Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 66 for “"Ultrasonic technique"”.

  1. Ultrasonic technique for chemical process control

    … using both low power, high frequency monitoring techniques and high power, low frequency process enhancement approaches. In many cases, standard ultrasonic systems are retrofitted to a process and while these produce efficiency improvements, the design of bespoke systems may offer more potential. …

    strathclyde Repository record for Ultrasonic technique for chemical process control (opens in a new tab)

  2. Statistical methods applied to acousto-ultrasonic technique

    … of composites limits the use of conventional techniques such as radiography , eddy-current or ultrasonics. Recently, a new technique known as the Acousto-Ultrasonic (AU) technique, has been developed and appears to hold promise as a method for the evaluation of composite material quality. …

    vt Repository record for Statistical methods applied to acousto-ultrasonic technique (opens in a new tab)

  3. Nondestructive Condition Assessment of Civil Infrastructure Using Ultrasonic Technique

    … component in-situ without causing any damage. Ultrasonic testing (UT) helps to adequately sustain and advance the safety in existing and future infrastructure across the globe. Continual advancement and use of UT methods for the application of condition assessment in the field of civil …

    wvu Repository record for Nondestructive Condition Assessment of Civil Infrastructure Using Ultrasonic Technique (opens in a new tab)

  4. Ultrasonic Technique for the Measurement of Stress in Bolts

    An ultrasonic bolt monitor based on the pseudo-continuous-wave principle has been designed and fabricated. This ultrasonic bolt monitor uses carrier phase detection to track the frequency of mechanical resonance of the bolt. In this thesis we have discussed theory and principle of this ultrasonic …

    marquette Repository record for Ultrasonic Technique for the Measurement of Stress in Bolts (opens in a new tab)

  5. Experimental characterization of creep damage using the nonlinearity ultrasonic technique

    … safe operation, nondestructive evaluation techniques to detect creep damage are needed. Nonlinear acoustic techniques employing longitudinal waves have been proven to be sensitive to creep damage. The objective of this research is to develop a robust experimental procedure to reliably …

    gatech Repository record for Experimental characterization of creep damage using the nonlinearity ultrasonic technique (opens in a new tab)

  6. Nonlinear ultrasonic technique for the characterization of microstructure in additive materials

    This thesis employs nonlinear ultrasonic techniques to track microstructural changes in additively manufactured (AM) metals. Adoption of AM in critical scenarios has been slowed by uncertainty stemming from variations in the resultant piece. Different print iterations of the same part could have …

    gatech Repository record for Nonlinear ultrasonic technique for the characterization of microstructure in additive materials (opens in a new tab)

  7. Determination of Crispness in Breaded Fried Chicken Nuggets Using Ultrasonic Technique

    … fried foods. In this study, the mechanical and ultrasonic techniques were used to determine crispness in breaded fried chicken nuggets under different storage conditions. The mechanical measurements have been made, using an Instron universal testing machine. An ultrasonic non-destructive …

    vt Repository record for Determination of Crispness in Breaded Fried Chicken Nuggets Using Ultrasonic Technique (opens in a new tab)

  8. Prediction of service load of concrete structures after cracking using ultrasonic technique

    … to assess their remaining service lives. A novel ultrasonic technique is utilized to detect crack propagation in notched beams of mortar, plain concrete and reinforced concrete. The study showed that crack growth and microcrack zone in cementitious composites can be quantitatively detected by the …

    njit Repository record for Prediction of service load of concrete structures after cracking using ultrasonic technique (opens in a new tab)

  9. Effect of Poisson’s Ratio on Young's Modulus Characterization Using Ultrasonic Technique by Modeling

    … a material using non-destructive testing (NDT). Ultrasonic simulation was used because Lamb wave velocity is dependent on the elastic properties of the transmission medium. Also, ultrasonic simulation shows more accuracy and non-destructive advantages over the tensile and indentation test. The …

    sdstate Repository record for Effect of Poisson’s Ratio on Young's Modulus Characterization Using Ultrasonic Technique by Modeling (opens in a new tab)

  10. Application of acousto-ultrasonic technique in evaluation of bond strength between composites and concrete substrates.

    … was to evaluate whether a non-destructive acoustoultrasonic parameters (AUP) evaluation method could be used to determine the shear strength of the bond between FRP systems and concrete substrates. Eighteen concrete beams were externally reinforced flexurally with carbon fiber reinforced polymers …

    louisville Repository record for Application of acousto-ultrasonic technique in evaluation of bond strength between composites and concrete substrates. (opens in a new tab)

  11. Utilization of PVDF sensors to determine impact damage in graphite/epoxy plates by acousto-ultrasonic technique

    A study into the use of metallized polyvinylidene fluoride (PVDF) foil sensors in the detection of impact damage of graphite/epoxy plates.

    concordia Download PDF for Utilization of PVDF sensors to determine impact damage in graphite/epoxy plates by acousto-ultrasonic technique (opens in a new tab)

  12. A feasibility study of the acousto-ultrasonic technique to assure the quality of adhesively bonded sheet metal

    … objective is to study the feasibility of Acousto-Ultrasonics (AU) as a nondestructive technique for assuring the quality of adhesively bonded sheet-metal used for automobiles. Other nondestructive (NDT) techniques were also applied viz., ultrasonics. radiography and thermography to supplement and …

    vt Repository record for A feasibility study of the acousto-ultrasonic technique to assure the quality of adhesively bonded sheet metal (opens in a new tab)

  13. An In Vitro Study Comparing the Conventional Step-Back Instrumentation Technique to a Combination Step-Back/Ultrasonic Technique

    … the effectiveness of the conventional step-back technique with that of a combination step-back/ultrasonic technique. This combination technique is a modification of the conventional step-back technique using an ultrasonic instrument alternately with hand instrumentation. Utilizing 40 canals from …

    loma-linda Repository record for An In Vitro Study Comparing the Conventional Step-Back Instrumentation Technique to a Combination Step-Back/Ultrasonic Technique (opens in a new tab)

  14. Ultrasonic Studies of Foods Containing Air

    … they are poorly characterised by the available techniques. Ultrasound has a complex interaction with bubbly liquids, which has the potential to be used as a means of non- destructively characterising bubbly food liquids. The ultrasonic velocity, attenuation coefficient and reflection coefficient …

    whiterose Download PDF for Ultrasonic Studies of Foods Containing Air (opens in a new tab)

  15. Inspection of weld penetration depth in thin structures using laser-generated lamb waves and emat receiver

    Using laser/EMAT ultrasonic technique to inspect penetration depths of welds in thin structures is limited by lack of effective signal interpretation methods. The laser-generated ultrasounds in thin structures are very complicated. This research conducts a systematic study to investigate how to …

    gatech Repository record for Inspection of weld penetration depth in thin structures using laser-generated lamb waves and emat receiver (opens in a new tab)

  16. Durability performance of advanced construction materials

    … are excellent sources of rehabilitation techniques; however, harsh environmental conditions may cause stiffness loss. New advances in Microwave Technology and Acousto-Ultrasonic Technique were proven to be an effective means for the investigation of detection of surface defects between …

    must-thes Repository record for Durability performance of advanced construction materials (opens in a new tab)

  17. Simulation Model and Ultrasound Study for Engineering Interfaces

    … and compared with experimental measurements. The ultrasonic method was applied to the greased pin joint contact and the oil lubricated ball-on-disc contact. Reflection measurements have been linked to the interface characteristics, including contact pressure, lubricating film thickness and contact …

    whiterose Download PDF for Simulation Model and Ultrasound Study for Engineering Interfaces (opens in a new tab)

Page 1 of 4