Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 117 for “"Turbulence modelling"”.
-
Turbulence modelling in wind turbine wakes
… the wind turbine wakes increase the level of turbulence and cause a momentum defect that may lead to an increase of mechanical loads and to a reduction of power output. Thus, it is important for the wind energy industry to predict the characteristics of the turbulence field in the wakes with …
-
Turbulence Modelling with Deep Neural Networks
… to the time-averaged velocities. Traditional turbulence closure models are prone to inaccuracies, particularly for separated and transitional flows, due to the chaotic and anisotropic nature of turbulence. In this study, a data-driven approach is used to model turbulence leveraging …
-
Aerodynamic optimisation of wind farms using turbulence modelling
… and the impact of Reynolds Numbers and Turbulence Intensity on VAWT power outputs and wakes, and on simulation accuracy, is analysed.Analysis of array design demonstrated a potential 80% improvement in VAWT power output from using the Truss array design. The Four-equation turbulence …
-
Turbulence Modelling of Tidal Currents in Rectangular Harbours
In this study turbulence refinements have been made to existing computational models for the prediction of currents and water levels in coastal and estuarine waters via the numerical solution of the depth- and layer-integrated Reynolds equations. As most flows in practice are always turbulent, it …
-
First-Order Hyperbolic-Relaxation Turbulence Modelling for Moment-Closures
This dissertation presents a study of hyperbolic turbulence modelling for the Gaussian ten-moment equations. In gaskinetic theory, moment closures offer the possibility of deriving a series of gas-dynamic governing equations from the Boltzmann equation. One typical example, the Gaussian ten-moment …
-
Developments in turbulence modelling with Reynolds-averaged Navier-Stokes equations
The performance of different low-Reynolds number turbulence models applied to various flows is described. The emphasis is put on Chien's k – ε model, an explicit algebraic Reynolds-stress model by Speziale et al., and a full Reynolds-stress closure. The Reynolds-stress closure of this work has been …
-
Assessment of Turbulence Modelling for Compressibility Effects in Ejector Ramjet Applications
… (CFD) study is presented to assess the k−ω SST turbulence model’s accuracy in representing compressibility effects for a confined supersonic jet, a key component of the Atlantis Intake System ejector ramjet. The third-party OpenFOAM compressible flow solver, pimpleCentralFOAM, is used to …
-
Turbulence modelling of fast bimolecular reactions using one-dimensional equations of change
… A + B → R in statistically homogeneous Burgers turbulence. Two classes of initial conditions have been considered. For initially nonpremixed reactants, the evolution of single-point statistics have been computed from the DNS results at a turbulence Reynolds number Re = 400, at turbulent …
-
Shear-driven / gravity-driven thin liquid film in separated flow and turbulence modelling
"Gravity-driven and shear-driven thin liquid film flows are studied through numerical simulation and experimental measurements. The two types of film flows are often encountered in engineering applications, especially for the port-fuel-injection engine in a cold-start period. The better …
-
Hydrodynamics of the hydrocyclone flow field : effects of turbulence modelling, geometrical and design parameters
… performed to identify the relative importance of turbulence, convective, and pressure forces in these flows. We showed that convective and pressure forces in hydrocyclones are three orders of magnitude larger than the size of turbulent forces, and seven orders of magnitude greater than the viscous …
-
Simulations of the flow-driven rotation of the Francis-99 turbine runner. Evaluating the use of PANS and ILES turbulence modelling.
… is two-fold; firstly, the accuracy of a number of turbulence modelling methods are investigated at the best efficiency operating condition. The turbulence modelling approaches used are the k-ε RNG and k-ω SST URANS models, together with the k-ω SST PANS and ILES methods. Secondly, the implementation …
-
A qualitative assessment and optimization of URANS modelling for unsteady cavitating flows
… it continues to pose a challenge for numerical modelling techniques due to its flow unsteadiness and the cavitation-turbulence interaction. One of the principal aspects to modelling cavitation requires the coupling of a cavitation and a turbulence model. While, scale-resolving turbulence …
-
Tackling small-scale fluid features in large domain for computer graphics
… vortex methods show great promise from turbulence modelling, but face significant challenges in handling boundary conditions, making them less attractive for computer graphics applications. This thesis proposes several novel solutions for the efficient simulation of small scale vortex …
-
Large-eddy simulation of turbulent flows with heat transfer in simple and complex geometries
Some basic aspects of turbulence, transition to turbulence, and turbulence modelling, are summarized in Chapter 1 (Introduction). Emphasis is put on the increasing understanding of turbulent phenomena made possible by recent advances in the theory of dynamical systems; on the concept of "coherent …
-
Advanced computational modelling for aircraft landing gear unsteady aerodynamics
High-fidelity turbulence modelling techniques have been applied to simulate the flow field around a simplified landing gear bay geometry. Three-dimensional Detached Eddy Simulation (DES) simulations have been performed for a cavity with the front 2/3 covered, as is representative of a nose landing …
Page 1 of 6