schemes that require an external energy source, passive flow control methods have been of great interest to engineers and scientists, due to their potential in augmenting the performance characteristics of various engineering systems, in addition to reducing …
-
Direct Numerical Simulations Of Coherent Structures In Wave Boundary Layer
… is applied to investigate the boundary layer flows under a surface solitary wave. The numerical results are compared with the analytical solution derived by Liu & Orfilla (2004)[24], and the experimental data obtained from a series of U-tube experiments provided by Sumer et al. (2010)[21]. …
-
INVESTIGATION OF FUEL-AIR MIXING IN A MICRO-FLAMEHOLDER FOR MICRO-POWER AND SCRAMJET APPLICATIONS
… traditionally associated with the laminar to transitional flow regime. Mixing lengths in micro-flameholders based solely on molecular diffusion are also predicted using a modified Burke-Schumann model. The predicted mixing lengths indicate that less distance is required for fuel-air mixing as …
-
Atmospheric reentry modelling using an open-source DSMC code
… thermal protection systems (TPS). Under the transitional flow regime, where chemical and thermal nonequilibrium are predominant, the most successful numerical method for such studies has been the direct simulation Monte Carlo (DSMC) numerical technique. In the present work, the solver …
-
Numerical Simulation of Plasma-Based Actuator Vortex Control of a Turbulent Cylinder Wake
… condition to model the actuator's effects on the flow. Validations of the moving wall for this simulation are set forth with the understanding that the moving wall can model the plasma actuator bulk flow effects at a distance downstream and not in a region near or on the plasma actuator. The …
-
A reactor scale gas dynamics model of an industrial multi-wafer atomic layer deposition reactor using direct simulation Monte Carlo approach
… The model provides detailed insights into the flow physics associated with the transport of the precursor species from the inlets, through wafer feed nozzles, into the inter-wafer regions, and finally through the outlet. The reactor operating conditions are shown to be in the slip/transitional …
-
Leak rate prediction methods for hermetically sealed devices
… are not always accurate when predicting the flow rates of not only condensable gases (e.g. water vapour), but also non-condensable gases. Experimental testing of soldered samples with seals like those in hermetically sealed devices confirmed that predictions using Graham's law could be …
-
Heat transfer near the transition to turbulent fluidization
The turbulent fluidization flow regime, a transitional flow regime situated between bubbling and fast fluidization, has received relatively little attention in the heat transfer literature, despite its advantages for operating commercial gas-solid fluidized bed reactors. This work investigates …
-
On the effects of viscoelasticity in stirred tanks
… vessels (on: i- the power consumption and flow patterns in single phase and gassed systems, ii- mixing time under unaerated conditions and iii- cavities in the presence of gas) and to study the performance of InterMIGs in comparison to the classical six bladed disc turbines. Model …
-
Quantification of Reynolds-averaged-Navier-Stokes Model Structural Hypothesis Uncertainty in Transitional Boundary Layer and Airfoil Flows
… uncertainty it induces on RANS predictions of transitional flows has been ignored so far due to the conceptual complexity involved in the associated uncertainty quantification. This type of uncertainty is called the model structural hypothesis uncertainty. In this thesis, a systematic …
-
Heat Transfer Performance and Piping Strategy Study for Chilled Water Systems at Low Cooling Loads
… under low cooling loads. When the chilled water flow is much lower than the design conditions at low cooling loads, it may lead to the laminar flow of the chilled water in the cooling coils. The main objective of this thesis is to explain the heat transfer performance of the cooling coils under …
-
High Resolution Simulation of Laminar and Transitional Flows in a Mixing Vessel
… describe and characterize the distinct flow regimes existing within a mixing vessel at various rotational speeds. This investigation is computational in nature and simulates the flow within a baffled tank containing a Rushton turbine of the standard configuration. For a Re based on …
-
Development and Application of Quadratic Constitutive Relation and Transitional Crossflow Effects in the Wray-Agarwal Turbulence model
… tool for modern engineering analysis of fluid flow over aircrafts, turbomachinery, automobiles, and many other industrial applications. Accurate prediction of turbulent flows remains a challenging problem. The most popular approach for simulating turbulent flows in complex industrial …
-
A characterization of laminar and turbulent boundary layers for use in an investigation of boundary layer state effects on turbine blade film colling schemes
The boundary layer region of a flow is a primary area of interest when analyzing the effects of various flow phenomena, heat transfer, and skin friction near an immersed object's surface. Characterizing this region yields a proper understanding of mass, momentum, and energy transfer to or from the …
-
Studies of nanoscale movements in fluids: oscillatory cantilevers and active micro-swimmers
… the scaling behavior of unsteady fluid flow. Here, our expansive experimental data and rigorous theoretical analysis suggest that a generalized scaling parameter combining the length and time scales of the flow governs the scaling. Second, we turn our attention to nanoscale movements of …
-
Evaluating spatial and temporal controls on recharge fluxes in a stream-alluvial-bedrock aquifer system
… contains three studies which apply groundwater flow and geostatistical modeling to evaluate spatial and temporal controls on recharge fluxes in a stream-alluvial-bedrock system. Each study is based on a recharge mechanism that occurs within the Denver Basin aquifer system, a regionally …