Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"UDMA"”.
-
Characterization of Aligned Carbon Nanotube/Polymer Composites
… in a polyimide matrix and a polymer blend of UDMA/HDDMA. In-situ polymerization under sonication is used to disperse the SWNTs in polyimide matrix and sonication is used to disperse SWNTs in the UDMA/HDDMA matrix. In both cases, an electric field is used to align the SWNTs in the polymer …
-
Διάχυση μονομερών συνθετικών υλικών μέσω οδοντίνης σε συνθήκες εξομοίωσης πολφικής πίεσης
… A), TEGDMA (Triethylene glycol dimethacrylate), UDMA (Urethane dimethacrylate) and BisGMA (Bisphenol A glycerolate dimethacrylate), in the pulp chamber of human teeth, through the remaining dentin.Materials and Methods: For the determination of the compounds HEMA, ΒΡΑ, TEGDMA, UDMA and BisGMA two …
-
Reinforcement Learning-Enabled Resource Allocation for Distributed and Uncoordinated Cognitive Radio Networks
… and Distributed Multi-agent Deep Q-Learning (UDMA-DQL), a DQL technique that combines learning in exploration phases, and the use of a Best Reply Process with Inertia. Furthermore, in the study of UDMA-DQL herein, it is shown by considering aspects specific to deep reinforcement learning, that …
-
Leaching from a 3D-printed aligner resin
… (LC-ESI-MS/MS for urethane dimethacrylate [UDMA] and LC-APCI-MS/MS for bispenol-A [BPA]). RESULTS: The resin was composed of aliphatic vinyl ester-urethane monomers, with acrylate and/or methacrylate functionalization. The degree of conversion was estimated as to 83%. There was no detection …
-
Propriedades físicas e biológicas de sistemas adesivos autocondicionantes experimentais
… % of monomeric mass of GDMA-P GDMA-P/ HEMA/ UDMA (10/30/30; 20/30/20 e 30/30/10); mol % of photoinitiators CQ/BAPO/EDMAB/DH (1,0/0,0/1,0/0,2; 0,0/1,0/0,0/0,2; 0,5/0,5/1,0/0,2). For cytotoxicity, NIH-3T3 cells and MTT Assay and Alamar Blue tests were used (n=8). To measure RRM, 54 third molars …
-
Einfluss verschiedener Lösungsmittel auf die Freisetzung von Monomeren aus dentalen Kompositen
… XT konnte in keiner der Proben Bisphenol A und UDMA 1 nachgewiesen werden. BisGMA wurde bei Lagerung in Ethanol und Aceton gefunden. TEGDMA wurde in allen vier Lösungsmitteln nachgewiesen und war im Speichel nach 7 Tagen Lagerungszeit in größeren Mengen vorhanden als in Ethanol. UDMA 2 wurde in …
-
Effects of Poly(Catechol-Styrene) in Dental Primers and Bonding to Zirconia
… was used to measure the conversion of UDMA in the absence of presence of PCS to determine if PCS was behaving as a radical scavenger. Results: Shear bond strength results showed that PCS did not improve bond strength to G-Cement to zirconia with the formulations used in this study. A …
-
Werkstoffkundliche Untersuchung von Polymer-infiltrierten tetrapodalen Zinkoxidnetzwerken unter Einfluss eines MDP-haltigen Primer und reinen Polymeren
… in zwei Untergruppen (je n=37) aufgeteilt: UDMA/TEGDMA und BisGMA/TEGDMA. Zum Vergleich wurden jeweils 37 reine Polymerproben aus UDMA/TEGDMA und BisGMA/TEGDMA hergestellt. Die biaxiale Biegefestigkeit wurde vor und nach einer Wasserlagerung (150 Tage bei 37 °C; 37.500 Thermozyklen zwischen …
-
Development of a graduated alumina polymer composite as a potential orthodontic bracket material
… (20-8) were infiltrated with UDMA/TEGDMA to test for compressive strength,<br/>modulus of elasticity and fracture toughness.<br/>Results: Graded ceramic structures of varying pore architecture were produced. Most of the<br/>ceramic scaffolds displayed porosity gradients across …
-
Impacto da adição do hidróxido de cálcio em adesivos autocondicionantes experimentais: influência no grau de conversão e PH
… formulated in two flasks: Bottle A, containing UDMA, HEMA, GDMA-P, TPO, DH and solvent; Bottle B: composed of UDMA, HEMA, TPO, DH. The solvents used were ethanol and water (1: 1). The concentration of Ca (OH) 2, added to flask B, in the mass fractions of 0% (control), 1%, 2% and 4% was …
