Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"Ultem"”.

  1. Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application

    ULTEM 9085 is a high-performance thermoplastic used in the fused filament fabrication (FFF) additive manufacturing process. It has found use in applications where mechanical strength, chemical integrity, and thermal stability are of paramount importance. In this thesis, the effects of process …

    unf Repository record for Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application (opens in a new tab) Download PDF for Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application (opens in a new tab)

  2. Quasi-Static Tensile and Fatigue Behavior of Extrusion Additive Manufactured ULTEM 9085

    … and cyclic fatigue tests were performed on ULTEM 9085 samples fabricated by fused deposition modeling (FDM). First, tensile tests were conducted following ASTM D638 on three different build orientations with default build parameters to determine the mechanical strength of FDM ULTEM 9085 with …

    vt Repository record for Quasi-Static Tensile and Fatigue Behavior of Extrusion Additive Manufactured ULTEM 9085 (opens in a new tab)

  3. An integrated approach for characterization of properties and mesostructure for FDM Ultem 9085

    … for Rapid Manufacturing, Polyetherimide (Ultem 9085) was created. This material is beneficial because it has superior mechanical and physical properties when compared with the commonly used thermoplastics in the FDM process. Ultem 9085 is particularly useful for the aerospace industry due …

    missouri Repository record for An integrated approach for characterization of properties and mesostructure for FDM Ultem 9085 (opens in a new tab)

  4. An Investigation of the Structure-Property Relationships for High Performance Thermoplastic Matrix, Carbon Fiber Composites with a Tailored Polyimide Interphase

    … The structure-property relationships of Ultem-type polyimide and BisP-BTDA polyimide which were made from various water soluble polyamic acid salts were studied. The molecular weight of the polyimides was shown to be dependant upon the selection of the base used for making the polyamic …

    vt Repository record for An Investigation of the Structure-Property Relationships for High Performance Thermoplastic Matrix, Carbon Fiber Composites with a Tailored Polyimide Interphase (opens in a new tab)

  5. The Effect Of Atomic Oxygen On Additively Manufactured Materials

    … in this thesis. Stainless steel, aluminum, ULTEM™, and titanium samples made using differing AM techniques were exposed to 24 hours of AO in order to calculate material susceptibility in the form of erosion yield. Additionally, reflectance spectra were collected to detect changes in material …

    calpoly Repository record for The Effect Of Atomic Oxygen On Additively Manufactured Materials (opens in a new tab)

  6. Structural Locking in a Nastic Actuated Shaped-Changing Beam

    … helps a designer select the locking material, Ultem. The analysis proves that the Ultem film?s shear spring constant is high enough to hold the aluminum spar?s spring back. Physical experiment conditions might differ from computer simulation because environmental limitations might be present. …

    tamu Repository record for Structural Locking in a Nastic Actuated Shaped-Changing Beam (opens in a new tab)

  7. Characterization of Dynamic and Static Mechanical Behavior of Polyetherimide

    … to munitions is Polyetherimide, referred to as Ultem. This thesis characterizes both the static and dynamic mechanical behavior of Ultem 1000 through experimental methods and numerical simulations. Standard compression experiments were conducted on and MTS test frame to characterize the …

    ucf Repository record for Characterization of Dynamic and Static Mechanical Behavior of Polyetherimide (opens in a new tab)

  8. Studies of Radiation Effects in Three High Polymers

    Three high polymers, Mylar®, Ultem®, and Kapton®, were irradiated to total doses of 1, 5, and 9.5 gigarad using 1-MeV electrons. The glass transition temperatures (Tg) of the materials before and after irradiation were measured using an AC electrical dissipation factor technique. From the Tg data, …

    odu Repository record for Studies of Radiation Effects in Three High Polymers (opens in a new tab)

  9. Comparative Analysis of Additive Manufactured Injection Molding Tools

    … is investigated. Two plastic mold materials viz. ULTEM 1010 and HI-TEMP 300 AMB produced via the fused deposition modeling (FDM) and stereolithography (SLA) additive manufacturing processes respectively were studied. A Machined 6061 aluminum mold tool was used as the base mold tool material. The …

    umn Repository record for Comparative Analysis of Additive Manufactured Injection Molding Tools (opens in a new tab)

  10. Mechanické vlastnosti polymerů vyrobených 3D tiskem

    … na anizotropii polymerů Nylon 12 a Ultem 9085 vyrobených 3D tiskovou technologií Fused Deposition Modeling. Hodnocení materiálových charakteristik bylo provedeno na základě zkoušek tahem a neinstrumentovaných rázových zkoušek. Bylo dokázáno, že materiálové charakteristiky jsou silně …

    brno-tech Repository record for Mechanické vlastnosti polymerů vyrobených 3D tiskem (opens in a new tab)

  11. Development of a flow-based predictive model for the coalescence of fused deposition modeling filaments

    … of materials available for the process such as Ultem 9085, prized by the aerospace industry for its high strength-to-weight ratio. To confidently employ FDM parts in service requires a thorough understanding of their behavior under expected loading conditions and the ability to predict their …

    missouri Repository record for Development of a flow-based predictive model for the coalescence of fused deposition modeling filaments (opens in a new tab)

