Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 279 for “"Tyre"”.
-
Sensing the tyre-road contact by intelligent tyre
… effort has been made in the development of tyres and vehicles to optimize the safety, performance and economy in transportation. Throughout the vehicle development processes, the tyre is considered as a key component for the vehicle behaviour. However, the tyre-road contact is not being …
-
Deformations of the pneumatic tyre
… model is developed for the general pneumatic tyre. The model will permit the investigations of tyre deformations produced by arbitrary external loading, and will enable estimates to be made of the distributions of applied and reactive forces. The principle of Finite Elements is used to …
-
Tyre modelling for rolling resistance
… important source for losses in road vehicles is tyre rolling resistance. For tyres with rolling resistance coefficient of 0.012, the fuel consumption due to tyre rolling resistance losses can amount to 20% - 30% of total consumption depending on the drive cycle, according to the study ‘the tyre: …
-
Finite element analysis and experimental investigation of tyre characteristics for developing strain-based intelligent tyre system
… investigation into the relationships between the tyre strain feature and tyre operating conditions based on finite element analysis and experiments for the development of a strain-based intelligent tyre system, which could estimate the tyre operating characteristics for optimising vehicle dynamics …
-
Tyre Library for Vehicle Energy Model
… motivates research towards energy loss due to tyre components. Performing tyre tests to determine the nature of these losses for every scenario may turn out to be expensive. Magic tyre formula is widely accepted to give comparable results to real world but the model is not motivated with …
-
Liquefaction of sand-tyre chip mixtures.
… reclaimed land and a growing number of discarded tyres by mixing liquefiable sand with tyre chips and using them as fill materials with the aim reducing the liquefaction potential. The cyclic strength of sand-tyre chip mixtures was investigated using a cyclic triaxial system which was modified to …
-
Numerical modelling of tyre-derived geo-composites
This thesis aims to study the property of rubber–sand mixtures as a geotechnical alternative. Previous studies have shown superior properties of this artificial composite such as high resiliency, light weight, and improved skin-resistance. Also, when mixed with conventional geotechnical materials, …
-
Noise generated at the tyre/road interface
… this thesis is directed towards the reduction of tyre/road interface noise and embodies a study of the factors involved in its generation. These factors comprise: (a) materials and construction of tyres and road surfaces (b) the spectral distribution of the noise. The importance of this work has …
-
Lateral tyre forces on off-road surfaces
A successful model for off-road tyres must be reliable, efficient and capable of reproducing and predicting the main system phenomena. Mathematical models are proposed for longitudinal, lateral and combined lateral and longitudinal force generation characteristics of off-road tyres. For a better …
-
Energy changes on deformation of a pneumatic tyre
… load-deflection characteristics of a pneumatic tyre and its associated changes in the pressure and volume of the air contained in it. A satisfactory results were obtained from this arrangement. From the measurements of the changes in volume and pressure of the air in the tyre, relationship was …
Page 1 of 14