Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 644 for “"Turbulence Models"”.
-
Reactive Tracers in Turbulence Models
… obtain the governing equations for each of the turbulence models. The procedure is applied to a generalized polynomial reaction function and can be extended to other sufficiently smooth non-polynomial reactions. The Reynolds averaged and filtered reaction equations are analyzed using a …
-
Advanced turbulence models for recirculating flows
… to use an empirical wall function to approximate turbulence quantities for the grid adjacent to the wall and the standard k-e model for the rest of the grids. The wall function is a logarithmic profile correlated from boundary layer data. Moreover, most of the success of the standard k-e model is …
-
Evaluation of Turbulence Models for Unsteady Separation
… separation in the design of flow devices. Turbulence models in combination with the Reynolds-Averaged Navier-Stokes equations are commonly used in the industrial design process due to their low computational cost; however, their performance in predicting steady separations is …
-
Verification of Statistical Turbulence Models in Aerodynamic Flows
… Shear Stress Transport, and k-\u03c9 turbulence models are compared with their CFL3D and FUN3D counterparts. A grid convergence study is performed to measure the change in the results as a function of element size, specifically for the finest meshes. The flows' mean velocity, skin …
-
Turbulence models for non-circular ducts and channels
… predictive procedures for flows in which turbulence-driven secondary motion plays an important role. The focus is on fully-developed flows in closed ducts and open channels of various cross-sectional geometries. Two different turbulence models were evaluated: a complete Reynoldsstress- …
-
RANS turbulence models for FENE-P viscoelastic fluids
The development of robust turbulent viscoelastic models to predict drag reducing behaviour of polymer additives within industrial flows is highly sought after. The main objective of this thesis is to develop Reynolds Averaged Navier-Stokes (RANS) models based on the Finitely Extensible Nonlinear …
-
Temperature Corrected Turbulence Models for High Speed Compressible Flows
Permanent URL: https://doi.org/10.7936/K71V5DDD
-
Study of Second-Order Turbulence Models With Variable Coefficients
Made available in DSpace on 2014-12-14T14:42:15Z (GMT). No. of bitstreams: 1 7913410.pdf: 4283966 bytes, checksum: f931ef6b9d2495623cf2a1280305b31b (MD5) Previous issue date: 1978
-
Assessment of RANS Turbulence Models for Strut-Wing Junctions
… the TBW concept to be practical. However, the turbulence models used in these studies have not been validated for transonic, high Reynolds number, junction flows. This study intends to assess turbulence models by comparing drag and surface streamlines obtained from experiment and CFD. The test …
-
The evaluation of turbulence models using tensor visualization techniques
… Using the glyph, the effectiveness of two turbulence model formulations of the Reynolds stress tensor, the Boussinesq approximation and the Algebraic Reynolds Stress Model (ARSM), are studied. Glyphs based upon these two formulations and experimentally measured Reynolds stresses are …
-
Stochastic estimation of near-wall closure in turbulence models
… estimator, is used to formulate boundary closure models for the numerical large eddy simulation (LES) of turbulence. The stochastic estimation method resolves coherent structure of the wall layer using empirical correlation functions, and provides an accurate estimation of the wall layer …
-
Assessment of RANS Turbulence Models for Hypersonic Flat Plates
… approaches using linear eddy viscosity models for turbulence were not designed and optimized with hypersonic flow problems in mind, and thus have weaknesses that are continuously being studied and addressed. This study evaluates the performance of the Menter Shear Stress Transport (SST) …
-
Refined turbulence models for simulation of IC -engine cylinder flows
Turbulence and turbulent mixing are two of the most important factors that influence the efficiency and emissions level in internal combustion (IC) engines, particularly for diesel engines. This study has been performed with the premise to accurately predict in-cylinder turbulence by employing the …
-
One-dimensional Turbulence Models of Type I X-ray Bursts
… of neutron stars. During the bursts, turbulence plays a key role in mixing the fuels and driving the unstable nuclear burning process. This dissertation presents one dimensional models of photospheric radius expansion bursts with a new approach to simulate turbulent advection. Compared …
-
HIGHER ACCURACY MODELS AND VALIDATION OF LES-C TURBULENCE MODELS
In Labovsky (2020), a new family of turbulence models named Large Eddy Simulation with Correction (LES-C) has been proposed to reduce the modeling error of Large Eddy Simulation (LES) models. There a predictor-corrector technique called defect correction was used, treating a Large Eddy …
-
Assessing the v2-F Turbulence Models for Circulation Control Applications
… are not well understood, and traditional turbulence modeling does not correctly resolve these complex flows (including high speed jet flow, complex shear flows and mixing phenomena, streamline curvature, and other challenging flow phenomena). The recent derivation of the v2-f turbulence …
-
Data-driven Augmentation of Turbulence Models for Complex Fluid Flows
… techniques have emerged that augment RANS-based turbulence models using high-fidelity data. The novel contributions of this thesis in data-driven augmentation of RANS-based turbulence models, categorised under two themes, are: 1) the data in adjoint-based data assimilation, and 2) developing and …
-
Anisotropic Turbulence Models for Wakes in an Active Ocean Environment
A set of second-moment closure turbulence models are implemented for the study of wake evolution in an oceanic environment. The effects of density stratification are considered, and the models are validated against laboratory experiments mimicking the stratified ocean environment, and against …
-
Compressible Corrections for Turbulence Models in High Speed Boundary Layer Flow
… because they have little to no reliance on turbulence models which may not accurately capture the physics driving the turbulent motion. The disadvantage of DNS and LES, especially in wall bounded, high Reynolds number flows, is the strict spatial and temporal resolution requirements that …
Page 1 of 33