Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Two-phase heat transfer coefficient"”.
-
FLOW BOILING OF ACETONE IN PARALLEL RECTANGULAR MINI-CHANNELS
… has demanded better designing tools for compact heat exchangers. Forced two-phase flow through small channels is an effective way to better performance in a limited space. However, the characteristics of flow boiling in small channels differ from those in regular size channels, prompting a need …
-
A computational code for the heating of gas-liquid mixtures in a horizontal tube
<p>A simple steady state heat transfer model and computer code have been developed for designing tubular heaters for two-phase (gas-liquid) multicomponent mixtures. Principle assumptions on which the model is based include: approach to local equilibrium between the phases, both the gas and liquid …
-
Flow boiling of water in pin-fin enhanced microgap
… system at reduced pressure with a wide range of heat fluxes, mass fluxes, and inlet fluid temperatures. Two microgaps with the same height of 200 μm, one with sparse pin fins, and the other with dense pin fins, were studied and compared. The transverse and longitudinal pitches were both 400 μm …
-
Heat transfer in upward flowing two-phase gas-liquid mixtures. An experimental study of heat transfer in two-phase gas-liquid mixtures flowing upwards in a vertical tube with liquid phase being driven by a pump or air injection.
… investigation has been carried out to study the heat transfer in a two-phase two-component mixture flowing upward inside a 1" double pipe heat exchanger. The heat transfer coefficient was measured using either air to lift the liquid (air-lift system) or a mechanical pump. The heat transfer …
-
Flow boiling of R245fa in microgaps with staggered circular and hydrofoil pin fins
… and are a good candidate as working fluid in two-phase microsystem cooling applications. In this study, R245fa is investigated for flow boiling in microgaps with height of 200 μm, spacing in the ranges of 200-225 μm (dense device) and 400-450 μm (sparse device) are studied. For heat fluxes up …
-
Extreme microgap based hotspot thermal management with convective boiling of refrigerant
… reaching its limits due to inability to remove heat, especially at high power density from so-called local “hotspots”. Convective boiling heat transfer in microgap heat sinks has the potential to dissipate ultra-high heat fluxes. This thesis presents an experimental investigation of heat …
-
Convective boiling of refrigerants near the micro-macroscale transition inside plate heat exchangers
… flow morphology and its impact on evaporative heat transfer and pressure drop during plate heat exchanger (PHE) operation at low mass flux conditions. While there is interest in this operating regime in the heating, ventilating, air conditioning, and refrigeration industries, especially for …
-
Heat transfer enhancement in two-phase microchannel heat exchangers for high heat flux electronics
… each bar. State of the art diode arrays can have heat fluxes exceeding 1 kW cm-2. Effective thermal management strategies are key because the diode's output wavelength, bandwidth, efficiency and lifetime are temperature dependent. Commercially available high powered laser diode arrays are …
-
Experimental Investigation and Analytical Modeling of Flow Boiling Characteristics in Silicon Microchannel Arrays
… years, research in the field of flow boiling heat transfer at a microscale level has been constantly increasing due to rapid growth of technology applications that require the transfer of heat at high rates in a relatively small space and volume. The present study focuses on the experimental …
-
Flow Boiling of a Dilute Emulsion on a Microporous Surface
… For water on the smooth surfaces, the single-phase heat transfer coefficient increases with increasing mass flux and decreasing gap size. After the onset of nucleate boiling and prior to transition to the critical heat flux, the heat transfer curves collapse to one curve. CHF increases with …
-
Výrobník ledu s přímým odparem
Teoretická část diplomové práce se zabývá uvedením do problematiky chladicích systémů s možností akumulace chladu. Jsou představeny možnosti akumulace chladu se změnou skupenství. Je vysvětlen termodynamický princip fungování konkrétního typu chladicího systému, jeho výkonnostní ukazatel a základní …
-
Semi-analytical Modeling Approach for Flow Boiling Heat Transfer in Uniformly Heated Horizontal Micro-Channels
Two-phase flow boiling in mini/micro-channels is an essential topic for studying and developing miniature cooling systems which have a wide range of industrial, automotive, nuclear, and aerospace applications, since they insure providing higher heat dissipation and ability to work at surface …