Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"ULTEM 9085"”.
-
Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application
ULTEM 9085 is a high-performance thermoplastic used in the fused filament fabrication (FFF) additive manufacturing process. It has found use in applications where mechanical strength, chemical integrity, and thermal stability are of paramount importance. In this thesis, the effects of process …
-
Quasi-Static Tensile and Fatigue Behavior of Extrusion Additive Manufactured ULTEM 9085
… and cyclic fatigue tests were performed on ULTEM 9085 samples fabricated by fused deposition modeling (FDM). First, tensile tests were conducted following ASTM D638 on three different build orientations with default build parameters to determine the mechanical strength of FDM ULTEM 9085 with …
-
An integrated approach for characterization of properties and mesostructure for FDM Ultem 9085
… for Rapid Manufacturing, Polyetherimide (Ultem 9085) was created. This material is beneficial because it has superior mechanical and physical properties when compared with the commonly used thermoplastics in the FDM process. Ultem 9085 is particularly useful for the aerospace industry due …
-
Mechanické vlastnosti polymerů vyrobených 3D tiskem
… na anizotropii polymerů Nylon 12 a Ultem 9085 vyrobených 3D tiskovou technologií Fused Deposition Modeling. Hodnocení materiálových charakteristik bylo provedeno na základě zkoušek tahem a neinstrumentovaných rázových zkoušek. Bylo dokázáno, že materiálové charakteristiky jsou silně …
-
Development of a flow-based predictive model for the coalescence of fused deposition modeling filaments
… of materials available for the process such as Ultem 9085, prized by the aerospace industry for its high strength-to-weight ratio. To confidently employ FDM parts in service requires a thorough understanding of their behavior under expected loading conditions and the ability to predict their …
-
Stereoscopic Particle Image Velocimetry Measurements of Swirl Distortion on a Full-Scale Turbofan Engine Inlet
… hybrid wing body applications and was made of Ultem*9085 using additive manufacturing. Additional improvements to the StreamVane method are also described. Data reduction algorithms are put forth to reduce spurious velocity vectors. Uncertainty estimations specific to the inlet distortion test …
-
A Computational Analysis to Investigate the Aerodynamic Performance of Horizontal Axis Wind Turbines
… simulation of a 3D blade segment made of ULTEM 9085. The maximum deformation was found to be 0.0004 mm, which is negligible compared to the size of the blade segment. Moreover, the structural analysis indicated that this material could readily withstand stress loads. Finally, using NREL …