Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"UV Lasers"”.

  1. Microstructural and optical properties of metal oxide optical coatings deposited by ion beam sputtering and their application in UV spectral range /

    … of ion beam sputtered optical coatings for UV spectral range laser applications by optimizing plasma treatment of optical substrates, sputtering of material mixtures and post-deposition treatment of deposited coatings. Dissertation consists of introduction, literature overview, experimental …

    vilnius Repository record for Microstructural and optical properties of metal oxide optical coatings deposited by ion beam sputtering and their application in UV spectral range / (opens in a new tab)

  2. Development of Micro Stereolithography

    … forms of 3D printing, leverages the power of UV lasers and photopolymer resins to create detailed and complex structures. Micro SLA, a variant of this technology, is renowned for its ability to print at a much higher resolution, making it extremely useful in applications such as microfluidics, …

    buffalo Repository record for Development of Micro Stereolithography (opens in a new tab)

  3. In-situ laser tagging of barium ions in liquid xenon for the EXO experiment

    … ionization of liquid xenon using pulsed UV lasers was made while characterizing the purity monitor. The discovery was vital to the ability to accurately measure the purity of the liquid xenon. The spectroscopy of Ba+ ions in liquid xenon and the multiphoton ionization studies are the two …

    colostate Repository record for In-situ laser tagging of barium ions in liquid xenon for the EXO experiment (opens in a new tab)

  4. Quantifying Moss Response to Contaminant Exposure using Laser Induced Fluorescence

    … measured using LIF from 532 nm green and 355 nm UV lasers. Images of LIF response were captured using a CMOS camera and red-green-blue (RGB) decimal code values were extracted for each pixel in the images. Pixel densities of color channels from treated and untreated moss samples were compared …

    hawaii Repository record for Quantifying Moss Response to Contaminant Exposure using Laser Induced Fluorescence (opens in a new tab)

  5. Galimo reparacijos vyksmo ultravioletine spinduliuote apšvitintose odos ląstelėse tyrimas kometos metodu in vitro /

    … in recent decades, ultraviolet light spectrum lasers are becoming increasingly important microsurgical tools used in ophthalmology, dermatology, and other medical procedures. The high-energy, low-penetration rays emitted by UV lasers allow precise surgical procedures to be performed with …

    vilnius Repository record for Galimo reparacijos vyksmo ultravioletine spinduliuote apšvitintose odos ląstelėse tyrimas kometos metodu in vitro / (opens in a new tab)

  6. Passively Q-switched Nd:YAG lasers and their use in UV light generation

    … to realize new kinds of solid state lasers that utilize powerful diode lasers as pump sources. A laser medium has often several appropriate transitions that provide conditions for lasing. Bright pump sources that have recently become available enable building of efficient lasers for …

    aalto Repository record for Passively Q-switched Nd:YAG lasers and their use in UV light generation (opens in a new tab)

  7. Präparation, Charakterisierung und Anwendung von photovernetzbaren Mikrogelen

    … in 1-Methylnaphthalin unter Einsatz eines UV-Lasers mit λ = 355 nm am effizientesten abläuft. Diese experimentellen Parameter gestatte-ten den Einsatz der gleichen hochkonzentrierten Dispersionen in der Photover-netzung, Fluoreszenzmikroskopie und Lichtstreuung.<br>Die Anwendung der …

    freiburg-diss Repository record for Präparation, Charakterisierung und Anwendung von photovernetzbaren Mikrogelen (opens in a new tab)

  8. Laser micromachining of biodegradable polymers and ceramics

    … with photon or particle beam techniques, and lasers play an important role. Lasers are the most promising tools for micromachining because the beam is highly localized and the beam properties make it a perfect tool for micromachining applications. Implantable medical devices are currently …

    iastate Repository record for Laser micromachining of biodegradable polymers and ceramics (opens in a new tab)

  9. Gamma-ray Imaging Diagnostic for Inertial Confinement Fusion

    … Confinement Fusion (ICF). This occurs when 192 UV lasers interact with the inner walls of a gold cylinder, known as a hohlraum, and produce X-rays. Inside the hohlraum consists a capsule filled with deuterium and tritium. The X-rays ablate the outer plastic shell causing an inward shockwave to …

    arizona-thes Repository record for Gamma-ray Imaging Diagnostic for Inertial Confinement Fusion (opens in a new tab)

  10. Plonasluoksnių galio nitrido dangų modifikavimas lazerine femtosekundine UV spinduliuote /

    … time. Most approaches employ femtosecond lasers with wavelengths longer than ultraviolet. However, shorter UV wavelengths could further reduce heat-affected zones due to linear (single-photon) absorption and a smaller focal point, which is directly proportional to the wavelength. While …

    vilnius Repository record for Plonasluoksnių galio nitrido dangų modifikavimas lazerine femtosekundine UV spinduliuote / (opens in a new tab)

