Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"UCl3"”.
-
Thermodynamic Assessment of Chromium Corrosion In The Na-K-Mg-U(III, IV) Chloride Salt
… unreported intermediate compound in the NaCl-UCl3system. Throughout the thermodynamic assessments, the heat of mixing (&Delta mixH) for some of the needed systems were found to be unavailable. Thus, an improvement upon the Davis’ &Delta mixH estimation method was developed to allow &Delta mixH …
-
Electrochemical Studies of Cerium and Uranium in LiCl-KCl Eutectic for Fundamentals of Pyroprocessing Technology
… the main properties (e.g., D, E0*, etc.) of UCl3 in LiCl-KCl eutectic salt under different concentrations (0.5 wt% to 4 wt% UCl3) and temperatures (723 K to 798 K). Specially, the i0 values of U3+/U were evaluated via EIS, LP, Tafel, and CV methods. All i0 values had linear trends with the …
-
Experimental and Computational Investigations of Candidate Fuel Salt Melt Properties and Corrosion and Irradiation Damage in Nickel for a Molten Chloride Fission System
… structure. The phase diagrams for the NaCl-UCl3 and NaCl-UCl3-CeCl3 systems are investigated, in which Ce was used as a surrogate for Pu. Accurate measurements of the solidus and liquidus phase boundaries of each system are made using differential scanning calorimetry. Significant …
-
Compatability Assessment of HfN, ZrN, and Graphite with Molten LiCl-NaCl-KCl-UCl₃
… a quaternary salt of composition LiCl-KCl-NaCl-UCl3 were assessed. Coupons of each of the three refractory materials were exposed to the quaternary salt at 525 to 900°C for 4 to 485 hours. The oxygen partial pressure was maintained at 10-8 atm of O2 in most experiments. A limited number of …
-
Electrochemical Sensors and Processes in Molten Salts: Chlorine Production, Electroanalytical Chemistry, and Thin-Layer Electrodes
… and demonstrated in solutions containing UCl3 and PuCl3. In addition, several smaller studies that advance the development of molten salt technologies are shared, including investigations into the proper preparation of W electrodes and Al2O3 crucibles, and testing of a rapid method for …
-
Development of Near-Real Time Material Detection and Analysis by Coupling Electrochemical & Optical Spectroscopy Methods for Molten Salt Systems
… CV and LIBS through sensor fusion to monitor UCl3, GdCl3, and MgCl2 simultaneously in a LiCl-KCl salt system.
-
MEASUREMENT OF RARE EARTH AND URANIUM ELEMENTS USING LASER-INDUCED BREAKDOWN SPECTROSCOPY (LIBS) IN AN AEROSOL SYSTEM FOR NUCLEAR SAFEGUARDS APPLICATIONS
… within the ER. 3. Aerosol-LIBS testing using UCl3: Samples containing UCl3 with concentrations ranging from 0.3 wt% to 5 wt% were measured. The spectral response in this range was linear. The best univariate calibration curves were generated using the peak areas of the U 367.01 nm line and had …
-
Actinide and Alkali Metal Complexes of Rigid Monoanionic Chalcogenoether-Donor Ligands
… uranium(IV) trichloro complex [(ASe2Tripp2)UCl3(THF)] (26), featuring a single ASe2Tripp2 ligand was prepared by the reaction of [K(ASe2Tripp2)(dme)2] with one equiv. of UCl4 in THF. Two different crystal structures of 26 (26·o-DFB and 26·0.4 THF) gave structures with U–Se distances that …