Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"UWB Receiver"”.
-
Algorithms and Architectures for UWB Receiver Design
Impulse-based Ultra Wideband (UWB) radio technology has recently gained significant research attention for various indoor ranging, sensing and communications applications due to the large amount of allocated bandwidth and desirable properties of UWB signals (e.g., improved timing resolution or …
-
Channel shortening equalizers for UWB receiver design simplification
Ultra Wideband (UWB) communication systems occupy large bandwidths with very low power spectral densities. This feature makes UWB channels highly rich in multipaths. To exploit the temporal diversity, a UWB receiver usually incorporates Rake reception. Each multipath in the channel carries just a …
-
Multi-band OFDM UWB receiver with narrowband interference suppression
… (MB-OFDM) compatible ultra wideband (UWB) receiver with narrowband interference (NBI) suppression capability is presented. The average transmit power of UWB system is limited to -41.3 dBm/MHz in order to not interfere existing narrowband systems. Moreover, it must operate even in the …
-
A low-power agile coherent IR-UWB receiver with non-coherent-assisted synchronization
Impulse Radio Ultra Wide Band (IR-UWB) has recently received significant attention for short-range wireless communication applications. The unique properties of IR-UWB systems have made them more prevalent in today’s wearable and Internet of Things (IoT), sensor nodes, healthcare devices and …
-
Novel Approaches in RF/Analog CMOS Spectrum Sensing and Its Applications
… for primary signal detection and ultra-wideband (UWB) radio for interferer detection. There are several approaches for spectrum sensing. Choosing a proper method for spectrum sensing necessitates evaluating several trade-offs among sensing time, accuracy, power consumption and simplicity of …
-
A dual-mode Q-enhanced RF front-end filter for 5 GHz WLAN and UWB with NB interference rejection
… with the emerging ultra Wideband standard (UWB) for short range and high speed communications, the two standards promise to fulfil all areas of wireless application needs. However, due to the overlapping of the two spectrums, the stronger 802.11a signals tend to interfere causing degradation …
-
Power Line Communications over Power Distribution Networks of Microprocessors - Feasibility Study, Channel Modeling, and a Circuit Design Approach
… we considered impulse-based ultra wideband (I-UWB) communication technology for PLC over PDNs of microprocessors. I-UWB has several advantages for PLC over PDNs due to its robustness to multipath effects, simple hardware for transmission and reception of pulses and, more importantly, reduced …
-
Digital CMOS Design for Ultra Wideband Communication Systems: from Circuit-Level Low Noise Amplifier Implementation to a System-Level Architecture
… for commercialization of ultra wideband (UWB) radios due to its low power and low cost. In addition to CMOS implementation, UWB radios would also significantly benefit from a radio architecture that enables digital communications. In addition to the normal challenges of CMOS RFIC design, …
-
Performance of orthogonal and non-orthogonal TH-PPM for multi-user UWB communication systems
… and compared with different ultra wideband (UWB) channel models. Time hopping (TH) is used to decrease the effect of interference in multi access environments. Rake receiver is studied as an ideal UWB receiver for multiuser environments. It is shown that an ideal rake (I-Rake) receiver has …
-
Design of CMOS receivers and building blocks for ultra- wideband radio
In this thesis, receiver systems and CMOS integrated circuits design for Ultra-Wideband (UWB) communication are proposed.Several building blocks for the receivers are designed in a 0.18-i?-m CMOS technology. Cross-coupled transistors with source followers are used to implement the multiplier. …
-
Design and analysis of compact antennas for wireless front -end
… OF AN INTERFERENCE-ROBUST ULTRA-WIDEBAND (UWB) RECEIVER FRONT-END IS PRESENTED. A PLANAR UWB MONOPOLE ANTENNA WITH BAND-NOTCH FUNCTION IS DESIGNED BY INCORPORATING A QUARTER-WAVELENGTH TUNING STUB. THEN, A 3-10 GHZ UWB LNA IN 0.18-UM CMOS PROCESS IS DESIGNED. THIS LNA UTILIZES A CURRENT …
-
Synchronization for impulse radio ultra-wideband system
Ultra-Wideband (UWB) communication systems provide better performance over conventional wireless communication schemes. Traditionally, RAKE receivers are adopted in UWB receiver to explore rich multi-path components incorporated in the received signal. To improve the performance of a RAKE receiver, …
-
Channel estimation and equalization for ultra-wideband communications with pulse position modulation
… we consider the design of an ultra-wideband (UWB) receiver. We investigate channel estimation and equalization algorithms of ultra-wideband radio with pulse position modulation. We propose a completely blind channel estimation method based on the first-order cyclostationarity in the received …
-
Design and analysis of an integrated low-power ultra-wideband receiver
… of a low-power integrated ultra-wideband (UWB) receiver that is well suited for usage in medium to low rate, location aware communication systems. For the first time, this receiver design explores and exploits the unique properties of UWB pulse technology. By exploiting low emission power …
-
Compressed sensing approach to ultra-wideband receiver design
… speed communication. However, Ultra-wideband (UWB) communication promises a high speed communication because of its very wide bandwidth of 7.5GHz (3.1GHz-10.6GHz). The unprecedented bandwidth promises many advantages for the 21st century wireless communication system. However, UWB has many …
-
A low power, high dynamic-range, broadband variable gain amplifier for an ultra wideband receiver
… applications, such as an Ultra Wideband (UWB) receiver system. The gain can be programmed from 0dB to 42dB in 2dB increments with -3dB bandwidth greater than 425MHz for the entire range of gain. The 3rd-order intercept point (IIP3) is above -13.6dBm for 1Vpp differential input and output …
-
Direct Conversion RF Front-End Implementation for Ultra-Wideband (UWB) and GSM/WCDMA Dual-Band Applications in Silicon-Based Technologies
… two parts: One, implementation of a RF front-end receiver for an ultra-wideband system and, two, implementation of a local oscillation (LO) signal for a GSM/WCDMA multiband application. For emerging ultra-wideband (UWB) applications, the key active components in the RF front-end receiver were …
-
CMOS circuits for multi-antenna communication systems.
… into a dual-mode architecture for a phased-array receiver providing us with the advantages of both. The prototype, operating at 2.4-GHz, is fabricated in a 0.13-μm CMOS technology. It requires lower power and area compared to previous state-of-the-art designs. Measurement results from this …
-
An ultra-wideband transceiver for high data rate wireless biotelemetry
… best of the author's knowledge Ultra-Wideband (UWB) technology is employed for the first time in biotelemetry applications. The UWB approach has inherent strengths due to the impulse transmission nature of the digital baseband signal. These strengths include substantial reductions in hardware …
-
Ultra-Wideband Channel Modeling using Singularity Expansion Method
Ultra-wideband (UWB) communications is expected to revolutionize high data-rate, short-distance wireless communications, providing data-rates in excess of 100 Mbps. However, the wireless channel distorts the transmitted signal by dispersing the signal energy over time. This degrades the output …
Page 1 of 2