Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Tube bending"”.

  1. The mechanics of ultrasonic tube bending

    The technology of precision bending of tubes has recently increased in importance and is widely demanded for many industrial applications. However, whilst attention has been concentrated on automation and increasing the production rate of the bending machines, it seems that with one exception very …

    aston Download PDF for The mechanics of ultrasonic tube bending (opens in a new tab)

  2. Tube bending with axial pull and internal pressure

    Tube bending is a widely used manufacturing process in the aerospace, automotive, and other industries. During tube bending, considerable in-plane distortion and thickness variation occurs. The thickness increases at the intrados (surface of tube in contact with the die) and it reduces at the …

    tamu Repository record for Tube bending with axial pull and internal pressure (opens in a new tab)

  3. FORMABILITY OF ADVANCED HIGH STRENGTH STEEL TUBES IN TUBE BENDING AND HYDROFORMING

    An investigation of the tube hydroforming process is conducted in order to understand the effect of pre-bending operation on formability in tube hydroforming and assess the application of the newly developed Extended Stress-Based Forming Limit Curve (XSFLC) method to the prediction of failure in …

    waterloo Repository record for FORMABILITY OF ADVANCED HIGH STRENGTH STEEL TUBES IN TUBE BENDING AND HYDROFORMING (opens in a new tab)

  4. Expert system for failure diagnosis in cold bending of metal tubing products

    … been developed in the failure diagnosis of cold bending for metal tube products. This thesis presents the development of an expert system, based on OBJECT LEVELS, for diagnosing failures and defects in tube bending production. This thesis focuses on COLD bending for precision TUBING (not piping) …

    iastate Repository record for Expert system for failure diagnosis in cold bending of metal tubing products (opens in a new tab)

  5. Interaction Between Forming and the Crash Response of Aluminium Alloy S-Rails

    … of aluminium alloy s-rails, due to the tube bending and hydroforming fabrication route were examined. Tube bending, hydroforming and crash experiments were conducted to examine and assess the effects of initial tube thickness, strength, geometry, bend severity, work hardening, thickness …

    waterloo Repository record for Interaction Between Forming and the Crash Response of Aluminium Alloy S-Rails (opens in a new tab)

  6. Interaction Between Forming and Crashworthiness of Advanced High Strength Steel S-Rails

    … carried out to assess the effects of tube bending and hydroforming on the crash performance of s-rail structures manufactured from three different advanced high strength steels, namely DDQ, HSLA350, and DP600. The main impetus for this project is to reduce vehicle weight through …

    waterloo Repository record for Interaction Between Forming and Crashworthiness of Advanced High Strength Steel S-Rails (opens in a new tab)

  7. Collapse of tubes with Lüders bands under bending

    … associated with localized deformation. Bending induces ovalization to the tube that leads to a limit load instability and subsequently to collapse. For thinner walled pipes, the limit load is preceded by wrinkling that precipitates local kinking and collapse. This thesis uses experiments …

    texas Repository record for Collapse of tubes with Lüders bands under bending (opens in a new tab) Restricted access

  8. Electrohydrodynamics of electrospinning process

    … does not depend on the size of the capillary tube. Bending instability of an electrospun jet is considered. A general model is formulated taking into account viscoelastic properties of a polymer fluid. Governing equations for the viscoelastic jet bending are derived and analyzed. Numerical …

    nebraska Repository record for Electrohydrodynamics of electrospinning process (opens in a new tab)

  9. Buckling of Laminated Composite Conical Shells; Theory and Experiment

    … One of the major loading scenarios is the bending load in which composite conical shells can buckle under bending. Although there have been extensive studies on the buckling of conical and cylindrical shells under axial load, buckling under bending receives less attention in the literature …

    concordia Download PDF for Buckling of Laminated Composite Conical Shells; Theory and Experiment (opens in a new tab)

  10. Optimization of tube hydroforming process

    Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2002

    msu Repository record for Optimization of tube hydroforming process (opens in a new tab)

