Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 61 for “"Tribological tests"”.
-
Lubrication performance of biolubricants
… has been investigated using tribology. Tribological tests have been performed on a pin-on-disk tribometer in order to investigate the lubrication performance of this novel lubricant and more specific to evaluate its stability. The tribological properties of the CNC Suspensions in two …
-
Instrumentação de um tribômetro com espectroscopia Raman para avaliação in situ da formação de filme lubrificante
… systems that act under relative motion. The tribological tests were carried out at boundary lubrication regime, with low speed, and at three loads, 100 N, 150N, and 200 N. Also, the Raman analysis was performed on the wear track during the tests every 10 minutes. The tribopar was made of SAE …
-
Desgaste de polímeros estruturais de engenharia em contato de deslizamento com cilindro metálico
… along counterbody. Thus, the experimental tests were standardized using two position of the two bearings (Fixed or Free) and seven different positions along the counterbody, that permit print different conditions to the stiffness from system. Others parameters as applied normal load, …
-
Design of Polymer Composites With Improved Adhesion and Wear Properties
… of ATSP oligomer was cast on a metal surface. Tribological tests showed that when ZonylRTM was present as a third body during sliding, the ATSP system had low friction and much lower wear compared to a commercial PTFE based coating. TOF-SIMS analysis showed that ZonylRTM particles had migrated …
-
A Novel Composite with Nacreous Designed to Resist Wear and Corrosion
… polarization technique, Vickers hardness and tribological tests. Experimental results showed that the corrosion resistance increases as the nacreous concentration increases. The hardness and wear resistance increased for up to 22% and 10% respectively due to the reinforcement effects of …
-
WS2 nanoparticles as lubricant additives
Due to their excellent tribological properties and potential to replace problematic lubricant additives currently in use, WS2 nanoparticles (NPs) have spurred considerable interest from academia and industry over the last two decades to decipher their mechanism of action.<br/>To elucidate the …
-
Deposition, surface analysis and tribological characterization of pattern-bonded lubrication on magnetic hard disks
… AND THE LUBRICANT IS STUDIED BY TWO TYPES OF TRIBOLOGICAL TESTS. THESE RESULTS DEMONSTRATE THE PATTERN BONDING CONTROLS THE LUBRICANT TRANSFER FR
-
Lubrication and Tribological Performance Optimizations for Micro-Electro-Mechanical Systems
… cyclopentane (MAC) was developed. Extensive tribological tests using reciprocating sliding and actual MEMS tribometry were conducted. The second approach utilized the concept of hydrodynamic lubrication and selective surface modification for MEMS. In the interests of fluid-film liquid …
-
Preventing Thermal Degradation of Pvc Insulation by Mixtures of Cross-Linking Agents and Antioxidants
… PVC after thermal exposure. We performed tensile tests, tribological tests, profilometry, scanning electron microscopy(SEM) and water absorption determination before and after thermal exposure at 136 ℃ for 1 week. After adding the agents, elongation at break increased by 10 to 20 % while the wear …
-
Relationship between processing, structure and tribological behaviour of carbide reinforced plasma sprayed coatings
… low pressure conditions and were evaluated with tribological tests at room temperature and at 550 °C.NiCr alloy has been selected as the metal matrix and two approaches were followed for the development of the new materials:i.Mo and Fe-Al-Ti have been added in the NiCr metal matrix in order to …
-
Investigação do comportamento de um aditivo para óleos lubrificantes por meio de ensaios tribológicos e técnicas de caracterização de nanomateriais
… synthetized during the wear process. Tribological tests were conducted on a rotative tribometer at the fourball and pin-on-disc configurations, using two basic oils with different viscosities (27cSt and 107cSt at the temperature of 40ºC). The results of wear, friction coefficient and …
-
Análise do desgaste em amostras de ensaios de lubricidade utilizando processamento de imagens
Tribological tests are developed as a controlled way to evaluate the wear mechanism acting between metallic surfaces, as well as to observe the influence of the type of lubricant used. Lubricity is an important characteristic for the evaluation of lubricating fluids, standardized by standard and …
-
Avaliação do comportamento tribológico de compósitos poliéster/fibra de vidro utilizando resíduos de poliéster/fibra de vidro e carbonato de cálcio como carga
… for hot compression mold and compared tribological to composites with filler CaCO3, generally used as filler, targeting a partial replacement of CaCO3 by such waste. The composites were characterized by thermal analysis (TGA, DSC and DMA), by the surface integrity (roughness …
-
Characterization and Reduction of Friction in a Hybrid Transmission
… based measurements.</p> <p>Additionally, tribological tests were performed on pin-on-disc samples which were treated with various surface treatments. The resulting wear surfaces were then studied using optical and Scanning Electron Microscopy (SEM) as well as Raman Spectroscopy. These …
-
Relación microestructura-propiedades y comportamiento tribológico de nuevos nanocomposites
… incorporated into a PMMA matrix to enhance its tribological properties. As a result, different concentrations of graphene oxide, some of them functionalized with 1- octyl-3-methylimidazolium tetrafluoroborate ([Omim]BF4) room temperature ionic liquid, have been added and melt-blended by …
-
Obtenção do carbeto de alta entropia (TiVTaNbW)C via moagem de alta energia
… Hardness, Confocal Microscopy, and Pin-on-Disk tribological tests. XRD revealed characteristic carbide peaks, while SEM showed carbide regions and the surface element distribution. FTIR indicated typical metal-carbon bonding bands, and SPS improved the material’s properties, reaching a Vickers …
-
Tribological Analysis of Heat Treatments on Medical Grade Cobalt Chromium Molybdenum Alloys
… analysis, hardness measurements, and tribological and corrosive wear tests were performed. Tribological tests were performed using a pin on disk wear test for two million cycles, while corrosion testing was performed using a potentiostat and 3-electrode-cell in bovine serum to simulate …
-
Cellulose nanocrystals aqueous suspensions as water-based lubricants
… such as renewable, biodegradable and non-toxic. Tribological tests were performed on a pin on cylinder tribometer to investigate the application of CNC as water-based lubricants additives. The coefficient of friction and wear between a stainless-steel shaft and a chrome steel ball were measured …
-
Obtenção e estudo do comportamento dos filmes finos multicamadas TiSiN/TiSiC depositados em aço AISI 4340 usando a técnica de deposição por plasma em cilindros catódicos
… Dispersive Spectroscopy (EDS), microhardness and tribological tests (friction coefficient and wear volume), and profilometry analysis to evaluate surface roughness. The results showed that the deposited layers exhibited the typical composite phases of multilayers, with the corresponding …
-
Lubricidade de biodiesel e sua associação com a vibração e nível de pressão sonora oriundos do contato esfera-plano sob deslizamento alternado
… of signatures of these signals obtained during tribological tests are an important non-intrusive tool for evaluating of the lubricity of these fuels, whose representation in the time domain not always reveals trivial information. This requires signal transformation to the frequency domain using …
Page 1 of 4