Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Two-phase pressure drop"”.

  1. Two-Phase Pressure Drop and Flow Regime of Refrigerants and Refrigerant -Oil Mixtures in Small Channels

    … walls of the tubes), but also increases the pressure drop (as the diameter decreases, it becomes like drinking a milkshake through a coffee stirrer). The inclusion of even small amounts of oil in circulation can have a significant effect as well. Historical correlations and studies of …

    uiuc Repository record for Two-Phase Pressure Drop and Flow Regime of Refrigerants and Refrigerant -Oil Mixtures in Small Channels (opens in a new tab)

  2. Two-phase pressure drop and phase distribution at a reduced horizontal tee junction, the effect of system pressure

    The present investigation generated phase-distribution and pressure-drop data for air-water flows in a reduced horizontal tee junction. This junction consisted of a 38.1-mm I.D. inlet tube with a 7.85-mm I.D. branch tube, thus yielding a diameter ratio of $\rm D\sb3/D\sb1=0.206.$ The operating …

    manitoba Repository record for Two-phase pressure drop and phase distribution at a reduced horizontal tee junction, the effect of system pressure (opens in a new tab)

  3. Experimental study of water transport mechanisms and two-phase pressure drop in a simulated polymer electrolyte membrane fuel cell cathode gas channel

    … high speed videos are used to measure departure droplet diameter, advancing and receding contact angles, and to report general flow patterns that are observed. Results show a general agreement between GDM Samples A and B with respect to departure droplet behavior, contact angle data, and general …

    rit Repository record for Experimental study of water transport mechanisms and two-phase pressure drop in a simulated polymer electrolyte membrane fuel cell cathode gas channel (opens in a new tab)

  4. Experimental Investigation of Binary Mixture Flow Boiling in Micro-Channels

    … for a fixed vapor quality. Testing also showed two-phase pressure drop across the micro-channels increased appreciably once flow boiling occurred in micro-channels. Correlations used to predict the heat transfer coefficient and two-phase pressure drop in pure fluids were applied to the …

    hawaii Repository record for Experimental Investigation of Binary Mixture Flow Boiling in Micro-Channels (opens in a new tab)

  5. Atomization and Deposition in Two-Phase Annular Flow: Measurement and Modeling (Pressure Drop, Thin Films, Turbulent Dispersion)

    … from the wall layer in vertical annular two-phase flow and of deposition of this liquid back to the liquid film. These models have been incorporated into a design scheme for the prediction of two-phase pressure drop and fully developed entrained liquid fraction for the annular regime.

    uiuc Repository record for Atomization and Deposition in Two-Phase Annular Flow: Measurement and Modeling (Pressure Drop, Thin Films, Turbulent Dispersion) (opens in a new tab)

  6. Coalescence of secondary dispersions in packed beds

    … bed depth, ballotini size and dispersed phase concentration. Equipment was designed to generate a toluene ln water dispersion with phase ratios from 0.1 - 1.0 v/v % and whose mean drop size was determined using a Coulter Counter. The coalesced drops were sized by photography and the mean …

    aston Download PDF for Coalescence of secondary dispersions in packed beds (opens in a new tab)

  7. Use of Lagrangian methods to describe particle deposition and distribution in dispersed flows

    … in air-water annular flow. An estimate of the droplet slip ratios has been obtained. This provides an improved correlation of measured deposition rates with droplet concentration. In addition droplet slip ratios are useful for correctly estimating the role of the droplets on the two phase …

    uiuc Repository record for Use of Lagrangian methods to describe particle deposition and distribution in dispersed flows (opens in a new tab)

  8. Experimental Investigation and Analytical Modeling of Flow Boiling Characteristics in Silicon Microchannel Arrays

    … in silicon microchannel heat sinks. Two different designs of microchannel heat sinks were considered, namely, straight and cross-linked. The straight microchannel heat sink was composed of 45 parallel microchannels etched in a silicon wafer, for which each channel had a depth of 300 …

    concordia Download PDF for Experimental Investigation and Analytical Modeling of Flow Boiling Characteristics in Silicon Microchannel Arrays (opens in a new tab)

  9. An experimental study of pressure drop characteristics in vertical upward two phase and three phase flows

    The flow of multiphase mixture is encountered in numerous industrial, energy transfer process and especially in oil and gas transportation sector. Transportation of multiphase oil and gas mixture form wellbore to onshore production facility has many issues associated with it. One of the main issues …

    nus Repository record for An experimental study of pressure drop characteristics in vertical upward two phase and three phase flows (opens in a new tab) Download file for An experimental study of pressure drop characteristics in vertical upward two phase and three phase flows (opens in a new tab)

  10. Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux.

    … conducted to evaluate three currently popular two-phase pressure drop models for extremely low velocity refrigerant flow through smooth circular evaporators in household refrigeration systems. Experimental data was taken at mass fluxes under 70 kg/m2s for two refrigerants, R134A and R600A, …

    louisville Repository record for Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux. (opens in a new tab)

  11. Mechanisms of secondary dispersions separation in particulate beds

    The mechanisms by which drops of secondary liquid dispersion ie. <100μ m, are collected, coalesced and transferred have been studied in particulate beds of different sizes and heights of glass ballotini. The apparatus facilitated different coalescer cell arrangements. The liquid-liquid system was …

    aston Download PDF for Mechanisms of secondary dispersions separation in particulate beds (opens in a new tab)

  12. AN EXPERIMENTAL STUDY ON THE LOCAL VOID FRACTION MEASUREMENTS IN LARGE-DIAMETER VERTICAL PIPES USING OPTICAL FIBER PROBES

    … performing of experiments, was designed as a low-pressure air-water loop, which can operate in either a natural circulation mode or a forced circulation mode. Radial void fraction profiles were measured using an optical fiber probe. An average cross-sectional void fraction was calculated by …

    mcmaster Repository record for AN EXPERIMENTAL STUDY ON THE LOCAL VOID FRACTION MEASUREMENTS IN LARGE-DIAMETER VERTICAL PIPES USING OPTICAL FIBER PROBES (opens in a new tab)

  13. Inverse uncertainty quantification of trace physical model parameters using Bayesian analysis

    … with measured data available for single or two-phase pressure drop, axial and radial void fraction distributions, and critical power for a wide range of system conditions. In this thesis, the steady-state cross-sectional averaged void fraction distribution from BFBT experiments is used as …

    uiuc Repository record for Inverse uncertainty quantification of trace physical model parameters using Bayesian analysis (opens in a new tab)

  14. Air-cooled condensers for thermoelectric power generation

    … of a representative 500 MW thermoelectric plant. Two-phase pressure drop, condensation, and fin performance correlations were implemented into the code to predict condenser performance using conservation of energy and momentum equations. Investigations include a parametric study on plain, wavy, …

    gatech Repository record for Air-cooled condensers for thermoelectric power generation (opens in a new tab)

  15. Pressure drop and heat transfer characteristics of Refrigerant-114 boiling in a horizontal tube

    <p>Research was undertaken to study the two-phase pressure drop and heat transfer characteristics of R-114 flowing in a horizontal tube. Flow regime studies were also performed as a part of this effort. Boiling temperature was varied from 100 to 250&deg;F and mass flux was varied from 0.12 to 3.4 x …

    ut-knoxville Repository record for Pressure drop and heat transfer characteristics of Refrigerant-114 boiling in a horizontal tube (opens in a new tab)

Page 1 of 2