Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 331 for “"Trays"”.
-
Flow patterns on sieve trays
… were carried out on commercial scale sieve trays where the ratio of froth depth to flow path length is typical of that found in practice. Experiments were conducted on a 2.44 m diameter air-water distillation simulator, in which flow patterns were investigated by direct observation, using …
-
Flow patterns on distillation trays
… these areas. A comparison of data collected on trays with different hole diameters showed that the larger hole diameter inhibited the on-set of separation to a greater extent than small hole diameters. The tray efficiency was affected by a combination of the better mixing on smaller hole trays …
-
Design of multipass fractionating trays
<p>Multipass fractionating trays are vapor-liquid contacting devices with high liquid handling capabilities which can be economically used in large fractionating towers. However, process design engineers in the chemical and petroleum industries seem to have an aversion to specifying multipass trays …
-
Hydraulic characteristics of showerdeck trays
<p>The hydraulic operating characteristics of the showerdeck tray were investigated. Air-water studies were made using a four plate, 11 1/4 inch I. D. plexiglas column.</p><p>Entrainment, liquid froth height, and pressure drop data were obtained at varying liquid and vapor rates.</p><p>Entrainment …
-
Flow patterns and performance of distillation trays
… flow pattern, particularly for large diameter trays. Scale·up failures due to liquid channelling have occurred, and it is known that fitting flow control devices to trays sometirr.es improves tray efficiency. Several theoretical models which explain these observations have been published. …
-
Seal strength models for medical device trays
… prediction of seal strength for medical device trays. A new methodology was developed and used for identifying burst and peel locations and comparing burst pressure and peel force. Multiple linear regression was used to fit 76 models, selecting the best models based on the Akaike Information …
-
Effect of liquid flow patterns on distillation trays
The thesis describes experimental work on sieve trays in an air-water simulator, 2.44 m in diameter. The liquid flow pattern, for flowrates similar to those used in commercial scale distillation, was observed experimentally by water cooling experiments, in which the temperature of the water is …
-
Flow patterns, performance and scale-up of distillation trays
… nature of liquid flow across industrial sieve trays operating in the spray, mixed, and the emulsified flow regimes. In order to overcome the practical difficulties of removing many samples from a commercial tray, the mass transfer process was investigated in an air water simulator column by …
-
Computer simulation of liquid flow patterns on distillation trays
… modelling of liquid flows on distillation trays. A mathematical model is presented based on the principles of computerised fluid dynamics. It models the liquid flow in the horizontal directions allowing for the effects of the vapour through the use of an increased liquid turbulence, …
-
Further studies on flow distribution on distillation sieve trays
… deflection baffles in conventional distillation trays as flow straightening devices, with the view of enhancing tray efficiency. The mode of operation is based on deflecting part of the liquid momentum from the centre of the tray to the segment regions in order to drive stagnating liquid at the …
-
Development of active packaging trays with ethylene removing capacity
ABSTRACTDEVELOPMENT OF ACTIVE PACKAGING TRAYS WITH ETHYLENE REMOVING CAPACITY ByGauri Sudhir AwalgaonkarActive packaging is an innovative packaging solution to recent consumer demands for fresher and safe produce for longer periods. Ethylene-removing packaging can take away ethylene from the …
-
Accuracy of Digital Indirect Bonding Technique Utilizing 3D-printed Trays
… bonding (dIDB) technique utilizing 3D-printed trays and the effects of dental crowding and tooth type on bracket placement accuracy. Material and Methods: Thirty digital mandibular models of various amounts of arch length discrepancy (ALD) were categorized into 3 groups according to the amount …
-
The design and manufacture of institutional trays using simultaneous engineering
<p>This study evaluates thermoformed trays as used in the food service industry. The resin used in fabricating trays is a blend of Acrylonitrile Butadiene Styrene (ABS) and Polycarbonate (PC). The life of the trays is presently between 1 to 3 years. The trays are used in correctional facilities and …
-
EFFECTIVENESS OF DISPLAY TRAYS ON ATTENTION AND PURCHASE OF CONSUMER PRODUCTS
… consumer perception and preference of display trays in the retail environment was examined and evaluated. Purchase decision and eye-tracking data was collected, as well as qualitative survey information, to determine if participants favored packages in a display tray opposed to packages placed …
-
Utilization of the vacuum form machine: Custom mouthguards versus esthetic bleaching trays
… mouthguards, 60.2% recommended home bleaching trays, 37.6% provided patient information on mouthguards, 37.1% provided patient information on home bleaching trays, 16.5% inquired on patient questionnaires about mouthguard protection during contact sports,and 17.3% inquired on patient …
-
Effects on Initial Fixation of Cementless Tibial Trays in Total Knee Arthroplasty
… the initial stability of cementless tibial trays using a 6-degree of freedom (6-DOF) robotic joint simulator, the AMTI VIVO, and combined loading scenarios replicating physiological loads experienced in vivo such as gait, stair descent and deep knee bending cycles. Prior to testing, …
-
Effects of storage time on resin composite attachment characteristics in aligner template trays
… fabricated using clear aligner template trays. Specifically, the study assessed how storage time influenced the microhardness, ambient light-induced polymerization, and shear bond strength of attachments bonded to enamel under simulated clinical conditions. Methods: Resin composite …
Page 1 of 17