  11. Development, characterization and application of a high average power capillary discharge soft x-ray laser

    … of the size of many widely utilized visible and UV lasers has been developed and characterized. Two significant differences from previously developed capillary discharge soft x-rays lasers, the use of ceramic capillaries rather than poly-acetal and significantly longer plasma columns of up to 36 …

    colostate Repository record for Development, characterization and application of a high average power capillary discharge soft x-ray laser (opens in a new tab)

  12. IMPROVING EFFICIENCY OF VISIBLE AND DEEP UV LEDS AND LASERS

    … To enable efficient electrically injected deep-UV photonic devices, a detailed study of Mg doping in AlGaInN is performed. A significant enhancement of Mg incorporation efficiency is observed for InGaN and AlGaN alloys compared to GaN. Optimal Mg doping concentration in InGaN results in a very …

    cornell Repository record for IMPROVING EFFICIENCY OF VISIBLE AND DEEP UV LEDS AND LASERS (opens in a new tab)

  13. Development of Blue and Near-UV III-Nitride Laser Diodes

    III-Nitrides show tremendous promise for a wide range of laser diodes and other optoelectronics devices. The wide range of emission wavelengths possible makes these devices ideal candidates for a wide range of applications. Despite this, several challenges remain unsolved, limiting the efficiency …

    rit Repository record for Development of Blue and Near-UV III-Nitride Laser Diodes (opens in a new tab)

  14. Infrared Laser Ablation of Biomolecules from Formalin-Fixed Tissue

    … advancements, such as the use of nanosecond UV lasers, are anticipated to enhance precision and expand the method’s applications in spatial proteomics. Additionally, integrating detergent cleanup steps into the bottom-up proteomics workflow can improve protein identification, particularly in …

    lsu-thes Repository record for Infrared Laser Ablation of Biomolecules from Formalin-Fixed Tissue (opens in a new tab)

  15. Novel absorption detection techniques for capillary electrophoresis

    … raises a big challenge to detection methods. For UV-vis absorption detection, the concentration sensitivity is only at the [mu]M level. Most commercial CE instruments are equipped with incoherent UV-vis lamps. Low-brightness, instability and inefficient coupling of the light source with the …

    iastate Repository record for Novel absorption detection techniques for capillary electrophoresis (opens in a new tab)

  16. The study of atomic quasi-stable states, decoherence and cooling of mesoscale particles

    … electrons were created by ultraviolet (UV) lasers with two different frequencies, the survival peaks could be modulated by continuously changing the phase difference between the UV and the IR laser. The quantum simulation, through directly solving the Schr¨odinger equation, matches the …

    purdue-thes Repository record for The study of atomic quasi-stable states, decoherence and cooling of mesoscale particles (opens in a new tab)

  17. Investigation on hafnium oxide mixtures for UV coatings for fusion energy applications

    … crucial role in optical coatings for high power lasers. High laser damage resistance optical coatings find use in vacuum windows, mirrors, laser crystals, and harmonic generation crystals in high average and peak power lasers. The laser damage of multi-layer dielectric optical coatings is limited …

    colostate Repository record for Investigation on hafnium oxide mixtures for UV coatings for fusion energy applications (opens in a new tab)

  18. Nanofabrication of 2D photonic crystals for PCSELs emitting in UV region

    Lasers are light sources that produce coherent beams. Semiconductor lasers offer notable advantages such as compact size, lower power consumption, and extended lifespan over other laser types. Among different semiconductor lasers, photonic crystal surface-emitting lasers (PCSELs) are recognized for …

    chalmers Repository record for Nanofabrication of 2D photonic crystals for PCSELs emitting in UV region (opens in a new tab)

  19. Zinc oxide nanophotonics : toward quantum photonic technologies

    … light emitting diodes (LEDs) and ultraviolet (UV) lasers. Significantly ZnO has recently been identified as a promising candidate for quantum photonic technologies. Thus in this thesis the optical properties of ZnO micro- and nano-structures were investigated for ZnO nanophotonic technologies, …

    uts Repository record for Zinc oxide nanophotonics : toward quantum photonic technologies (opens in a new tab)

  20. Optical cavity integrated surface ion trap for enhanced light collection

    Ion trap systems allow the faithful storage and manipulation of qubits encoded in the energy levels of the ions, and can be interfaced with photonic qubits that can be transmitted to connect remote quantum systems. Single photons transmitted from two remote sites, each entangled with one quantum …

    unm Repository record for Optical cavity integrated surface ion trap for enhanced light collection (opens in a new tab)