Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"Two-Photon Lithography"”.
-
Subsurface two-photon lithography: improvements and applications
Two-photon lithography has previously been used to fabricate a variety of three-dimensional structures where the material is uniform throughout. When performing subsurface controllable refractive index via beam exposure (SCRIBE), two-photon lithography is implemented with a porous material as the …
-
Replication and Tribological Engineering of Physical Surfaces Using Two-Photon Lithography
… laser scanning microscopy and fabricated through two-photon lithography to serve as masters for replication. In this way, natural surfaces may be replicated many times without the need for using existing direct replication methods, many of which are potentially destructive and limited in the …
-
Computational Modeling of Projection Two-Photon Lithography and Evaluation of Process Limits
Two-photon lithography (TPL) is a direct laser writing technique that is capable of printing cm-scale three-dimensional structures with submicron-scale features. Projection two-photon lithography (P-TPL) is a variant of TPL that is a thousand times faster than conventional point-by-point processing …
-
Optical Metasurfaces
… most common options are electron-beam and photo-lithography. Despite its common availability, electron-beam lithography is costly and slow in general. Additionally, the longitudinal degree of freedom on the unit cell geometry is not accessible, which causes high-index material requirements to …
-
High-Aspect-Ratio Three-Dimensional Polymer and Metallic Microstructures using Two-Photon Polymerization
… is not feasibly compatible with conventional 2D lithography workflow. Here, we present a fabrication process using two-photon-lithography (2PP) printing with electroless plating as an alternate method of fabricating conductive 3D MEMS structures. In this process, the effect of 2PP processing …
-
3D reconstruction of porous structure and permeability simulation
… used to reconstruct 3D porous structure, then two nanoscribe technologies, two-photon lithography and large area projection micro-stereolithography were adopted to rebuild the porous structure. Some fluid tests were simulated and permeability of the rock sample were calculated based on Darcy's …
-
Measurement of optical refractive index for 3d microcomponents /
The two-photon lithography (TPL) technique has been widely used for the fabrication ofmicroelements for optical applications where the understanding of the refractive index (RI) ofthe material is fundamental. Different techniques allows the measurements of the RI of thematerial but they limit the …
-
Unconventional Processing And Characterization Methods In Lithography
As lithography moves toward feature sizes of 22 nm and smaller and pushing for applications beyond the semiconductor industry, unconventional processing and characterization methods are in demand for patterning of unusual structures, new processing techniques, and better understanding and control …
-
Solid state electrochemical processes for nanofabrication
… of the art direct writing techniques (e.g. Ebeam lithography and Focus ion beam lithography). First, a solid state electrochemical direct writing technique is developed using a conductive atomic force microscopy (AFM) tip for rapid prototyping of silver nanostructures on a silver based ion …
-
Flat optics based on patterned nanostructures for concentrating light
… nanostructured surfaces that are fabricated by two-photon lithography. In the former case, we developed pillar-supported Au bowtie nanoantennas (pBNAs), and found that light concentration in these structures leads to both a large field enhancement and thermal response. We found that intrinsic …
-
A MEMS dynamic mechanical analyzer for in situ viscoelastic characterization of 3D printed nanostructures
… (DMA) that can be directly integrated with the two-photon lithography (TPL) process commonly used to fabricate metamaterial structures with nanoscale features. The MEMS-based DMA consists of a chevron style thermal actuator used to generate a tensile load on the structure and two differential …
-
THZ OPTICS AND METAMATERIALS: DESIGN, FABRICATION AND CHARACTERIZATION
… The thesis involved the development of two lab facilities for fabrication and characterization. A state-of-the-art two photon lithography(TPL) system was developed which enables us to manufacture 3D structures with sub-diffraction limit resolution(280nm for 800nm wavelength). The …
-
Spatiotemporally Resolved Proteomics and Biomaterial Customization via Image-guided Photochemistry
… image-guided patterning workflows utilizing two-photon lithography. After spatial labeling, 4D-tagged proteins are enriched through affinity purification and subjected to shotgun proteomics via liquid chromatography with tandem mass spectrometry (LC/MS-MS). These methods were successfully …
-
Scalable direct electrochemical nanopatterning of silver films
… NMR and Raman. Finally, combining with the two-photon lithography and the P2R implemented S4 process, a structural color patterning is also demonstrated.
-
Small-scale Fracture and Size Effects in Bioinspired Nanoarchitected Materials
… nanoarchitected materials via a combination of two-photon lithography, plasma etching, and in-situ nanomechanical testing. We first study how fracture behavior changes with sample size in polymers with varying degrees of crosslinking (DC) and find that ductility emerges when the sample width …
-
Compact electro/optical packaging enabled by photonics wire bonding
Three-dimensional freeform optical waveguides, or photonic wired bonding (PWB), is a versatile technology that enables low-loss interconnects between photonics components. With two-photon lithography, PWB can match the mode profile and position mismatch between single-mode fibers, photonics …
-
3D gradientinių fotoninių darinių gamyba lazerinės litografijos būdu ir jų apibūdinimas /
Two-Photon Lithography technique (TPL) has attracted a lot of attention given the ability to fabricate complex 3D micro- and nano-structures with high-precision and sub-diffraction limit resolution. This trait makes it be a favourable technique to fabricate complex 3D photonic crystals (PhC), which …
-
Defect and Strain Engineering of Structure–Property Relationships in Two-Dimensional Materials
Two-dimensional (2D) materials offer a wide range of mechanical, electronic, and optical properties at atomic thicknesses, making them promising candidates for next-generation logic, sensing, and flexible electronic technologies. However, their practical use faces challenges: van der Waals surfaces …
-
Optical Systems and Materials for Solar Concentrators, Radar Emulation, and Computer Holography
Much of optics and photonics is concerned with the management of light, more specifically, the management or modification of an incident light field. This could include redirecting or shaping the light or managing how light scatters off an object. This dissertation looks at light management and …
Page 1 of 2