Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Truss models"”.
-
Advanced three-dimensional analysis of concrete structures using nonlinear truss models
A three-dimensional truss-based simulation of reinforced concrete is presented in this study. The truss model has been implemented to simulate the response of columns under compression, shallow beams under bending, and deep beams under shear. The concrete truss elements are modeled based on …
-
Seismic analysis and evaluation of a building retrofitted with new RC walls
… was evaluated using nonlinear analytical models. The response and performance of the newly-added RC wall components were studied employing nonlinear truss models and strain-based acceptance criteria. The results of the wall evaluations were compared with those obtained using the ASCE/SEI …
-
Numerical Analysis of Reinforced Masonry Shear Walls Using the Nonlinear Truss Approach
… wall structures. Among the various methods, the truss analogy is deemed attractive for its conceptual simplicity and excellent accuracy, as indicated by recent studies focusing on RC walls. This thesis uses an existing modeling method, based on nonlinear truss models, to simulate the behavior of …
-
Behaviour of Prestressed Ultra-High Performance Concrete I-Beams Subjected to Shear and Flexure
… are comprehensively compared to a proposed truss models, linear and nonlinear finite element models. Several design trials intended to allow for an optimized use of the materials and a maximum load capacity was conducted for simply supported beams with one or two external loads, and having …
-
Vibrations and Stability of Axially and Transversely Loaded Structures
… subjected to imposed displacements; • space truss models subjected to dead loads; • suspension bridges under aerodynamic loads. Stability and influence of the applied loads on the natural frequencies are studied using analytical, numerical, and experimental tools. The experimental tests were …
-
Stability bracing behavior for truss systems
The stability bracing behavior of trusses was investigated using experimental testing and computational modeling. The laboratory experiments were conducted on twin trusses fabricated with W4x13 sections for the chord and web members. Spans of 48 and 72 feet were used in the tests that included both …
-
Metal-plate-connected joint and lumber safety factors and their influence on wood truss safety factors
… simulates test of metal:-plate-connected wood trusses was developed. The truss test model built on previous research efforts to simulate ultimate failure of structural systems. For years, lumber failure models have used failure equations that were derived from design equations. This approach …
-
A comparative study between solid, porous, and equivalent homogenous truss structures with embedded metamaterials
… efficiency the metamaterials can provide, a truss structure is analyzed, first with solid truss members and then with three different embedded porous lattices. Additionally, the minimum number of unit cells needed to treat the porous structure as a homogenous solid structure is investigated …
-
Damage location and estimation in large space structures
… for exactly in an equation involving the healthy truss model and a mode identified from the damaged structure. An algorithm for locating and estimating single-element damage is built around this equation. Simulations of the algorithm are performed on two planar truss models. The vector expression …
-
Seismic repair of bridge columns with interlocking spirals and fractured bars
… energy dissipation capacity. Three-dimensional truss models were developed to simulate the as-built and repaired columns and showed efficiency and accuracy in predicting the response of columns under combined cyclic loading including torsion"--Abstract, page iii.
-
Experimental and analytical investigation of the out-of-plane behavior of bridge bent-to-column connections
… degree of conservatism in standard code-based truss models. In the analytical phase, 3D nonlinear finite element analysis (NLFEA) was performed. The FE models were developed to be representative of the geometry of the specimens, loading protocol, and the boundary conditions. The FEA results …
-
Development of a Truss-Arch Model Unified for Flexure and Shear-Critical Interaction of Structural Concrete Members
… with and without transverse reinforcement. The Truss-Arch Model Unified (TAMU) is validated based on experimental observations and from previous studies reported in the literature. The limit analysis approach assumes the failure mechanism occurs when the principal diagonal arch reaches its …
-
Mechanical and Architectural Characteristics of Plain-Weave Fabric under Bi-axial and Pure Shear Loading
… under multi-axial loading. Two theoretical models are presented in this thesis. A sinusoidal unit-cell model has been used to describe the in-plane bi-axial mechanical behavior of plain weave fabrics. A working MathCAD program is attached, where only real physical properties about the fabric …
-
Behavior of reinforced concrete girders under cyclic torsion and torsion combined with shear: experimental investigation and analytical models
… and columns of bridges with outriggers. Reliable models are needed to predict the effect of torsional stresses on a reinforced concrete (RC) member's hysteretic load-deformation response, and also on the monotonic behavior at service and ultimate load levels. Little previous research has focused …
-
Model Validation for a Steel Deck Truss Bridge over the New River
… the methods utilized to model a steel deck truss bridge over the New River in Hillsville, Virginia. These methods were evaluated by comparing analytical results with data recorded from 14 members during live load testing. The research presented herein is part of a larger endeavor to …
-
Cohesive subgraph computation over large heterogeneous information networks
… plenty of attention. Typical cohesive subgraph models include k-core, k-truss, k-ECC, maximal-clique, quasi-clique, etc. Among the cohesive subgraph models, the k-core and the k-truss have been demonstrated to be outstanding, as they can achieve both high cohesiveness and high computational …
-
Computational Simulation of Chloride-Induced Corrosion Damage in Prestressed Concrete Bridge Girders
… girders. The analyses rely on two types of models, namely, beam models and nonlinear truss models. The latter are deemed necessary to obtain reliable estimates of the shear capacity, as beam models are not well-tailored for capturing shear failures. A procedure to account for the reduction …
-
Inelastic web crushing performance limits of high-strength-concrete structural walls
… FE analyses with plasticity-based constitutive models and 2D FE analyses with phenomenological constitutive models to enhance understanding of web crushing capacity in structural walls. The results were compared with test data at the global and local levels to evaluate the performance of …
-
Experimental analysis, numerical and analytical modeling of shear strength mechanisms in Hybrid Steel Trussed Concrete Beams
… the recent scientific literature, Hybrid Steel Trussed Concrete Beams (HSTCBs). Such beams represent a structural typology which usually consists of a steel truss embedded into a concrete core so that, after curing and maturation, the two materials behave as a unique structural system, the steel …
-
Analysis of Glubam Joint Behavior and Truss Model Updating Based on Optimization Algorithms
… and the seismic performance of glubam composite truss systems remains insufficient. Comprehensive design theories and reliable numerical modeling approaches are still lacking. Moreover, integrating artificial intelligence (AI) optimization algorithms into the seismic performance analysis of …
Page 1 of 2