  12. DESIGN AND PERFORMANCE ASSESSMENT OF A MODULAR ADDITIVE MANUFACTURED AXISYMMETRIC MACH 5+ HYPERSONIC TUNNEL

    … Mach 5+ hypersonic wind tunnel fabricated from ULTEM™ 9085 was designed, computationally analyzed, and experimentally validated. The design started with optimizing the tunnel geometry using an axisymmetric method of characteristics code while accounting for boundary layer growth, tunnel unstart …

    nps Repository record for DESIGN AND PERFORMANCE ASSESSMENT OF A MODULAR ADDITIVE MANUFACTURED AXISYMMETRIC MACH 5+ HYPERSONIC TUNNEL (opens in a new tab)

  13. A sorption and dilation investigation of amorphous glassy polymers and physical aging

    … of varying chain flexibility: Matrimid® , Ultem® and Lexan® (Tg = 313, 215 and 150°C respectively). Since the lattice fluid equation of state is intend for use on equilibrium media, only partial descriptions of solubility are expected. A variation of the Sanchez-Lacombe equation of state …

    texas Repository record for A sorption and dilation investigation of amorphous glassy polymers and physical aging (opens in a new tab)

  14. NANOLAYER POLYMERIC COATINGS TO ENHANCE THE PERFORMANCE AND SERVICE LIFE OF INORGANIC MEMBRANES FOR HIGH TEMPERATURE-HIGH PRESSURE BIOMASS PRETREATMENT AND OTHER APPLICATIONS

    … and mechanically robust polymer, polyetherimide (Ultem) was applied on nanoporous membranes using a solution-based coating method. The main objective was to demonstrate the potential success of nanoporous inorganic membranes to perform organic separations with high throughput at high temperatures …

    utk-theses Repository record for NANOLAYER POLYMERIC COATINGS TO ENHANCE THE PERFORMANCE AND SERVICE LIFE OF INORGANIC MEMBRANES FOR HIGH TEMPERATURE-HIGH PRESSURE BIOMASS PRETREATMENT AND OTHER APPLICATIONS (opens in a new tab)

  15. Characterization of the Integration of Additively Manufactured All-Aromatic Polyimide and Conductive Direct-Write Silver Inks

    … and relative to existing AM substrates, such as ULTEM 1010. The temperature stability of UV-DIW PI enabled higher-temperature post-processing for the printed silver traces, which decreased DIW trace resistivity from 14.94±0.55 times the value of bulk silver at 160 °C to 2.16±0.028 times the …

    vt Repository record for Characterization of the Integration of Additively Manufactured All-Aromatic Polyimide and Conductive Direct-Write Silver Inks (opens in a new tab)

  16. Multi-Axis Multi-Material Fused Filament Fabrication with Continuous Fiber Reinforcement

    … thermoplastic sold under the Sabic brandname ULTEM 1000 was acquired in pellet form and extruded within tolerances into a usable 3D printing filament. ULTEM 1000-Continuous Carbon Fiber filament was developed by dissolving the ULTEM 1000 pellets in a solution bath and consequently pulling the …

    south-carolina Repository record for Multi-Axis Multi-Material Fused Filament Fabrication with Continuous Fiber Reinforcement (opens in a new tab)

  17. Electrospinning as a Processing Method for Electroactive Polymers and Composites

    … carbon nanotubes within the fibers. Ultem®/aligned single-walled carbon nanotube fiber nanocomposites were also fabricated; these showed evidence of enhanced piezoelectric strain response relative to fibers composed of the matrix alone. Thermal and static mechanical testing of all …

    vcu Repository record for Electrospinning as a Processing Method for Electroactive Polymers and Composites (opens in a new tab)

  18. Stereoscopic Particle Image Velocimetry Measurements of Swirl Distortion on a Full-Scale Turbofan Engine Inlet

    … hybrid wing body applications and was made of Ultem*9085 using additive manufacturing. Additional improvements to the StreamVane method are also described. Data reduction algorithms are put forth to reduce spurious velocity vectors. Uncertainty estimations specific to the inlet distortion test …

    vt Repository record for Stereoscopic Particle Image Velocimetry Measurements of Swirl Distortion on a Full-Scale Turbofan Engine Inlet (opens in a new tab)

  19. Investigation of additively manufactured polymer and transparent polymer composites

    … This study focuses on the performance of FDM Ultem 1010 specimens intended to be used as composite tooling due the material's high heat resistance. A three-point bend test is performed for flexure properties while a single edge notch bend test is performed for fracture toughness. For each of …

    must-thes Repository record for Investigation of additively manufactured polymer and transparent polymer composites (opens in a new tab)

  20. The Effects of Electron Radiation on the Glass Transition Temperature of a Polyetherimide

    … of electron radiation on a polyetherimide (PEI), Ultem*, were investigated. In particular, the changes in the glass transition temperature (Tg) with absorbed radiation dose were studied. The polymer was exposed to mono-energetic beams of 100-keV electrons and 1.0-MeV electrons for doses up to 100 …

    odu Repository record for The Effects of Electron Radiation on the Glass Transition Temperature of a Polyetherimide (opens in a new tab)

Page 1 of 2