-
Hochleistungsflüssigkeitschromatographie (HPLC): ein qualitativer und quantitativer Nachweis der Monomerfreisetzung aus kieferorthopädischen Werkstoffen
… (TEGDMA) und Urethandimethacrylat (UDMA). BPA eluierte aus Transbond™ Plus, - XT, - LR und BrackFix®. Die gemessenen kumulierten Mittelwerte von BPA differieren je nach Material von 16,04 ppm bis 64,83 ppm. TEGDMA eluierte aus Transbond™ LR mit einem Mittelwert von 688,61 ppm. UDMA …
-
Messmethoden zur Charakterisierung von Kompositfüllungswerkstoffen
… die Modifikation der Matrix durch Zugabe von UDMA auch in dieser Studie positiv auf die Biegefestigkeit aus. Außerdem zeigte die Weibullanalyse auch hohe Weibullparameter für diese Materialien, was auf eine gute Zuverlässigkeit zurückschließen läst. Die Schlussfolgerung der Asmussen Studie …
-
Flexural Strength and Fracture Toughness of Flowable Composites Containing Low Stress Monomers and Microcapsules
… low stress monomer in the continuous phase, the UDMA/TEGMA ratio within the continuous phase, the amount of glass loaded, the amount of fumed silica loaded, and the inclusion of low viscosity monomers. The study confirms that these variables affect the flexural strength and fracture toughness of …
-
Post sheer stress flow of flowable composites containing microcapsules
… Additionally, the replacement of bis-GMA with UDMA was studied due to the effort to replace BPA in dental materials. Additionally, these formulations also contained microcapsules capable of releasing bioavailable remineralizing ions. Therefore, there were three main objectives of this study: …
-
Flexural Strength of a Pit and Fissure Sealant Containing Microcapsules
… sealant formulations. In this study, bisGMA, UDMA and UMMA were explored as the toughening monomers. TEGMA was always the diluent monomer. The ratio of “toughening monomer:diluent monomer” was explored over a range of 4:1 through 1:1. Barium boroaluminosilicate glass was loaded over a range of …
-
Durabilidade da união à dentina e liberação de cálcio promovidas por sistemas adesivos experimentais com adição de hidróxido de cálcio
… Four adhesive systems were formulated including UDMA, HEMA, GDMA-P, TPO and diphenyl iodonium monomers as photoinitiator system, and ethanol/water as solvent with different mass fractions of calcium hydroxide: 0% (control), 1%, 2% and 4%. DBS was measured by the microtensile bond strength method …
-
Effect of Incorporation of Poly (Catechol-Styrene) Into Dental Adhesives on Bonding to Dentin
… evaluated. The effect of PCS directly mixed into UDMA on the polymerization kinetics was evaluated. Stability was measured by observable color changes every other day. Results: The 5 w/w % PCS primer was found to be statistically different with a mean shear bond strength of 0 ± 0 MPa. As the …
-
Biokompatibilität und Zytotoxizität von 3D-gedruckten zahnärztlichen Werkstoffen
… der Abwesenheit der beiden Monomere TEGDMA und UDMA scheint die geringste Beeinträchtigung der biologischen Funktionen auszulösen.
-
Effect of different percentages of silica nanofibers filler loads on mechanical and physical properties of flowable and hybrid composite resins
… or urethane dimethacrylate (UDMA) along with TEGDMA (tetraethylglycidylmethacrylate). Exhaustive researches has been conducted in recent years to improve physical and mechanical properties of resin-based dental composites, since the existing resin-filler systems may not be …
-
The influence of nanofiller particle size and surface treatment on dental composite
… properties of acrylate-based (50% BisEMA and 50% UDMA by weight) composites is examined, with the aim of investigating and optimizing the properties of nano-sized particle-filled composites typically used in restorative dentistry. Three classes of light-cured composites were prepared with various …
Page 1 of 3