Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Two phase cooling"”.

  1. Energy Efficient Two-Phase Cooling for Concentrated Photovoltaic Arrays

    … cooled by a thermal management system. Two phase, flow boiling is an attractive cooling option for such CPV arrays. In this work, two phase flow boiling in mini/microchannels and micro pin fin arrays will be explored as a possible CPV cooling technique. The most energy efficient …

    maryland Repository record for Energy Efficient Two-Phase Cooling for Concentrated Photovoltaic Arrays (opens in a new tab)

  2. A Thermally Driven Two-Phase Cooling Device for CPU Cooling

    … the present study developed a novel cooling solution with essential attributes of compactness, low-cost, high cooling capacity, low power consumption, and orientation-free design. To achieve these, the mechanism of phase change was utilized. Fundamental boiling experiments were …

    nus Repository record for A Thermally Driven Two-Phase Cooling Device for CPU Cooling (opens in a new tab) Download file for A Thermally Driven Two-Phase Cooling Device for CPU Cooling (opens in a new tab)

  3. A Two-Phase Cooling Method Using R134a Refrigerant to Cool Power Electronics Devices

    … energy produced must be removed. Present HEV cooling methods provide adequate cooling effects, but lack sufficient junction temperature control to maintain long-term reliability. This thesis is based on using the automobile’s air conditioning system as an alternative to conventional power …

    ut-knoxville Repository record for A Two-Phase Cooling Method Using R134a Refrigerant to Cool Power Electronics Devices (opens in a new tab)

  4. Transport Characteristics of Pin Fin Enhanced Microgaps under Single and Two Phase Cooling

    Microfluidic convection cooling is a promising technique for future high power microprocessors, radio-frequency (RF) transceivers, solid-state lasers, and light emitting diodes (LED). Three-dimensional (3D) stacking of chips is a configuration that allows many performance benefits. A microgap with …

    gatech Repository record for Transport Characteristics of Pin Fin Enhanced Microgaps under Single and Two Phase Cooling (opens in a new tab)

  5. Design and analysis of a compact two phase cooling system for a laptop computer

    … enclosures. The majority of current cooling systems in laptop computers rely on heat pipes attached to a remote heat exchanger with micro-fans providing forced convection to reject heat to the ambient, however this technique can not accommodate the increasing heat fluxes in the …

    gatech Repository record for Design and analysis of a compact two phase cooling system for a laptop computer (opens in a new tab)

  6. Enhanced two-phase cooling using bi-particle-size sintered particle evaporator with distributed liquid supply capillary wicks

    Liquid-vapor, phase-change heat transfer using wicks can provide reliable and high heat flux cooling capability, especially in microgravity applications. However, the maximum heat removal capacity, also known as Critical Heat Flux (CHF), is related to the capillary-driven liquid supply limit and/or …

    wichita-thes Repository record for Enhanced two-phase cooling using bi-particle-size sintered particle evaporator with distributed liquid supply capillary wicks (opens in a new tab)

  7. EMBEDDED TWO-PHASE COOLING OF HIGH FLUX ELECTRONICS VIA MICRO-ENABLED SURFACES AND FLUID DELIVERY SYSTEM (FEEDS)

    … the various physical phenomena affecting two-phase flow in manifold-microchannels, including nucleate boiling, flow regime, annular film evaporation, void fraction, single-phase fully developed and developing forced convection, intra-microchannel flow distribution, and fin conduction. The …

    maryland Repository record for EMBEDDED TWO-PHASE COOLING OF HIGH FLUX ELECTRONICS VIA MICRO-ENABLED SURFACES AND FLUID DELIVERY SYSTEM (FEEDS) (opens in a new tab)

  8. INTEGRATED THERMAL MANAGEMENT OF HIGH-POWER ELECTRONICS: FROM DIE-LEVEL DESIGNS TO COMPONENT-LEVEL TWO-PHASE COOLING.

    … power densities push the limits of conventional cooling technologies. Rapid advances in electronic technologies, including artificial intelligence (AI)-driven computing workloads, high-performance computing (HPC) platforms, wireless and radio-frequency (RF) communication systems, power …

    maryland Repository record for INTEGRATED THERMAL MANAGEMENT OF HIGH-POWER ELECTRONICS: FROM DIE-LEVEL DESIGNS TO COMPONENT-LEVEL TWO-PHASE COOLING. (opens in a new tab)

  9. Construction and Experimental Analysis of Pump-Assisted and Capillary-Driven Single- and Dual- Evaporators Two-Phase Cooling Loops

    … higher power densities, the demand for efficient cooling methods increases. Due to high heat flux capability, two-phase cooling systems may be applied to cool a wide variety of newly emergent technologies such as power electronics seen in electric-drive vehicles. This paper presents the …

    unr Repository record for Construction and Experimental Analysis of Pump-Assisted and Capillary-Driven Single- and Dual- Evaporators Two-Phase Cooling Loops (opens in a new tab)

