Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 219 for “"Tribometer"”.

  1. Tribometer-Based Quantifying of Friction in Metal Cutting

    … of a heavy load, high temperature pin on disc tribometer. The goal of performing this testing on the tribometer is to simulate realistic machining conditions experienced between a tool and workpiece ‘offline’ in order to reduce the number of real machining trials used to select a tool coating …

    mcmaster Repository record for Tribometer-Based Quantifying of Friction in Metal Cutting (opens in a new tab)

  2. Factors Affecting Lubricant Lifetime in the Spiral Orbit Tribometer Under Vacuum

    … using a unique facility, The Spiral Orbit Tribometer (SOT), employing oil plating techniques to characterise the degradation behaviour of existing vacuum lubricants, to attempt to mitigate their known poor-performance issues, and to identify and characterise the next generation of …

    cent-lancashire Download PDF for Factors Affecting Lubricant Lifetime in the Spiral Orbit Tribometer Under Vacuum (opens in a new tab)

  3. Tribometer with programmable motion and load to investigate the influence of molecular structure on wear of orthopaedic polyethylene

    … counter-bearing. A novel six-station, wear tribometer, featuring programmable load and motion, was designed to further the investigation into wear, sub-surface plasticity and debris generation of UHMWPE. This thesis describes the pin-on-plate device, its validation and subsequent use to …

    edinburgh Repository record for Tribometer with programmable motion and load to investigate the influence of molecular structure on wear of orthopaedic polyethylene (opens in a new tab)

  4. Design and fabrication of a twin disc tribometer and a study of wear and friction of hardened 1060 steel under combined rolling and sliding

    … loading and sliding conditions. A twin-disc tribometer was designed and built for studying wear of steels under combined rolling and sliding contact. The samples were made from 1060 steel in the form of circular discs and heat treatment was performed to attain hardness of ~330 HV. Thirteen …

    uiuc Repository record for Design and fabrication of a twin disc tribometer and a study of wear and friction of hardened 1060 steel under combined rolling and sliding (opens in a new tab)

  5. Projeto, fabricação, construção e testes de um tribômetro FZG reduzido com carregamento variável

    … pair. Thus, this work aims to build and test a tribometer capable of reproducing the contact between cylindrical spur gears in order to promote wear on their previously selected teeth. The conceptual design was based on the tribometer developed in the FZG Institute from the Technical University …

    brazil-ufrn Repository record for Projeto, fabricação, construção e testes de um tribômetro FZG reduzido com carregamento variável (opens in a new tab)

  6. FEA MODELING OF A TRIBOMETER’S PIN AND DISK INTERACTION

    <p>A bench scale tribometer, developed at the McMaster Manufacturing Research Institute (MMRI) was designed for mimicking the friction and wear conditions on the rake face of a metal cutting tool. It provides insight into the performance of cutting tools operating under high stress and high …

    mcmaster Repository record for FEA MODELING OF A TRIBOMETER’S PIN AND DISK INTERACTION (opens in a new tab)

  7. Tribological and Tribochemical Behaviour of Machine Elements Having DLC/Cast Iron Interfaces and Lubricated with MoDTC-Type Friction Modifier

    … interface. Results obtained from MTM tribometer showed that the sliding/rolling ratio affects friction, wear and tribochemistry in CI/DLC systems; pure sliding enhances MoDTC activation. MoDTC decomposes to form MoS2, FeMoO4 and not MoO3. In addition, it was observed that the …

    whiterose Download PDF for Tribological and Tribochemical Behaviour of Machine Elements Having DLC/Cast Iron Interfaces and Lubricated with MoDTC-Type Friction Modifier (opens in a new tab)

  8. Tribological Evaluation of Polymer Matrix Composites for Green Alternative Replacement in Alpine Sports: Scaling up between Laboratory and Field Testing

    … confocal laser scanning microscopy (CLSM), tribometer tests utilizing a ball-on-disk linear tribometer (Anton-Paar TRB3 tribometer), contact angles, and time trials on High Density Polyethylene (HDPE) synthetic ice. Field testing incorporates the use of inertial measurement units (IMUs) …

    concordia Download PDF for Tribological Evaluation of Polymer Matrix Composites for Green Alternative Replacement in Alpine Sports: Scaling up between Laboratory and Field Testing (opens in a new tab)

  9. Microstructure-property relationships in Cr(C)N coatings

    … of friction was obtained using pin-on-disk tribometer. Deformation and fracture behaviour of the Cr(C)N coatings was determined using UMIS nanoindentation and pin-on-disk tribometer, followed by cross-sectional FIB and TEM analysis. Crack can only be observed in the Cr(C)N coatings with low …

    unsw Repository record for Microstructure-property relationships in Cr(C)N coatings (opens in a new tab)

