Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"Tubes -- Fluid dynamics"”.

  1. Prediction of the pressure drop during forced circulation of the helical flow

    The purpose of this investigation was to perform an experimental evaluation of the pressure drop characteristics for helical flows and compare the results to correlations available in the literature. The results for single-phase turbulent flow yielded a correlation of the form fc/fs = [Re (d/D)^2] …

    ttu Repository record for Prediction of the pressure drop during forced circulation of the helical flow (opens in a new tab)

  2. Deposition of suspensions in a vertical converging tube

    … control volume - finite difference approach. The fluid was assumed to be incompressible and laminar. The particle density was assumed to be uniform at the inlet of the. tube. The velocity profiles for the fluid considered were (a) Uniform profile, (b) Parabolic profile. The angles of convergence …

    njit Repository record for Deposition of suspensions in a vertical converging tube (opens in a new tab)

  3. Motion and Mobilization of Oil Slugs in a Capillary Model Under Stationary Conditions

    In this research, both experimental and numerical investigations are conducted to study the mechanism behind slug flow in a capillary tube. A 1.2 mm inner diameter capillary model is employed to represent the pore structure of porous media. A single oil slug is trapped in the tube and mobilized …

    regina Repository record for Motion and Mobilization of Oil Slugs in a Capillary Model Under Stationary Conditions (opens in a new tab) Download PDF for Motion and Mobilization of Oil Slugs in a Capillary Model Under Stationary Conditions (opens in a new tab)

  4. An abstract model for flow of a two-phase viscoelastic fluid in a tube

    … a suspension of solid particles in viscoelastic fluid. The model consists of a Maxwell model in parallel with a plastic model, which has a yield stress parameter Y. The effect of the solid particles is studied by introducing a function f(φ), where φ is the volume fraction of the solid in the …

    ttu Repository record for An abstract model for flow of a two-phase viscoelastic fluid in a tube (opens in a new tab)

  5. Forced convection heat transfer to a single and two-phase steam/water mixture in a helical coil with radiant heating

    … Solar Power Project. In this design, the working fluid, water, goes successively through the single-phase liquid, two-phase and super-heated vapor regimes in a once-through, helically wrapped tube bundle subjected to nonuniform, asymmetrical radiant heating. Individual segments of the radiation …

    ttu Repository record for Forced convection heat transfer to a single and two-phase steam/water mixture in a helical coil with radiant heating (opens in a new tab)

  6. Measurement of Finned-Tube Heat Exchanger Performance

    … applications requiring heat exchange between two fluids. One important widespread use is in residential air conditioning systems. These residential cooling systems influence the peak demand on the U.S. national electrical system, which occurs on the hot summer afternoons, and thereby sets the …

    gatech Repository record for Measurement of Finned-Tube Heat Exchanger Performance (opens in a new tab)

  7. Two-Phase Flow Pressure Drop Across Thick Restrictions of Annular Geometries

    … restrictions of annular geometries formed when tubes extend through circular holes in tube support plates. Two approaches are discussed and a detailed sample calculation of the one selected is presented. The major areas of discussion are the orientation of tubes-to-tube support plate holes, and …

    ucf Repository record for Two-Phase Flow Pressure Drop Across Thick Restrictions of Annular Geometries (opens in a new tab)

  8. Pressure Drop Across a Tube Support Plate of Trefoil Geometry Used in Steam Generator

    This research is concerned with the presentation of pressure drop experimental results across a restriction of trefoil geometry (tube support plate) used in steam generators. The pressure drops were obtained for single-phase and two-phase of air, water, and their mixtures. The tests were performed …

    ucf Repository record for Pressure Drop Across a Tube Support Plate of Trefoil Geometry Used in Steam Generator (opens in a new tab)

  9. Visual Observations of an Air-Water Mixture Flowing Through a Tube Support Plate With Circular-Hole and Trefoil-Hole Designs

    The flow patterns of an air-water mixture at atmospheric pressure were visually observed through a simulated vertical steam generator tube support plate of circular hole and trefoil designs. Flow oscillations with a period on the order of 0.4 seconds were observed in both support plates at similar …

    ucf Repository record for Visual Observations of an Air-Water Mixture Flowing Through a Tube Support Plate With Circular-Hole and Trefoil-Hole Designs (opens in a new tab)