  10. High-Performance Wide Bandgap Semiconductor Power Modules Enabled by Advanced Two-Phase Mini-Channel Cooling

    … bandgap power module technology, conventional cooling solutions have not kept up and do not provide the thermal management performance needed for high power density. Based on the two-phase cooling approach, two-phase microchannels operating at low fluid flow rates with low pressure drops have …

    south-carolina Repository record for High-Performance Wide Bandgap Semiconductor Power Modules Enabled by Advanced Two-Phase Mini-Channel Cooling (opens in a new tab)

  11. Modeling and Control Architecture Design of Multi-evaporator Pumped Two-phase System

    Two-phase cooling systems are being explored actively as a promising technology for energy-intensive electronics systems. The latent heat of vaporization results in a high heat-transfer coefficient. However, the system may suffer a sudden increase in temperature when the heat flux exceeds the …

    tamu Repository record for Modeling and Control Architecture Design of Multi-evaporator Pumped Two-phase System (opens in a new tab)

  12. Novel substrates for improved cooling of power electronics

    … concepts which allow the placement of advanced cooling solutions close to power electronic die are investigated through the creation of advanced substrate technologies. First, two phase cooling was integrated with direct bonded copper power substrates by sintering copper particles directly onto …

    gatech Repository record for Novel substrates for improved cooling of power electronics (opens in a new tab)

  13. Transient experimentation and modeling of a multi-microchannel evaporator

    … in performance or damage to the device. Two-phase cooling in microchannels has shown great promise in steady-state studies, dissipating heat fluxes over 1.1 kW cm-2. The very high latent heat and buoyancy-driven effects associated with two-phase cooling produce large heat transfer …

    colostate Repository record for Transient experimentation and modeling of a multi-microchannel evaporator (opens in a new tab)

  14. Effect of electrohydrodynamics on thermal dissipation for high voltage thermosyphons

    Thermosyphon is a two-phase cooling approach that utilises coolant phase change to dissipate thermal energy. Selecting a suitable coolant is important to the thermosyphon design. In recent years, there has been considerable interest in selecting low global warming potential coolants to replace …

    soton Download PDF for Effect of electrohydrodynamics on thermal dissipation for high voltage thermosyphons (opens in a new tab)

  15. Structural Reliability of Novel 3-D Integrated Thermal Packaging for Power Electronics

    … management include the development of embedded two-phase cooling systems. However, the reliability of such devices and that of their integration into the power electronics package have yet to be studied. This thesis details a Physics of Failure (PoF) based structural reliability analysis of …

    maryland Repository record for Structural Reliability of Novel 3-D Integrated Thermal Packaging for Power Electronics (opens in a new tab)

  16. 3D and 2.5D heterogeneous integration platforms with interconnect stitching and microfluidic cooling

    Signal integrity and thermal management are the two major challenges in heterogeneous integration technologies. In this research, the impact of through silicon vias (TSVs) on electrical performance of 3D/2.5D ICs was experimentally investigated. It was found the delay of the 3D IC link can be …

    gatech Repository record for 3D and 2.5D heterogeneous integration platforms with interconnect stitching and microfluidic cooling (opens in a new tab)

  17. Modeling and optimization of emerging on-chip cooling technologies via machine learning

    … delays and leakage power. Conventional on-chip cooling solutions are often insufficient to efficiently mitigate such high-power-density hot spots. Emerging cooling technologies such as liquid cooling via microchannels, thermoelectric coolers (TECs), two-phase vapor chambers (VCs), and hybrid …

    bu Repository record for Modeling and optimization of emerging on-chip cooling technologies via machine learning (opens in a new tab)

  18. Feasibility of Heat Pipes for High Performance Components in Airborne Applications: Thermal Integration Challenges and Design Strategies

    This thesis focused on evaluating passive two-phase heat transfer technologies for potential use in airborne applications. The work included a background study of different heat pipe technologies, wick structures, working fluids and materials to identify suitable concepts for airborne conditions. …

    chalmers Repository record for Feasibility of Heat Pipes for High Performance Components in Airborne Applications: Thermal Integration Challenges and Design Strategies (opens in a new tab)

  19. A Modification to the Skiving Process for the Manufacture of Offset Geometry Strip-Fin Heat Sinks

    … of heat sinks as either an active or passive cooling device. Although two-phase cooling technology has rapidly advanced to accommodate increasing heat loads on modern electronics, the added costs and complication inherent in two-phase cooling solutions makes effective air-cooled heat sinks …

    wustl Repository record for A Modification to the Skiving Process for the Manufacture of Offset Geometry Strip-Fin Heat Sinks (opens in a new tab)

Page 1 of 3