Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Ultra High Temperature Ceramic"”.
-
MOLTEN SAND INDUCED DEGRADATION OF ULTRA HIGH TEMPERATURE CERAMIC DIBORIDES
… of gas turbine engines (GTE) is leading to higher operational temperatures within GTEs. Thermal and environmental barrier coatings (T/EBC) applied to turbine blades (typically the hottest component) allow for temperatures to reach as high as 1700 °C. T/EBCs; however, they are susceptible to …
-
Development of an Advanced Composite Material Consisting of Iron Matrix Reinforced with Ultra High Temperature Ceramic Particulate (TiB2) with Optimum Properties
… of iron based composite reinforced by ultra high temperature ceramics fabricated by powder metallurgy technique. The fabrication parameters were optimized and composite samples with different volume fraction of TiB2 were fabricated and were subjected to different mechanical tests. The …
-
ZrB2-SiC Based Ultra High Temperature Ceramic Composites: Mechanical Performance and Measurement and Design of Thermal Residual Stresses for Hypersonic Vehicle Applications
Ultra-high temperature ceramics (UHTCs), such as ZrB2-based ceramic composites, have been identified as next generation candidate materials for leading edges and nose cones in hypersonic air breathing vehicles. Mechanical performance of ceramic composites play an important role in the ultra-high …
-
Mechanical Properties And Thermal Residual Stresses Of Zrb2-sic Ceramic Composites For Hypersonic Vehicle Applications
Ultra High Temperature Ceramic (UHTC) ZrB2- 10, 20, 30wt%SiC composites are of high interest for use in hypersonic air-breathing vehicles. In this work, ZrB2- 10, 20, 30wt%SiC UHTC composites were produced by the Spark Plasma Sintering (SPS) technique. After sintering, almost dense ceramics with ~ …
-
Advanced Synthesis of Ultra-High Temperature Ceramics (UHTCs) and High Temperature Electron Emitting Materials
… have the inherent capability to resist extreme temperatures, high thermal shock due to high heat flux, and high oxidation and ablation. First, the ultra-high temperature ceramic (UHTC) zirconium diboride or ZrB2 was sintered by ultra-fast high temperature sintering (UHS). The UHS process was …
-
Atomistic Investigation of High Temperature Material Behavior
High temperature mechanical behavior of materials is of critical importance in a variety of contexts: next-generation reentry vehicles, hyper sonic flights, nuclear plants, engines, among many others. Creep is the dominant failure mechanism for materials used in such applications. Atomistic design …
-
Effect of solid solutions and second phases on the thermal conductivity of zirconium diboride ceramics
… focused on the thermal conductivity (k) of ZrB2 ceramics. The goal was to develop a better understanding of how various solid solutions and second phases affect the thermal and electrical transport in ZrB2, with a focus on the effect of C, W, and ZrC. The first study showed C additions improved …
-
Processing to Enable Direct-Write Additive Manufacturing of Ceramics and Ceramic Composites
… specifically the direct ink writing (DIW) and Ceramic On-Demand Extrusion (CODE) manufacturing processes, in order to produce ceramic and ceramic-based composite components. Strongly dispersed, concentrated (φ = 0.42), nanoparticle (d<sub>50</sub> ~0.3 µm), zirconia (ZrO<sub>2</sub>) pastes …
-
Optimization of High Entropy Borides for Advanced Applications
… subjected to a combination of harsh conditions (high temperatures, oxidising environment, mechanical stresses). To this aim, a significant attention was focused by the scientific and industrial communities on the Ultra High Temperature Ceramic (UHTC) materials, based on transition metal borides …
-
Characterization of High-Temperature Ceramics for Nuclear Fuels Applications
<p>Ultra-high-temperature ceramic compounds (UHTCs) are a broad class of ceramics that include transition and actinide metal carbides, nitrides, and borides. The physical properties of these materials, such as their elevated melting temperature and enhanced thermal conductivity, enable remarkable …
-
Additive Manufacturing of Ultra-High Temperature Carbide and Nitride Ceramics Using Reactive Selective Laser Sintering
… has been relatively straightforward compared to ceramics, especially non-oxides, owing to the complex processing conditions that these materials can require. Strong covalent, or ionic chemical bonds give non-oxides unique thermal, chemical, and mechanical properties but also prevent atomic …
-
Extrusion Based Ceramic 3D Printing - Printer Development, Part Characterization, and Model-Based Systems Engineering Analysis
Ceramics have been extensively used in aerospace, automotive, medical, and energy industries due to their unique combination of mechanical, thermal, and chemical properties. The objective of this thesis is to develop an extrusion based ceramic 3D printing process to digitally produce a casting …
-
Fabrication of ceramic components using freeze-form extrusion fabrication
… (FEF) has been developed for the fabrication of high temperature and ultra-high temperature ceramic-based components. The method is based on deposition of ceramic pastes using water as the medium. The FEF system components and their interaction are examined, and the main process parameters …
-
Protective Ultra-High Temperature Coatings/ Ceramics (UHTCs) for Ceramic Matrix Composites in Extreme Environments
… (Airbus trademark) materials against very high temperatures in extreme environment. Here, we concentrate on the application of this technology in combustion chambers, for example in orbital thrusters. During combustion, the composite material needs to be protected against oxidation caused …
-
Sintering techniques for microstructure control in ceramics
… in two classes of materials; zirconium diboride ultra high temperature ceramic composites, and all solid lithium-ion battery phosphate materials. ^ Investigation of zirconium diboride ceramics focused on the effects of zirconium carbide as a secondary or tertiary phase in ZrB2 and ZrB2 – SiC. …
-
Design & modeling of phase transforming ultra-high temperature metal ceramic multilayer composites
Ultra-high temperature ceramics are a class of materials that have found use in high-temperature structural applications due to their high melting temperatures and excellent high-temperature mechanical properties. Although this class of materials is well-suited to these applications at high …
-
Processing and Microstructural Characterization of Ultra-High Temperature Ceramics
… The technique features in energy saving owing to high heating rates and is very suitable for consolidation as well as diffusion bonding of electrical conductive advanced ceramic materials such as ultra high temperature ceramics (UHTCs). However, cooling rate in SPS also plays an important role as …
-
Aligned Continuous Cylindrical Pores Derived from Electrospun Polymer Fibers in Titanium Diboride
… of the porous structures of the sintered ceramic. Green bodies were formed by vacuum infiltrating an electrospun-fiber-filled mold with the colloidal TiB2 suspension. The size, volume, distribution, and dispersion of the pores were optimized by carefully selecting the sacrificial polymer, …
-
Fabricating Complex-Shaped Components by Room-Temperature Injection Molding of Aqueous Ceramic Suspension Gels
Water-based ceramic suspension gels (CeraSGels) effectively produced dense, near-net shape ceramic parts by room-temperature injection molding, a novel processing method based on traditional ceramic injection molding. This alternative method eliminated the need for heating and cooling feedstocks to …
-
The application of transpiration cooling as a thermal protection system for hypersonic vehicles
… on hypersonic vehicles. Such vehicles experience high peak heat fluxes and time-integrated heat loads throughout the ascent, re-entry, and cruise phases. The most significant heat fluxes occur at the stagnation point of sharp leading edges, regions of laminar-turbulent transition, or shock-wave …
Page 1 of 2