Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"Two Phase Heat Transfer"”.
-
Two phase heat transfer in a sprial evaporative heat exchanger
Master of Science (M.S.)
-
TWO-PHASE HEAT TRANSFER MECHANISMS WITHIN PLATE HEAT EXCHANGERS: EXPERIMENTS AND MODELING
Two-phase flow heat exchangers have been shown to have very high efficiencies, but the lack of a dependable model and data precludes them from use in many cases. Herein a new method for the measurement of local convective heat transfer coefficients from the outside of a heat transferring wall has …
-
Solid to liquid and liquid to vapor two phase heat transfer enhancement approaches
Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2025-08-01
-
Enhancing Single and Two-Phase Heat Transfer of Microgap Heat Sinks Using Nano-Structure Coatings
… size and increasing power of electronics, the heat flux generated by electronic devices has greatly increased and imposed challenges to thermal management technologies. Numerous cooling technologies have been developed to cool high-power electronics. Among them, flow boiling in microchannels or …
-
Characterization and Modeling of Two-Phase Heat Transfer in Chip-Scale Non-Uniformly Heated Microgap Channels
A chip-scale, non-uniformly heated microgap channel, 100 micron to 500 micron in height with dielectric fluid HFE-7100 providing direct single- and two-phase liquid cooling for a thermal test chip with localized heat flux reaching 100 W/cm2, is experimentally characterized and numerically modeled. …
-
Experiments on two-phase heat transfer regimes in vertical downward flow: From nucleate to film boiling
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2025-03-28 without embargo terms
-
Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors
… and faster switching speeds, the volumetric heat generation rates and surface heat flux in many advanced power electronic devices have increased exponentially, creating an urgent need for efficient cooling technologies. It has become particularly challenging to maintain an optimal temperature …
-
Acoustic actuation of vapor-liquid interfaces in boiling and condensation processes
Two-phase heat transfer involving boiling and condensation in a liquid pool is widely used to accommodate high heat fluxes. However, coupling this attractive approach to system-level heat transfer is hampered by the rate-limiting steps of vaporization (inhibited by the critical heat flux limit on …
-
Flow boiling of R245fa in microgaps with staggered circular and hydrofoil pin fins
… and are a good candidate as working fluid in two-phase microsystem cooling applications. In this study, R245fa is investigated for flow boiling in microgaps with height of 200 μm, spacing in the ranges of 200-225 μm (dense device) and 400-450 μm (sparse device) are studied. For heat fluxes up …
-
FLOW BOILING OF ACETONE IN PARALLEL RECTANGULAR MINI-CHANNELS
… has demanded better designing tools for compact heat exchangers. Forced two-phase flow through small channels is an effective way to better performance in a limited space. However, the characteristics of flow boiling in small channels differ from those in regular size channels, prompting a need …
-
Flow boiling of water in pin-fin enhanced microgap
… system at reduced pressure with a wide range of heat fluxes, mass fluxes, and inlet fluid temperatures. Two microgaps with the same height of 200 μm, one with sparse pin fins, and the other with dense pin fins, were studied and compared. The transverse and longitudinal pitches were both 400 μm …
-
A computational scheme for calculating refrigerant properties & heat transfer in boiling tube flow
… (AuCFD) for calculating refrigerant properties, two-phase heat transfer coefficients and pressure drop of R12 and R134a in a horizontal tube. The scheme can help to understand the characteristics of refrigerant flow under different conditions and estimate the performance of direct expansion heat …
-
A computational code for the heating of gas-liquid mixtures in a horizontal tube
<p>A simple steady state heat transfer model and computer code have been developed for designing tubular heaters for two-phase (gas-liquid) multicomponent mixtures. Principle assumptions on which the model is based include: approach to local equilibrium between the phases, both the gas and liquid …
-
Extreme microgap based hotspot thermal management with convective boiling of refrigerant
… reaching its limits due to inability to remove heat, especially at high power density from so-called local “hotspots”. Convective boiling heat transfer in microgap heat sinks has the potential to dissipate ultra-high heat fluxes. This thesis presents an experimental investigation of heat …
-
Nucleate boiling heat transfer study of direct immersion cooling of a 3x3 array of vertically orientated electronic components in a dielectric fluid
Direct application of two-phase heat transfer in the liquid cooling of electronic components in fluorinated hydrocarbons (FC-72), is severely inhibited by the excessive amount of superheat required to initiate nucleate boiling. This phenomenon is well documented. To experimentally study the effects …
-
Enhancement of boiling heat transfer in di-electric fluids.
Direct application of two-phase heat transfer in the liquid cooling of electronic components in flouorinated hydrocarbons (FC-72), is severely inhibited by the excessive amount of superheat required to initiate nucleate boiling. To conduct an experimental study of nucleate pool boiling of FC-72, an …
-
Convection and Flow Boiling in Microgaps and Porous Foam Coolers
… material (TIM), is examined. The single phase heat transfer and pressure drop results of water are used to validate a detailed numerical model and, together with the convective FC-72 data, establish a baseline for microgap cooler performance. The two-phase heat transfer characteristics of …
-
Effects of Aluminum Foam on Boiling Heat Transfer for Thermosyphon Evaporator
… are found to be one of the better solutions for heat transfer enhancement; especially for two-phase heat transfer like pool boiling. This is due to their ability to provide a higher number of nucleation sites with a greater amount of surface area. Due to additional advantages like high thermal …
Page 1 of 4