Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 76 for “"Transverse Cracking"”.
-
A study of transverse cracking of asphalt pavements in Manitoba
Transverse cracking of bituminous pavements is a form of pavement distress which induces losses in pavement peformance and reduction in pavement service life. To alleviate the problem, more information is needed about the mechanism of transverse pavement cracking and the low temperature properties …
-
Hot ductility and its relationship to transverse cracking in steels
… very detrimental to hot ductility and to avoid transverse cracking, it is suggested magnetic stirring be used in the mould to break up the columnar structure.
-
Stress transfer, stiffness degradation and transverse cracking in composite laminates
… laminates are prone to the formation of transverse cracking during both manufacture and service. It has been well recognised that the core to this damage mode is stress singularities near transverse cracks. In addition, transverse cracking may cause degradation in the thermoelastic …
-
Field investigation of transverse cracking in jointed concrete pavements (JCP's)
Thesis (M.S.)--Michigan State University. Department of Civil and Environmental Engineering, 1998
-
Stiffness reduction resulting from transverse cracking in fiber- reinforced composite laminates
… including fiber breakage, delamination, and transverse cracking, have been observed to contribute to the mechanical degradation of fiber-reinforced composite laminates. In this investigation, the effect of transverse cracking on laminate stiffness was studied. Four. glass-epoxy laminates …
-
Detection of transverse cracking in a hybrid composite laminate using acoustic emission
Transverse cracking detection in a uniaxially-loaded symmetric cross-ply hybrid laminate containing 0◦ IM7/8552 carbon/epoxy and a very thin 90◦ S2/8552 glass/epoxy layer is studied using the acoustic emission (AE) technique. By conducting modal-based AE experiments and analysis, we investigate …
-
Finite Element Modelling Investigation of Transverse Cracking During Continuous Casting of Steel
… the surface temperature at unbending to predict transverse cracking during secondary cooling. It was found that the susceptibility to cracking increased with lower casting speed and increased water spray cooling. Increasing the casting speed had a negligible effect, and it was found to decrease …
-
Thermal-Fatigue and Thermo-Mechanical Equivalence for Transverse Cracking Evolution in Laminated Composites
… thermal fatigue loading. In this study, micro-cracking damage evolution in laminated composites subjected to monotonic cooling and thermal cyclic loads is developed through a theoretical model. Since matrix-damage predictions requires precise knowledge of the temperature-dependent properties, a …
-
Impact of asphalt mixture design parameters on transverse cracking performance and laboratory testing results
In cold climate regions, thermal cracking of asphalt pavements is a primary pavement distress. Cold climates cause thermal contraction within the pavement. When combined with the brittle behavior of asphalt at low temperatures, the thermally induced stresses are relieved by transverse cracks …
-
Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates
The characteristics of thermally-induced transverse cracks in T300/5208 graphite-epoxy cross-ply and quasi-isotropic laminates were investigated both experimentally and analytically. The formation of transverse cracks and the subsequent crack spacing present during cooldown to -250°F (116K) and …
-
Effect of temperature variations on premature cracking of dowel jointed concrete pavements
… concrete pavements exhibit premature top-down transverse cracking at mid slab leading to a dramatic decrease in pavement service life. In the past, such cracks were attributed to combined stresses caused by the temperature differential through the slab thickness and heavy vehicle joint loading. …
-
Calibrated mechanistic design procedure for jointed plain concrete pavements
… distresses. The distresses considered are slab transverse cracking, joint faulting and joint spalling.
-
Sensitivity of thermal properties of pavement materials using mechanistic-empirical pavement design guide
… all of the cases produce reasonable values for transverse cracking, faulting, punchouts, rutting, alligator cracking, IRI. The transverse cracking model in jointed plain concrete pavement (JPCP) is sensitive to coefficient of thermal expansion (CTE), thermal conductivity and climate. Faulting …
-
Multiscale characterization of carbon fiber-reinforced epoxy composites
Transverse cracking is an early form of damage in fiber-reinforced composite materials that can nucleate delamination, fiber breakage, and ultimate failure. Although many variables influence transverse cracking, little work has been done to characterize local and complex microstructural features …
-
The effect of alloying composition and cooling rate on the hot ductility of TWIP steel and mechanical properties of hot rolled HSLA steel
… range of 700°C 1100°C to assess likelihood of transverse cracking. The tensile specimens were soaked at 1250°C then cooled at 12 or 60°C min-1 to the test temperature and then strained to failure at 3 x 10-3 s-1. Reduction of area was measured after failure to indicate whether the steel can be …
-
Field Evaluation of Asphalt Overlays on State Route 30 in Northern Utah
… of this research was to compare the rutting, cracking, and development of roughness of two asphalt overlay types commonly used in northern Utah and to evaluate how well the Mechanistic-Empirical Pavement Design Guide (MEPDG) can predict the observed results. AC-10 and PG 64-34 asphalt overlay …
-
Preliminary Study of Highway Pavement and Materials
… in-place air voids and other factors on fatigue cracking using Long-Term Pavement Performance data, (b) fracture properties of asphalt concrete in a semicircular bend (SCB) test using a noncontact camera and crosshead movement, and (c) hot applied modified-binder-chip-seal field performance in …
-
IGFEM modeling of transverse failure in carbon-epoxy composites and implementation of the IGFEM in Abaqus FEA
… and against strain measurements of the onset of transverse cracking performed on a [0/90/0] carbon/glass-epoxy laminate. Furthermore, a large dataset of realistic virtual microstructures is created from optical images of test specimens and was simulated to study the effects of microstrucutural …
-
Long Term Performance Evaluation of Cold In-Place Recycling (CIR) Technique In Nevada
… by individual distresses such as longitudinal cracking, fatigue cracking, transverse cracking, block cracking, roughness and rutting using NDOT's pavement management system data. In addition, overall condition of the pavement was evaluated using PCI values. A statistical approach called …
Page 1 of 4