Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 949 for “"Turbulence Model"”.

  1. Statistically constrained decimation of a turbulence model

    … decimation scheme (CDS) is applied to a turbulence model. The CDS is a statistical turbulence theory formulated in 1985 by Robert Kraichnan; it seeks to correctly describe the statistical behavior of a system using only a small sample of the actual dynamics. The full set of dynamical …

    wm-mary Repository record for Statistically constrained decimation of a turbulence model (opens in a new tab)

  2. Time-Linearization of the Spalart-Allmaras Turbulence Model

    … a steady-state flow field from a full-order model flow solver. The time-linearized flow solver then uses the steady-state flow field to predict the unsteady, complex amplitudes of perturbation in the frequency domain. Together, the full-order model and time-linearized flow solvers predict …

    tamu Repository record for Time-Linearization of the Spalart-Allmaras Turbulence Model (opens in a new tab)

  3. New two-equation turbulence model for aerodynamics applications

    Two-equation turbulence modelling for computational fluid dynamics and especially for analyses of high-lift aerodynamics applications is studied in depth in this thesis. Linear Boussinesq-type modelling is abandoned and a more sophisticated explicit algebraic Reynolds stress modelling (EARSM) …

    aalto Repository record for New two-equation turbulence model for aerodynamics applications (opens in a new tab)

  4. Reduced Basis Method applied to the Smagorinsky Turbulence Model

    … addresses the numerical simulation of models that simulate the behavior of turbulent flows through reduced-order techniques. The numerical simulation of this kind of flows is complex and pricey, as well as necessary to the Eco-efficient building optimized design, among many others …

    sevilla Repository record for Reduced Basis Method applied to the Smagorinsky Turbulence Model (opens in a new tab)

  5. A PANS implementation of k-omega SST turbulence model

    … a Partially Averaged Navier Stokes (PANS) turbulence model is implemented for the standard k-omega Shear Stress model (SST). The source code for the PANS implementation of the k-omega SST turbulence model was developed using the C++ programming language. The dynamic PANS turbulence model …

    chalmers Repository record for A PANS implementation of k-omega SST turbulence model (opens in a new tab)

  6. A modified Baldwin-Lomax turbulence model for turbomachinery wakes

    A critical evaluation of the Baldwin-lomax (Bl) turbulence model for shock/shear layer interactions, reversed flow, and curved, asymmetric wakes is made. No general definition for reference line is available for wakes, and difficulties exist for length scale prediction in complex flows. An entropy …

    vt Repository record for A modified Baldwin-Lomax turbulence model for turbomachinery wakes (opens in a new tab)

  7. Investigation of Vorticity Confinement as a High Reynolds Number Turbulence Model

    … <p>Previous VC investigations into turbulence utilized a constant user-specified confinement strength which is analogous to the Boussinesq assumption. Here, two new models for free turbulence are developed and validated along with a near-wall turbulence model. The models replace the …

    utk-theses Repository record for Investigation of Vorticity Confinement as a High Reynolds Number Turbulence Model (opens in a new tab)

  8. Reynolds-stress turbulence model in the KIVA code for engine simulation

    A Reynolds-Stress Turbulence Model has been incorporated with success into the KIVA code, a computational fluid dynamics hydrocode for three-dimensional simulation of fluid flow in engines. The newly implemented Reynolds-stress turbulence model greatly improves the robustness of KIVA, which in its …

    mtu Repository record for Reynolds-stress turbulence model in the KIVA code for engine simulation (opens in a new tab)

  9. Comparison of turbulence model predictions in rod bundles with supercritical up-flow

    … made using five versions of two-equation RANS turbulence models with accompanying wall treatments. In addition, the temperature distribution in a solid region comprising a heater and sheathing was also computed in some cases. The k-epsilon turbulence model, implemented using CFX and scalable …

    manitoba Repository record for Comparison of turbulence model predictions in rod bundles with supercritical up-flow (opens in a new tab)

  10. Verification and Validation of the Spalart-Allmaras Turbulence Model for Strand Grids

    … on the implementation of the Spalart-Allmaras turbulence model to the strand-Cartesian grid framework. Verification and validation is required to ensure correct implementation of the turbulence model. Mathematical code verification is used to ensure correct implementation of new algorithms …

    utahstate Repository record for Verification and Validation of the Spalart-Allmaras Turbulence Model for Strand Grids (opens in a new tab)

