Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Two-Part Epoxy"”.
-
Cure Kinetics of Two Part Epoxy Resin and the Effect on Characterization of Thermal Barrier Coatings
… polishing. The curing kinetics of a slow cure two part epoxy was investigated and the TBC samples were mounted and cured at heating rates of 2, 5, and 10°C/min to 55°C and 70°C. Grinding and polishing procedures simulated industry practices followed by characterization with optical microscopy. …
-
Creep Behaviour of Post-Installed Adhesive Anchors under Various Sustained Load Levels and Environmental Exposures
… for anchor installation: Type-A a fast setting two component methyl methacrylate adhesive, Type-B a fast setting two part epoxy adhesive, and Type-C a standard set two part epoxy adhesive. The study is divided into four phases. Phase I consists of 27 static pullout tests to determine the yield …
-
Investigation of strength of a hybrid adhesive anchor system used in precast concrete welded repair applications subjected to tensile and eccentric shear loading
… bond strength testing data using a high strength two-part epoxy adhesive is also included. The overall aim of this work is to provide test data and guidance to the industry and design professionals when designing adhesive anchoring systems for repair applications exposed to welding.
-
Low cost aluminium closures
… for low cost aluminium closures and an optimised two part epoxy has been evaluated and would be recommended for use on large closures where increased handling strength is required. Manufacturing feasibility has been investigated and low cost aluminium closures can be manufactured in Ford of Europe …
-
Effects of Surface Condition on the Fatigue Behavior of CFRP-to-Steel Joints
… joints (DSJ) were fabricated consisting of two high-modulus CFRP laminates and ASTM A36 steel plates bonded using a two-part epoxy adhesive. Two types of steel surface conditions were considered to evaluate the fatigue behavior under constant force amplitudes. Roughness on the steel …
-
Characterization of Structural Adhesives Using Lap Shear and Pin and Collar Tests
… of the surfaces of the bonded materials. Two different toughened epoxy structural adhesives were investigated in this study, a two part epoxy (DP460NS) and a one-part epoxy (SA9850). Experimental lap shear tests were undertaken to identify optimum strength combinations between adhesives …
-
A Transparent Polymer With Electrically Conductive Particles For Solar Devices
… transparent polymer with electrically conductive particles (TPCP) is presented for use with solar devices in three configurations: fully bonded, semi-bonded, and freestanding. Transparency and adhesion are achieved with a clear two-part epoxy. Silver-coated poly (methyl methacrylate) microspheres …
-
Fabrication and characterization of cellulose nanocrystal enhanced sustainable polymer nanocomposites through surface chemistry and processing
… compatibility and overall performance of CNC/epoxy and CNC/polyamide nanocomposite. For a two-part epoxy system, a novel approach was taken to disperse CNC in epoxy matrix by pre-formulating CNC into the hardeners. Three types of hardeners were evaluated for their compatibility with CNC. With …
-
Aluminum Isopropoxide: A Versatile Crosslinker for the Development of Organic - Inorganic Epoxy Hybrid Materials
… properties that is greater than the sum of each part. Epoxy resins are known for having high chemical and corrosion resistance, high impact resistance, toughness, and outstanding adhesion. They are widely used as adhesives, high-performance composite matrices for aerospace and sporting goods, and …
-
Three Dimensional Engineered Structures from Graphene Oxide Atomic Layers
Two dimensional (2D) atomic layered materials have recently gained much attention due to their novel physical properties. However, to be utilized for direct applications, there is a need to build three dimensional (3D) structures from them that can retain the intrinsic properties of the material …
-
Self-healing materials and multinozzle printheads with embedded microvascular networks
Microvascular networks are pervasive in biological systems, assisting in the repair of tissue damage, regulation of temperature, and efficient distribution of nutrients. Emulating these functional attributes in engineering contexts such as self-healing materials, microfluidic temperature …
-
Bioinspired microvascular self-healing in polymers and composites
… in heterogeneous polymeric materials, particularly fiber-reinforced polymer composites, to recover fracture resistance over consecutive damage-heal cycles. A serendipitous outcome of the research is the ability to provide multi-functional properties such as active cooling, magnetic …