Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"Ultrasonic Inspection"”.

  1. Signal processing techniques for ultrasonic inspection

    … techniques. Special interest has been given to ultrasonic examination techniques and the problems encountered when they are applied to thick welded plates. Some suggestions are given using signal processing methods. Chapter 2 treats the need for nondestructive testing as seen in the light of …

    aston Download PDF for Signal processing techniques for ultrasonic inspection (opens in a new tab)

  2. Ultrasonic Inspection of Joined Aerospace Materials

    … Non Destructive Testing (NDT) techniques using Ultrasonic Testing.

    washington Repository record for Ultrasonic Inspection of Joined Aerospace Materials (opens in a new tab)

  3. Ultrasonic inspection of austenitic stainless steel weldments

    Ultrasonic waves interact in a complex manner with the metallurgical structure of austenitic weldments resulting in ambiguity when interpreting reflections and at times in misinterpretation of defect positions. In this work, current knowledge of the structure of austenitic welds is outlined, and …

    aston Download PDF for Ultrasonic inspection of austenitic stainless steel weldments (opens in a new tab)

  4. Unsupervised data-driven analysis of ultrasonic inspection data

    Ultrasonic inspection is a key part of condition-based maintenance in the nuclear power industry, and it is widely used for flaw detection and characterisation in critical components. The analysis of ultrasonic inspection datasets is a time-consuming and complex task commonly carried by expert …

    strathclyde Repository record for Unsupervised data-driven analysis of ultrasonic inspection data (opens in a new tab)

  5. A Statistical Approach to Ultrasonic Inspection for Complex Geometry

    … evaluation (NDE) is concerned with the inspection of a component for flaws, which can lead to a degradation in performance. Ultrasonic arrays have become a widely used tool in NDE as they may produce a visualisation of the scattering behaviour in the volume of a component through …

    bristol Repository record for A Statistical Approach to Ultrasonic Inspection for Complex Geometry (opens in a new tab) Download PDF for A Statistical Approach to Ultrasonic Inspection for Complex Geometry (opens in a new tab)

  6. MODELING OF ULTRASONIC INSPECTION METHODS FOR GENERATION IV REACTORS

    … design challenges for reactor plant in-service inspection (ISI) due to high operating temperatures, coolant opacities that prevent visual inspection, and the tendency for coolant corrosive attack. These challenges limit the feasibility and effectiveness of conventional ISI technologies. To …

    nps Repository record for MODELING OF ULTRASONIC INSPECTION METHODS FOR GENERATION IV REACTORS (opens in a new tab)

  7. Ultrasonic inspection of lithium-ion batteries to determine battery safety

    … This thesis explores the viability of ultrasonic inspection to determine battery safety in the event of an overcharge. Two detection criteria were investigated in this thesis: whether an overcharge event could be detected while it was occurring and whether ultrasonic inspection could …

    texas Repository record for Ultrasonic inspection of lithium-ion batteries to determine battery safety (opens in a new tab)

  8. Material characterization of nickel-based super alloys through ultrasonic inspection

    … data relating micro-structural features to ultrasonic properties, in turn controlling the inspectability, are not available. Knowledge of these relationships would facilitate improvements in current Ni billet inspections. A single scattering model has been found to be very effective in …

    iastate Repository record for Material characterization of nickel-based super alloys through ultrasonic inspection (opens in a new tab)

  9. Understanding and improving ultrasonic inspection of jet-engine titanium alloy

    … However, the detection of smaller defects by ultrasonic method in such materials is made difficult by the complicated ultrasound-microstructure interactions, such as the high backscattered grain noise levels and serious signal fluctuations. The objective of this research is to develop a more …

    iastate Repository record for Understanding and improving ultrasonic inspection of jet-engine titanium alloy (opens in a new tab)

  10. Ultrasonic inspection of lithium-ion batteries for early detection of thermal runaway

    … This thesis explores the viability of ultrasonic inspection for early damage detection in cells undergoing thermal abuse. Specifically, initial studies are reported on the use of ultrasonic wave measurements for detection of cell damage while simultaneously monitoring voltage, current, …

    texas Repository record for Ultrasonic inspection of lithium-ion batteries for early detection of thermal runaway (opens in a new tab)

  11. Applications of TAP-NDE technique to non-contact ultrasonic inspection in tubulars

    … localized defects in tubes using laser-induced ultrasonic wave approach through Thermo Acousto Photonic Non Destructive Evaluation (TAP-NDE) and Signal processing through wavelet transform is examined in this research. Guided waves in cylindrical surfaces provide solutions for detection of …

    tamu Repository record for Applications of TAP-NDE technique to non-contact ultrasonic inspection in tubulars (opens in a new tab)