  11. Effect of turbulence model closure coefficient uncertainty on scramjet flow field analysis

    “The numerical modeling of supersonic combustion ramjet (scramjet) engine flow paths plays an important role in the design of hypersonic air-breathing propulsion systems. Due to the complexity of the flow field physics and limited experimental data, numerical models possess uncertainties which …

    must-thes Repository record for Effect of turbulence model closure coefficient uncertainty on scramjet flow field analysis (opens in a new tab)

  12. Development of a third-order closure turbulence model with subgrid-scale condensation

    … representation within many general circulation models provides motivation for the development of a turbulence parameterization capable of better simulating these clouds and their effect on the turbulent structure of the boundary layer. With this goal in mind, this study presents the development …

    colostate Repository record for Development of a third-order closure turbulence model with subgrid-scale condensation (opens in a new tab)

  13. Closure Modeling for Accelerated Multiscale Evolution of a 1-Dimensional Turbulence Model

    Accelerating the simulation of turbulence to stationarity is a critical challenge in various engineering applications. This study presents an innovative equation-free multiscale approach combined with a machine learning technique to address this challenge in the context of the one-dimensional …

    vt Repository record for Closure Modeling for Accelerated Multiscale Evolution of a 1-Dimensional Turbulence Model (opens in a new tab)

  14. Computation of Hypersonic Flows with Lateral Jets Using k-ω Turbulence Model

    … conditions at 30km altitude. The k-w turbulent model is used to model the case. It is apparent from the results that the lateral jet reconstructs the flow field by pushing the conical shock away and creating a large recirculation zone in front of the blunt body. This pushes the reattachment …

    embry-riddle Repository record for Computation of Hypersonic Flows with Lateral Jets Using k-ω Turbulence Model (opens in a new tab)

  15. When Social Allergies Flare Up In Close Relationships: A Relational Turbulence Model Explanation

    … commonly endure rough patches. The relational turbulence model and the social allergy phenomenon may account for such rough transitions. A social allergy is an idiosyncratic social behavior that involuntarily stirs up irritation in an individual, either with or without the intention of the …

    ucf Repository record for When Social Allergies Flare Up In Close Relationships: A Relational Turbulence Model Explanation (opens in a new tab)

  16. Development and Application of Rotation and Curvature Correction to Wray-Agarwal Turbulence Model

    … (RANS) equations in conjunction with a turbulence model are employed for simulation and prediction of turbulent flows. Currently the one-equation (namely the Spalart-Allmaras (SA) and Wray-Agarwal (WA) and two-equation (namely the k-ε and Shear Stress Transport k-ω) turbulence models …

    wustl Repository record for Development and Application of Rotation and Curvature Correction to Wray-Agarwal Turbulence Model (opens in a new tab)

  17. Development and Application of Hybrid Wray-Agarwal Turbulence Model and Large-Eddy Simulation

    … equations in the industry. RANS methods require modeling of turbulence effect (i.e. turbulence modeling) based on empirical relations and therefore often produce low accuracy results for many flows. In recent years, the Large Eddy Simulation (LES) approach has been developed which has shown …

    wustl Repository record for Development and Application of Hybrid Wray-Agarwal Turbulence Model and Large-Eddy Simulation (opens in a new tab)

  18. Evaluation of an Incompressible Energy-Vorticity Turbulence Model for Fully Rough Pipe Flow

    … and suggestions for improving two-equation turbulence models are made. The traditional smooth-wall boundary conditions are shown to be incorrect, and the correct boundary conditions are provided along with sample solutions to traditional models. The correct boundary condition at a smooth …

    utahstate Repository record for Evaluation of an Incompressible Energy-Vorticity Turbulence Model for Fully Rough Pipe Flow (opens in a new tab)

  19. Wall functions for the k - [epsilon] turbulence model in generalized nonorthogonal curvilinear coordinates

    <p>Wall functions are often employed to model turbulent flow near solid walls. A method has not been available, however, for the application of wall functions to generalized curvilinear coordinate systems, particularly those with nonorthogonal grids. A general method for this application is …

    iastate Repository record for Wall functions for the k - [epsilon] turbulence model in generalized nonorthogonal curvilinear coordinates (opens in a new tab)

Page 1 of 48