  10. A Study of Walkway Safety and Evaluation of Tribological Test Equipment

    A walkway tribometer measures the coefficient of friction between flooring material and a test foot. The value of the coefficient of friction is an indicator as to whether the flooring surface is slippery and has a propensity to cause slip and falls. This study determined that one style of …

    unf Repository record for A Study of Walkway Safety and Evaluation of Tribological Test Equipment (opens in a new tab) Download PDF for A Study of Walkway Safety and Evaluation of Tribological Test Equipment (opens in a new tab)

  11. A METHOD FOR ASSESSING THE TRIBOLOGICAL PERFORMANCE OF TOOL AND WORKPIECE INTERACTIONS

    … them using a heavy-load high-temperature tribometer. A high normal load was applied to plastically deform the workpiece material. The contact zone was then heated up using a resistance heating method. The normal load should be in the range that can generate a plastic flow on the surface of …

    mcmaster Repository record for A METHOD FOR ASSESSING THE TRIBOLOGICAL PERFORMANCE OF TOOL AND WORKPIECE INTERACTIONS (opens in a new tab)

  12. Etude biomecanique articulaire chez le cheval par tribometrie et analyse dynamique inverse

    … were measured by tribometry using a pin-on-disc tribometer in Coulomb’s regime. The effects of age and load on the frictional response were studied. The second approach was an ex vivo macro-systemic model of the diarthrodial cartilage-cartilage contact : from whole fetlock joints fixed into an …

    liege Repository record for Etude biomecanique articulaire chez le cheval par tribometrie et analyse dynamique inverse (opens in a new tab) Download file for Etude biomecanique articulaire chez le cheval par tribometrie et analyse dynamique inverse (opens in a new tab)

  13. Tribological Characterization of Surface Engineered Tooling for Metal Cutting Applications

    … research was to develop a bench scale apparatus (tribometer) for mimicking the friction and wear conditions on the rake face of a metal cutting tool. The motivation for this study was to save test material costs, reduce machine downtime for testing, increase the number of test replicates and …

    mcmaster Repository record for Tribological Characterization of Surface Engineered Tooling for Metal Cutting Applications (opens in a new tab)

  14. Development of Single Cam Rig for Accurate Simulation of Valve Train Tribochemistry

    … this work, a newly modified ‘SLICE’ single cam tribometer, which has incorporated a programmable dynamic speed and lubricant supply system, was designed and employed for the study of cam-follower tribochemistry. Information such as frictional torque and lubricant film thickness were obtained …

    whiterose Download PDF for Development of Single Cam Rig for Accurate Simulation of Valve Train Tribochemistry (opens in a new tab)

  15. Ultrahigh vacuum studies of the boundary lubrication of metals

    A novel ultrahigh vacuum (UHV) tribometer was used to study the tribological behavior of two Cu(111) surfaces modified by the adsorption of various atomic (sulfur, chlorine, iodine) and molecular (ethanol, trifluoroethanol, butanol, and heptafluorobutanol) species as a function of coverage. The …

    uiuc Repository record for Ultrahigh vacuum studies of the boundary lubrication of metals (opens in a new tab)

  16. Tribocorrosion of total hip replacements

    … was undertaken on a reciprocating pin-on-plate tribometer and a single station hip joint simulator. Each test rig was instrumented, with a 3-electrode electrochemical cell, to enable in-situ corrosion monitoring during tribological testing. Testing was focused around 36mm metal-on-metal bearing …

    whiterose Download PDF for Tribocorrosion of total hip replacements (opens in a new tab)

  17. Ocular biotribology and contact lens lubrication mechanisms

    … reproducibly at genuinely low values. The tribometer needed the ability to accommodate the following features: (a) an approximation to eye lid load, (b) both new and ex-vivo lenses, (c) variations in substrate, (d) different ocular lubricants (including tears). The tribometer and measuring …

    aston Download PDF for Ocular biotribology and contact lens lubrication mechanisms (opens in a new tab)

  18. An Investigation of the Effects of N-Butanol on Friction and Wear Patterns When Mixed with Ultra Low Sulfur Diesel

    … Research is presented here on the viscosity and tribometer-tested wear and lubricity of N-Butanol and of its mixtures in ultra-low sulfur diesel. The testing of N-Butanol as a lubricity additive follows the procedure outlined by Mozdzen (Mozdzen 1998). This includes tests of the degradation of …

    gsu Repository record for An Investigation of the Effects of N-Butanol on Friction and Wear Patterns When Mixed with Ultra Low Sulfur Diesel (opens in a new tab)

Page 1 of 11