  11. Advanced Carbon Thermoplastic Composite Post-Forming Process-Property Optimisation

    … When applied as tubular structures, CFRP tubes combined the design versatility of the tubular geometry with its desirable material properties, opening up the possibility of a wider range of structural applications from traditional panelling and tub components to spaceframes and piping. …

    anu Repository record for Advanced Carbon Thermoplastic Composite Post-Forming Process-Property Optimisation (opens in a new tab)

  12. Možnosti zamezení vzniku defektů při ohýbání trubek

    Bakalářská práce popisuje nejčastěji se objevující defekty vznikající při ohýbání dílců trubek. První část bakalářské práce se věnuje podrobnému průzkumu těchto nežádoucích jevů. V druhé části je uveden komplexní výčet možností redukce defektů. Pro jednotlivé eliminační metody je uvedena vhodnost a …

    brno-tech Repository record for Možnosti zamezení vzniku defektů při ohýbání trubek (opens in a new tab)

  13. Buckling Failure Boundary for Cylindrical Tubes in Pure Bending

    Bending of thin-walled tubing to a prescribed bend radius is typically performed by bending it around a mandrel of the desired bend radius, corrected for spring back. By eliminating the mandrel, costly setup time would be reduced, permitting multiple change of radius during a production run, and …

    byu Repository record for Buckling Failure Boundary for Cylindrical Tubes in Pure Bending (opens in a new tab) Download PDF for Buckling Failure Boundary for Cylindrical Tubes in Pure Bending (opens in a new tab)

  14. Průzkum a definice mezních parametrů ohybu u stabilizačních tyčí automobilu

    Predkladaná diplomová práca sa zaoberá ohýbaním rúrok ako podprocesom výroby stabilizačnej tyče automobilu. Hlavným cieľom práce je objasniť vplyv nastavovaných procesných parametrov ohybu na výsledný geometrický tvar výrobku a jeho vlastnosti. Práca obsahuje teoretický rozbor vybranej metódy …

    brno-tech Repository record for Průzkum a definice mezních parametrů ohybu u stabilizačních tyčí automobilu (opens in a new tab)

  15. Analýza procesu ohybu trubky

    Diplomová práce se zabývá tématem ohybu trubek technologií navíjení bez stabilizačního trnu. Ohyb trubek je doprovázen řadou defektů vznikajících v důsledku velkých přetvoření tvářeného materiálu. Jeden z hlavních defektů, který je v práci důkladně prozkoumán, je zploštění průřezu trubek neboli …

    brno-tech Repository record for Analýza procesu ohybu trubky (opens in a new tab)

  16. Metody 3D ohybu

    Projekt je vypracovaný v rámci bakalářského studia Strojního inženýrství a zabývá se přehledem moderních metod 3D ohybu součástí. V práci jsou uvedeny jednotlivé metody 3D ohybu, součásti, které se těmito metodami vyrábějí a stroje, na kterých se tyto součásti zhotovují.

    brno-tech Repository record for Metody 3D ohybu (opens in a new tab)

  17. Přípravky a zařízení pro ohýbání trubek

    Bakalářská práce je zaměřena na vytvoření všeobecného přehledu používaných přípravků a zařízení pro ohýbání trubek. Na základě literární studie byl dále vytvořen přehled základních metod používaných pro ohyb trubek. Provedením průzkumu výrobních programů výrobců strojů pro ohýbání trubek byly …

    brno-tech Repository record for Přípravky a zařízení pro ohýbání trubek (opens in a new tab)

  18. Kriteria vzniku defektů při ohybu profilových trubek

    V práci jsou popsány poznatky z technologie ohybu kruhových trubek, jde o popis konvenčních, ale i nekonvečních zařízení. Jsou zde uvedeny technologické parametry v návaznosti na vznik defektů a výpočtové vztahy pro určení ohybového momentu. Tyto poznatky byly zobecněny a využity k řešení změny …

    brno-tech Repository record for Kriteria vzniku defektů při ohybu profilových trubek (opens in a new tab)

Page 1 of 2