Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Transmission Line Model (TLM)"”.
-
Traveling Wave Laser Model for Circuit Simulation
This thesis examines current modeling of lasers with the aim to justify the Traveling Wave Model (TWM) as the best alternative for an accurate laser model that is not too costly computationally. The goal is not just to have the best model but to have one that can be incorporated into a SPICE-like …
-
Self-aligned gallium arsenide heterojunction bipolar transistor using refractory metallisation
… of 2 x 10-6 ohm-cm was measured by standard transmission line model (TLM) for measurement of contact resistance. A metallisation system consisting of sequentially evaporated AU/Zn/Au was used for the base and Ni/AuGe/Ni/AU was used for the collector. Alloying with the same condition1 as above …
-
MOCVD nitridinių p-i-n struktūrų formavimas spinduliuotės jutikliams /
… step, variety of measurements were carried out. Transmission line model (TLM) were used to determine sheet and specific contact resistances. It was found that post-growth contact annealing in oxygen-containing atmosphere facilitates in activating Mg dopants and increasing p-type GaN electrical …
-
Experimental Study of DKPP-βT Polymeric Thin Film Transistor
… PTFTs show poor stability compared to the crystalline transistors. The PTFTs can have significant variations of threshold voltage, mobility, on/off ratio even when deposited using the same conditions on the same substrate. Therefore, better understanding of the PTFTs’ physical and chemical …
-
Systematic Extraction Flow and Gate Stack Development for GaN HEMT Devices with MVSG Model
… challenges. The MIT Virtual Source GaN (MVSG) model is a physics based compact model that accurately predicts device behaviour for a wide variety of effects seen in GaN HEMTs. A central contribution of this work is the development of a systematic extraction flow that is easy to understand, yet …
-
Characterisation of Dry Etching Damage in III-V and II-VI Semiconductors
… by measuring the surface conductance using the Transmission Line Model (TLM) technique and Hall measurements. Various dry etching processes have been investigated for example, rf Reactive Ion Etching (rf-RIE) using CH4/H2 and SiCl4, Electron Cyclotron Resonance (ECR-RIE) using CCl2F2/He and Ion …
-
Analysis and design of electrically small, circularly polarized cylindrical microstrip antennas
… has focused on the development of analytical models and techniques for reducing the size, extending the bandwidth and achieving circular polarization for planar embodiments. Conformal microstrip antennas, on the other hand, have a much more limited body of literature spanning the last three …
-
High speed flow measurement devices for gasoline fuel injectors
… control for engine monitoring, performance and modelling to help achieve these efficiency improvements and limit emissions. Currently, there are no real-time and on-engine direct mass measurements of fuel flow in individual cylinders of an engine due to the lack of appropriate measurement …
-
Characterization and Numerical simulation of Gallium Nitride-based Metal-oxide-semiconductor High Electron Mobility Transistor with High-K Gate Stack
… structure, Vernier Alignment Scale structure, Transmission Line Model (TLM) structure, Step Coverage structure and devices with long gate widths. In the fabrication of the devices, the splits of the experiments with different configurations were discussed with focus on the objective of these …
-
Study of Digital AlGaN Alloy Based Heterostructures Using AlN/GaN Short Period Superlattice
… field before breaking down. However, achieving linear ohmic contacts to the 2-dimensional electron gas (2DEG) formed at the interface of AlyGa1-xN/ AlxGa1-xN (y – x ≥ 0.20) High Electron Mobility Transistors (HEMTs) is challenging. Direct contact through the AlGaN barrier is difficult due to …
-
MODELING OF NANOSCALE ELECTRICAL JUNCTIONS AND ELECTRICAL CONTACTS
… goal of this thesis is to develop theoretical models to understand, improve, and control current transport and to reduce contact resistance in nanoscale electrical contacts.First, we study the current density-voltage (J-V) characteristics of dissimilar metal-insulator-metal (MIM) nanoscale …
-
Mathematical modeling of electrocatalytic layers in high temperature polymer electrolyte membrane fuel cells
… Pt catalyst loadings. To this end, mathematical modeling (both 3D & 1D numerical and analytical) is successfully coupled with two electrochemical characterization methods; the steady state polarization (IV) curve characterization method and the Electrochemical Impedance Spectroscopy (EIS) …