Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Transparent ceramics"”.
-
TRANSPARENT CERAMICS & THEIR COMPOSITE SYSTEMS FOR PROTECTIVE WINDOW APPLICATIONS
In this industrially-oriented work, highly transparent magnesium aluminate spinel was fabricated through field assisted sintering of compositional powders under relatively low pressing forces. Additionally, a comparison between reactive and non-reactive sintering was made. To better position …
-
Additively Manufactured Engineered Transparent Ceramics For Laser Gain Media
Transparent ceramics (TCs) offer a key advantage over single crystals as solid-state laser materials, in that their composition can be spatially varied to improve laser performance. In this work, additive manufacturing (AM) techniques were applied to TC fabrication to produce laser gain media with …
-
Enhancing the Hardness of the Multispectral ZnS Transparent Ceramics Through Ga2S3 Incorporation: A Comparative Study of Vapor Transport Deposition and Solid-Solid Reaction Methods
Multispectral zinc sulfide (MS-ZnS) is an important optical ceramic widely used in broadband imaging systems due to its wide transmission range and relatively low cost. However, its modest mechanical properties limit its durability in harsh environments. This dissertation investigates two solute …
-
FABRICATION OF TRANSPARENT CERAMIC LASER MEDIA FOR HIGH ENERGY LASER APPLICATIONS
… crystals using melt techniques difficult. Transparent ceramics are an attractive alternative route to laser hosts since the processing by-passes many of the challenges of refractory crystal melt growth. Moreover, transparent ceramics can possess added benefits relative to single crystals …
-
Fabrication of Alkaline-Earth Fluoride Ceramics for High-Power Lasers via Fusion Casting and Hot Forging
… also be advantageously prepared in the form of transparent ceramics to improve on gain uniformity by eliminating dopant segregation and stress-induced birefringence. Transparent ceramic gain media offer additional benefits in terms of enhanced thermal shock resistance due to their fine …
-
Additive Manufacturing of Multifunctional Materials and Composites
… laser additive manufacturing of transparent spinel ceramics was investigated to reduce porosity and cracking, defects that hindered transparency and mechanical properties. A systematic study of processing parameters revealed that laser power and powder flow rate had the largest …
-
THERMAL POST-FABRICATION PROCESSING OF Y2O3:Tm CERAMIC SCINTILLATORS
… on the luminescence and scintillation of Y2O3:Tm transparent ceramics were investigated. The material's microstructure, optical properties, and scintillation properties were characterized using X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, …
-
Synthesis and Characterization of Novel Li-Containing Garnet Ceramic Scintillators for Nuclear Security Applications
… material should be a non-hygroscopic optically transparent compound with a high Z-effective, high density and a high Li content that can be produced using a scalable, cost efficient synthesis process. Currently, no such material is available, and, as such, one goal of this dissertation is to …
-
Quantification of Non-stoichiometry and Impurities in Transparent YAG Ceramics by Laser-induced Breakdown Spectroscopy (LIBS)
Transparent ceramics are an important class of optical materials with applications in street-lighting, high-strength windows, electro- and magneto-optical isolators, high-power laser gain media and nuclear radiation detectors. Compared to single-crystal growth, ceramic processing enables size …
-
Barium Based Halide Scintillator Ceramics For Gamma Ray Detection
… appropriate sintering conditions for hot pressed ceramics of BaBrI and BaCl2. Possible sources of optical loss in the first phase of hot pressed samples are investigated using a wide range of characterization tools. Preliminary luminescence and scintillation measurements are reported for a …
-
Highly-Sensitive Stoichiometric Analysis of YAG Ceramics Using Laser-Induced Breakdown Spectroscopy (LIBS)
Transparent ceramics are an important class of optical materials with applications in high-strength windows, radiation detectors and high-power lasers. Despite the many successful developments of the past decades, their challenging fabrication still needs to be perfected to achieve a better …
-
Stress-induced Phase Change Sintering: A Novel Approach to the Fabrication of Barium Chloride Transparent Ceramic Scintillators
… techniques. One particular solution is Eu:BaCl2 transparent ceramics processed by the novel phase-change sintering technique. Typically, optical transparency in BaCl2 would be limited by birefringence scattering at grain boundaries due to mismatch in refractive index. Traditional ceramic …
-
Fabrication of LuAG:Pr Ceramics
… the incorporation of Pr into LuAG crystals make transparent ceramics of this material an attractive alternative. In this work, (Lu1-xPrx)3Al5O12 powders and ceramic bodies with different Pr concentrations, from x = 0.0001 to x = 0.05 were fabricated and characterized. The luminescence …
-
Compositionally Complex Rare-Earth Aluminum Garnet Ceramic Scintillators for High-Energy X-ray Radiography Applications
… wet chemistry methods and then fabricated into transparent ceramics via uniaxial hot pressing and hot isostatic pressing. Physical characterization is done via powder XRD and SEM imaging, and scintillation properties such as light yield, decay time, and afterglow are assessed. A variety of …
-
Effects of Cerium Concentration and Scattering Centers on the Performance of GAGG Transparent Ceramic Scintillators
… crystalline structure enables the fabrication of transparent optical ceramics, effectively addressing certain limitations associated with single-crystal growth. However, the production of highly transparent ceramics often involves costly processing methods with low overall yield. Reactive …
-
Fabrication and Characterization of Nonlinear Optical Ceramics for Random Quasi-Phase-Matching
… (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT) and ZnSe transparent ceramics for applications in the mid-IR. The main challenge associated with the fabrication of high transparency PMN-PT ceramics is to avoid the parasitic pyrochlore phase. The most effective method to suppress the formation of this …
-
Nanocomposite glass-ceramic scintillators for radiation spectroscopy
… materials research has centered on sintered transparent ceramics, phosphor-doped organic matrices, and the development of novel single crystal compositions. Some of the most promising new materials are glass-ceramic nanocomposites. By precipitating a dense array of nano-scale scintillating …
-
The Role of Oxygen Impurities in γ-phase Calcium Lanthanum Sulfide for Infrared Applications
… thesis investigated the role of oxygen in CLS ceramics as it applies to the resulting optical quality of the processed ceramic. The research done specifically examined ceramic materials with high La- content, prepared by hot pressing and hot isostatic pressing. The materials chosen for this …
Page 1 of 2