Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 121 for “"Turbofan Engine"”.
-
A theoretical performance investigation of an afterburning turbofan engine
… evaluation of the performance of an afterburning turbofan engine when used for high altitude, high speed flight. The calculated performance is compared with that of a conventional turbojet, and also a combination ram-turbojet, by means of the performance parameters of specific fuel consumption and …
-
Machine Learning-Based Predictive Health Model of Turbofan Engine
Turbofan engine is one of the major elements providing power and thrust for aircraft. Maintaining the engine is vital for both safety and economy of aircraft operation. Besides, for an engine original equipment manufacturer, aftermarket services take account approximately 60% of company's revenue. …
-
Effect of BLI-Type Inlet Distortion on Turbofan Engine Performance
… layer flow through a serpentine inlet into a turbofan engine adversely affects the performance of the engine. The available literature has only yielded studies of the effects of this specific type of inlet distortion on engine performance in the form of numerical simulations. This work seeks …
-
Data-Driven Modeling of Tracked Order Vibration in Turbofan Engine
Aircraft engines are one of the most heavily instrumented parts of an aircraft, and the data from various types of instrumentation across these engines are continuously monitored both offline and online for potential anomalies. Vibration monitoring in aircraft engines is traditionally performed …
-
Fluid Dynamics of Inlet Swirl Distortions for Turbofan Engine Research
… development of aircraft is aimed at improving engine efficiency, while reducing fuel burn, emissions, and noise levels. One way to achieve these is to better integrate airframe and propulsion system. Tighter integration, however, may also cause adverse effects to the flow entering the engines, …
-
Acoustic liner optimisation and noise propagation through turbofan engine intake ducts
… the prediction of fan noise propagation through turbofan engine intakes and its radiation to the far-field. The performance of acoustic liners installed in intakes to attenuate noise is the focus of the study. A commercial CAA (Computational AeroAcoustics) code ACTRAN/TM and an in-house shell …
-
Acoustic optimisation and prediction of sound propagation in turbofan engine ducts
… of noise propagation and<br/>radiation in turbofan engine intakes and bypass ducts, and the optimisation of noise attenuation<br/>by using acoustic liners. A commercial FE/IE code ACTRAN/TM is used<br/>within two shell programs; B-induct for bypass ducts and ANPRORAD for intake …
-
Prediction and control of sound propagation in turbofan engine bypass ducts
… liners in the bypass duct of modern turbofan aeroengines. The liners provide the most<br/>effective means with which to suppress the rear fan noise. It is therefore important to make<br/>the best possible use of the available lined area by optimising the liner configuration. A …
-
The Predicted Performance of a Two-Spool Turbofan Engine in Rainstorms
… to enable the forecasting of a gas turbine engine performance during steady running behaviour. The models can also be used to forecast transient performance, although they were not used for this purpose in the present work. This research was based on the simulation of two conditions. The …
-
A study of thermographic phosphor thermometry in an operating turbofan engine
… turbine blade metal temperatures in an operating turbofan engine test rig. Thermographic phosphors, ceramics doped with a rare earth metal, were bonded to the turbine blades. These phosphors exhibit fluorescence when optically excited by a laser, and both the intensity and the rate of decay of the …
-
A Method to Control Turbofan Engine Starting by Varying Compressor Surge Valve Bleed
… of a study of the starting conditions of a turbofan engine. The research focused on ways to minimize turbine inlet temperature while maintaining an adequate compressor stall margin during engine start by varying the surge valve bleed. Varying the surge valve bleed was also shown to reduce …
-
Extension of Particle Image Velocimetry to Full-Scale Turbofan Engine Bypass Duct Flows
Fan system efficiency for modern aircraft engine design is increasing to the point that bypass duct geometry is becoming a significant contributor and could ultimately become a limiting factor. To investigate this, a number of methods are available to provide qualitative and quantitative analysis …
-
Remaining Useful Life Prediction of a Turbofan Engine Using Deep Layer Recurrent Neural Networks
Turbofan engine is a pivotal component of the aircraft. Engine components are susceptible to degradation over the life of their operation which affects the performance of an engine. In order to direct the necessary maintenance behavior, remaining useful life prediction is the key. This thesis …
-
Design Optimization of the First Stage Fan Blade of a Low Bypass Turbofan Engine
A procedure for solving for and analyzing the aerodynamics, thermodynamics, and blade geometry across the first stage rotor blade under an extreme set of conditions, while altering several design parameters, has been developed and applied. The conditions for which the analyses have been developed …
-
Stereoscopic Particle Image Velocimetry Measurements of Swirl Distortion on a Full-Scale Turbofan Engine Inlet
… the inlet swirl distortion generated by airframe/engine system interactions to identify potential degradation in fan performance and operability in a full-scale, ground testing environment. Efforts are described to address this need by developing and characterizing methods for complex, prescribed …
-
Theoretical Modeling with Validation of a Combined HQ-Liner System for Turbofan Engine Noise Control
… is proposed in this work as a device for Turbofan Engine Noise Control. The approach consists of installing circumferential arrays of HQ tubes on the lined sector of the inlet of a turbofan engine. A theoretical model is developed to predict the performance of this system assuming that the …
-
Predicted Transient Performance of a Derivative Two-Spool Turbofan Engine With a 4-Stage I.P. Compressor
… higher thrust, with a higher overall efficiency engine for civil aircraft, a method of designing a derivative engine from an existing engine is investigated in the present work.
-
A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine
A parametric study of a novel turbofan engine with an auxiliary combustion chamber, nicknamed the TurboAux engine is presented. The TurboAux engine is conceived as an extension of a low-bypass turbofan engine with an auxiliary bypass annular combustion chamber around the core stream. The study …
-
Aerothermodynamic cycle analysis of a dual-spool, separate-exhaust turbofan engine with an interstage turbine burner
This study focuses on a specific engine, i.e., a dual-spool, separate-flow turbofan engine with an Interstage Turbine Burner (ITB). This conventional turbofan engine has been modified to include a secondary isobaric burner, i.e., ITB, in a transition duct between the high-pressure turbine and the …
Page 1 of 7