Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"Ullage"”.
-
A Computational Fluid Dynamics Analysis of the Temperature and Impurity Profiles in the Protodune-sp Neutrino Detector
… and analyzed. A CFD model of the detector’s ullage region was also developed, and preliminary temperature and impurity results were noted and analyzed. In the liquid region, it was found that a 0.3 K temperature increase, a 200 W/m3 field cage heat source, and the addition of the Valencia …
-
Analysis of Natural Convection Flow in a Detector Using Computational Fluid Dynamics
… 3) the boundary condition employed at the liquid-ullage interface, i.e. slip vs. no slip. The effect of mesh refinement was analyzed by comparing the results of six levels of mesh refinement, ranging from 40.8 to 151.6 million cells. The simulation was also completed for turbulent Schmidt numbers …
-
Cryogenic Sloshing in Aircraft Fuel Tanks
… hydrogen aircraft fuel tanks can induce rapid ullage pressure and temperature drops, potentially causing cavitation in cryogenic pumping systems and compromising fuel delivery systems. Sloshing events may be initiated during taxiing, take-off, landing, and turbulence, with large accelerations …
-
Experimental Investigation of N2O/O2 Mixtures as Volumetrically Efficient Oxidizers for Small Spacecraft Hybrid Propulsion Systems
… reaches saturation level. Oxygen in the mixture ullage dilutes the nitrous oxide vapor, and increases the required decomposition activation energy of the fluid by several orders of magnitude. Data from tests using each oxidizer are analyzed and presented for performance comparisons. Comparisons …
-
Thermodynamic Analysis of an Autogenous Pressurization System
… of liquid propellant to fill the ever-increasing ullage space with its own warm, low-density gas. Motivation for this research originates from the University of Tennessee Space Institute’s (UTSI) contract with Gloyer-Taylor Laboratories (GTL) to assist the development of an innovative …
-
Enabling Conceptual Design and Analysis of Cryogenic In-Space Vehicles through the Development of an Extensible Boil-Off Model
… achieved with direct venting, which affects the ullage region alone. The ability of the model to predict the conditions in the tank during pressurization is validated using several LH2 self-pressurization experiments from literature. Once the fidelity in the pressurization rate, and thus …
-
Quantifying the Performance of the Protodune Single Phase Neutrino Detector Using Computational Fluid Dynamics
The goal of this research is to provide scientifically-valid computationally generated data of the flow, thermal, and impurity data of the ProtoDUNE single phase detector. Results are compared and validated against an actual detector that is currently being utilized to collect temperature and …
-
Increasing flight safety
… when certain conditions are fulfilled; the fuel ullage area is then pressurised to 4psi and the rate of change in the pressure drop is measured over a period. Several experiments have been conducted and the results show that a continuous fuel leak of one litre per minute can be detected. Further …
-
Static Headspace-Gas Chromatography-Ion Mobility Spectrometry (SHS-GC-IMS): Its Novel Application to Delineate Quality Grading, Oxidative Alteration, and Ageing Effects in New Zealand Wines
… during wine storage or bulk transport, where ullage may be present or continual oxygen ingress may be occurring. Ageing of wine can impart both positive and negative changes in aroma, depending on the duration of ageing and the storage temperature. e 24-month ageing e ects on four New Zealand …