  12. INFRARED THERMOGRAPHY AND ULTRASONIC INSPECTION OF ADHESIVE BONDED STRUCTURES, OVERVIEW AND VALIDITY

    … testing, namely Infrared Thermography and Ultrasonic Inspection. The integration of the two testing techniques is done with an expectation to achieve accurate characterization and determination of internal defects in adhesive bonded structures. Experiments are done on sandwich samples with …

    clemson Repository record for INFRARED THERMOGRAPHY AND ULTRASONIC INSPECTION OF ADHESIVE BONDED STRUCTURES, OVERVIEW AND VALIDITY (opens in a new tab)

  13. Advanced ultrasonic inspection technologies applied to the welded joints of hydraulic turbine runners

    … to identify methods that could provide better inspection results. The current project aims to provide IREQ with the performance of NDT methods to supply reliable flaw data (both measured and simulated) for their life estimation model. By increasing the accuracy of life estimations, Hydro-Québec …

    ets-quebec Download PDF for Advanced ultrasonic inspection technologies applied to the welded joints of hydraulic turbine runners (opens in a new tab)

  14. Non-Destructive Passive Magnetic and Ultrasonic Inspection Methods for Condition Assessment of Reinforced Concrete

    … concrete structures. A prototype of a magnetic inspection device was designed and built in the NDT lab at the University of Waterloo, using magneto-inductive sensors. The prototype can scan reinforcement by moving it on the concrete surface to assess corrosion state without damaging the …

    waterloo Repository record for Non-Destructive Passive Magnetic and Ultrasonic Inspection Methods for Condition Assessment of Reinforced Concrete (opens in a new tab)

  15. Development of an automated ultrasonic inspection cell for detecting subsurface discontinuities in cast iron

    … a market share of produced goods. An automated inspection cell was developed for the inspection of cast iron ports to detect subsurface discontinuities. The cell consists of an ultrasonic flaw detector (UFD), transducer, robot, immersion tank, computer, and software. Normal beam pulse-echo …

    northern-iowa Repository record for Development of an automated ultrasonic inspection cell for detecting subsurface discontinuities in cast iron (opens in a new tab)

  16. Optimal fitting and validation of computer simulated probability of detection curves from ultrasonic inspection

    … software CIVA by comparing them to industrial ultrasonic inspections on API 5L X-65 pipes. Finally, using a different subset of experimental data, demonstrates the difficulty on transferring optimized fitting.

    brazil-uerj Repository record for Optimal fitting and validation of computer simulated probability of detection curves from ultrasonic inspection (opens in a new tab)

  17. Feasibility study of ultrasonic inspection of thin laser welds on fuel cell bipolar plates

    … the characteristics of the failure. Laser weld inspection methods are many and varied. However, none have been evaluated to inspect internal defects in such small welds (about 200 μm wide). This thesis focuses on ultrasonic solutions that could address this issue. Ultrasonic testing has the …

    ets-quebec Download PDF for Feasibility study of ultrasonic inspection of thin laser welds on fuel cell bipolar plates (opens in a new tab)

  18. Evaluation of the reliability of nondestructive ultrasonic inspection methods for the detection and the characterization of defects in hydroelectric turbine welded joints

    … grow a crack from an initial size determined by inspection (or by the detection threshold) to failure. Accordingly, the dimension of existing flaws in the structure is one of the main inputs of these models. This input is generally characterized using the results of nondestructive testing (NDT) …

    ets-quebec Download PDF for Evaluation of the reliability of nondestructive ultrasonic inspection methods for the detection and the characterization of defects in hydroelectric turbine welded joints (opens in a new tab)

  19. Development of laser ultrasonic and interferometric inspection system for high-volume on-line inspection of microelectronic devices

    … of this thesis are to develop and validate laser ultrasonic inspection methods for on-line testing of microelectronic devices. Electronic packaging technologies such as flip chips and BGAs utilize solder bumps as electrical and mechanical connections. Since they are located hidden from view …

    gatech Repository record for Development of laser ultrasonic and interferometric inspection system for high-volume on-line inspection of microelectronic devices (opens in a new tab)

  20. Detection of Surface Corrosion by Ultrasonic Backscattering

    … This project centers on developing an in-situ ultrasonic inspection technique to detect corroded areas inside the fuel tank. Due to the complexity of the composite structure of the tank, the ultrasonic inspection is carried out from inside the tank using a monostatic backscattering technique. …

    gatech Repository record for Detection of Surface Corrosion by Ultrasonic Backscattering (opens in a new tab)

Page 1 of 4