Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Tundish"”.
-
MOLTEN STEEL INTERACTIONS WITH TUNDISH LININGS AND REFRACTORY GLAZES
… types of refractories: the working lining of the tundish used to serve as an intermediate vessel between the ladle and copper mold, and the various glazed carbon-bearing refractories used to control the flow of steel from the ladle to the tundish and from the tundish to the mold. If steel …
-
Model studies of plasma heating in the continuous casting tundish.
A room temperature water model of a tundish was design, constructed and operated. The model was equipped with a steam heating system that simulates that simulates the tundish plasma heating systems operated by some of the more modem continuous casting plants. Similarity between steam heating in the …
-
Mechanické vlastnosti litiny s kuličkovým grafitem vyrobené metodou Tundish a procesem Initek
… litiny s kuličkovým grafitem pomocí metody Tundish Cover a procesu Initek. V závěru je vyhodnocena struktura materiálu na vzorcích, které byly dodány pro metalografickou analýzu. Výsledné hodnocení struktury materiálu slouží k porovnání mechanických vlastností litiny vyrobené metodou Tundish …
-
Argon Bubble Behavior in Slide-Gate Tundish Nozzles During Continuous Casting of Steel Slabs
"Argon injection into a tundish nozzle is an efficient and widely employed method to reduce nozzle clogging in the continuous casting process. It also affects casting operation and product quality by changing the flow pattern in the nozzle and mold. The current work combines mathematical modeling …
-
Modelling of Multiphase Flows in Continuous Casting
… can be observed when ladle slag enters the tundish due to vortex funneling or sink draining. Apart from emulsification, it can also affect the tundish covering slag layer. Physical modelling was performed using high-speed shadowgraphy imaging to capture the bubbles. Suitable image processing …
-
Modeling of multiphase flow, superheat dissipation, particle transport, and capture in continuous casting of steel
… as: inclusions from upstream ladle refining and tundish, entrainment of mold slag, and argon bubbles which are often injected into the nozzle in order to lessen nozzle clogging. In this study, with the aid of existing models, computational fluid dynamics knowledge, and commercial software ANSYS …
-
Enhancing Steel Cleanliness in Tundishes by applying Physical and Mathematical Modeling
The tundish, being the last vessel which stores steel in liquid state, provides the final opportunity to enhance its quality. Hence, it must be ensured that the tundish acts as a refiner rather than a contaminator. It has been noticed that reoxidation of liquid steel from ambient air aspiration …
-
Μοντελοποίηση και βελτιστοποίηση της λειτουργίας δεξαμενής τροφοδοσίας μη νευτωνικού διφασικού ρευστού
… the design of systems used. The container tundish is one of these systems.Traditionally, the experimental methods used in the design of these containers in tundish, having to do with the use of tests or test patterns with the help of water. These methods are both costly and time consuming. …
-
Designing and modeling of a new continuous steelmaking process
… the subsequent vessels (Reducer, Finisher, and tundish). Continuous de-O, de-S, and alloying would be accomplished in the cone-shaped Reducer before additional de-S and alloy additions as well as inclusion floatation and homogenization in the Finisher would ensure a continuous stream of quality …
-
Effect of casting conditions and clogging on fluid flow in metal delivery system and thermo-mechanical behavior of solidifying shell in continuous casting of steel
… the metal delivery system, which starts from the tundish, then into the Upper Tundish Nozzel (UTN), Submerged Entry Nozzle (SEN), and finally to the mold. It is, also, crucial to understand the effect of turbulent flow on thermo-mechanical characteristics of the solidifying shell inside the mold, …
-
Inclusion behaviour in steel flows through convergent nozzles.
… phase particles, a water model using a perspex tundish and an interchangeable glass nozzle has been built. Turbulence has been almost completely removed from the experimental tundish. Hydrogen bubbles electrolytically generated in water have been used to simulate the inclusions in steel and …
-
Optical Sensor Instrumentation for Enhanced Continuous Caster Development
… caster. Rayleigh OFDR sensors were embedded in tundishes for distributed thermal mapping at 7-mm spatial resolution across ≈4 m. Measurements were taken during preheating, casting, and ladle exchanges, and they revealed refractory dry-out and nonuniform heating, consistent with steam buildup and …
-
Mould thermal response and formation of defects in the continuous casting of steel billets
… roughness of the metal stream plunging from the tundish into the mould pool. Rougher streams entrain more gas in the mould pool creating more bubbles which upon their eruption from the surface generate turbulence and waves. The resulting continuously shifting meniscus interacts with the oil …
-
Modeling of multiphase turbulent flow in continuous casting of steel
… casting of steel, argon gas injection at Upper Tundish Nozzle (UTN) wall or stopper tip is well known to decrease clogging and remove inclusions. Besides this intended gas injection, gas may be passively sucked into the system by negative pressure development inside of nozzles. The injected gas …
-
Innovative refractories for preventing nozzle clogging in continuously cast aluminum-killed steels
"Nozzle clogging in submerged entry and tundish nozzles adversely impacts the productivity and quality of continuously cast aluminum-killed steels. The objective of the research conducted was to develop innovative refractories that are less prone to accretion formation than current materials. …
-
Development of a Novel Thermal Shock test for isostatically Pressed Carbon-Bonded Refractories
… flow-control components such as ladle shrouds, tundish nozzles, and slide gates. Chemical, mechanical, and thermal degradation of these parts can produce severe safety, environmental and economic consequences in steel plants. Standardized tests, however, may not fully characterize the damage …
-
Mold behavior, heat transfer and quality of billets cast with in-mold electromagnetic stirring
… in the pool. At superheats of <20° C in the tundish, high heat extraction in the mold and remelting of the mold generated nuclei facilitate the removal of the superheat well within the mold and the columnar-equiaxed transition is triggered after 10-15 mm of shell growth on both the inside and …
-
Modeling of thermal stress cycling in refractory materials
… significantly. Application to an example tundish operation indicated that the model was capable of analyzing an ideal preheating schedule and was capable of predicting the effect of idle time and multiple thermal cycles on the damage in refractories. However, to predict thermal spalling …
-
Fundamentals of micro-particle removal by liquid oxide
… formed at the submerged entry nozzle between the tundish and the mold. To reduce the effects of aluminum titanate type inclusions, they can be either modified or removed. The current study focused on the removal of Al2O3, TiO2, and Al2TiO5 inclusions by dissolving them in slag in the temperature …
Page 1 of 2