Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Ultrasound Testing"”.

  1. Marterial characterization of asphalt binder using ultrasound testing

    The Non-contact ultrasound (NCU) technology was used as an alternative to characterize the physical properties of asphalt binder. The objective of this research is to correlate the physical properties of asphalt binder with non-contact ultrasound measurements. The physical properties of asphalt …

    unlv Repository record for Marterial characterization of asphalt binder using ultrasound testing (opens in a new tab) Download PDF for Marterial characterization of asphalt binder using ultrasound testing (opens in a new tab)

  2. Ultrasound Testing System for the Detecting of the Shape and Growth of a Vapor Chamber in the VAPEX Process

    … in a water- or oil-saturated sand pack. The ultrasound receivers were placed on the physical model to detect the acoustic signals from the transducers. A MatlabTM based program was developed to do the signal processing using wavelet signal transform technique to extract the position of the …

    regina Repository record for Ultrasound Testing System for the Detecting of the Shape and Growth of a Vapor Chamber in the VAPEX Process (opens in a new tab) Download PDF for Ultrasound Testing System for the Detecting of the Shape and Growth of a Vapor Chamber in the VAPEX Process (opens in a new tab)

  3. Non-destructive Ultrasound Thickness Characterization of Parts Additively Manufactured by Fused Filament Fabrication

    … or slurries. A-scan mode or time-amplitude scan ultrasound testing provides a one-dimensional representation of material interfaces. This method uses sound waves and converts them into spikes that correspond with material interfaces, and therefore is commonly used for parts manufactured with …

    ottawa-retro Repository record for Non-destructive Ultrasound Thickness Characterization of Parts Additively Manufactured by Fused Filament Fabrication (opens in a new tab)

  4. Characterization and Optimization of Sand and Tung Oil-Based Resins for Binder-Jet 3D Printing

    … subjected to compression tests using a universal testing machine to determine its mechanical characteristics. Also, ultrasound testing was employed as a non-destructive method to assess the internal integrity and bonding quality of the composites. The resin’s viscosity was optimized through …

    gsu Repository record for Characterization and Optimization of Sand and Tung Oil-Based Resins for Binder-Jet 3D Printing (opens in a new tab)

  5. Utilization of Non-destructive Testing (NDT) Methods for Composite Material Inspection (Phased Array Ultrasonic)

    Various ultrasound techniques are widely used in the nondestructive testing (NDT) field and have seen a number of successful applications, such as for flaw detection and material property evaluation of composite materials. In conventional ultrasound testing, a single-element transducer is usually …

    sdstate Repository record for Utilization of Non-destructive Testing (NDT) Methods for Composite Material Inspection (Phased Array Ultrasonic) (opens in a new tab)

  6. Antibody dependent enhancement: a model for understanding congenital Zika syndrome

    … using large cohorts and more detailed lab testing and imaging is essential to better understand this relationship. A proposed study enrolling a large cohort of women in the 6th- 8th week of pregnancy from Northeastern Brazil will seek to further describe what additional risk dengue immunity …

    bu Repository record for Antibody dependent enhancement: a model for understanding congenital Zika syndrome (opens in a new tab)

  7. Frequency Domain Method for Resolution of Two Overlapping Ultrasonic Echoes

    … of axial scan resolution in ultrasonic testing. Overlapping echoes are frequently encountered in the inspection of shallow and/or short cracks in Time-of-Flight Diffraction and normal incidence reflection inspection of near surface flaws. Dictionary-based parametric representation (DBPR) …

    toronto-retro Repository record for Frequency Domain Method for Resolution of Two Overlapping Ultrasonic Echoes (opens in a new tab)

  8. Advanced automated detection of foreign object debris (FOD) in woven and uni-directional composite laminates.

    … catastrophic failure. This study used pulse-echo ultrasound testing for the detection and quantification of the dimensions of foreign object debris (FOD) within carbon fiber laminates. This study presents a method to create high-resolution c-scans, and from the full-waveform dataset extract the …

    baylor Repository record for Advanced automated detection of foreign object debris (FOD) in woven and uni-directional composite laminates. (opens in a new tab)

  9. Characterization of Particulate in Vacuum Casting for Long Term Space Flight

    … vacuum sealed particulate, and test therapeutic ultrasound's ability to penetrate the material. Materials and Methods: Samples were made that contained four different potential cast materials: ground coffee, sawdust, green clay powder and bentonite clay powder. Three point bending was conducted …

    clemson Repository record for Characterization of Particulate in Vacuum Casting for Long Term Space Flight (opens in a new tab)

  10. Obtaining Material Properties of the Plantar Soft Tissue for a Patient-Specific Finite Element Model of the Foot

    … tissue thickness changes were measured via an ultrasound transducer attached to the loading device. Finally, an MRI pilot study was completed in which the heel of a test subject was dynamically loaded in compression at a 0.2 Hz rate inside an MRI while three-dimensional (3-D) images were …

    washington Repository record for Obtaining Material Properties of the Plantar Soft Tissue for a Patient-Specific Finite Element Model of the Foot (opens in a new tab)

  11. DIAGNOSIS AND PROGNOSIS OF USED LITHIUM-ION BATTERIES

    … extended from direct thickness measurement to ultrasound testing (UT), where multi-point acoustic measurements provide internal mechanical information for large-format or constrained cells. Combining UT-derived features with EIS preserves the same central diagnostic principle: representative …

    oklahoma-thes Repository record for DIAGNOSIS AND PROGNOSIS OF USED LITHIUM-ION BATTERIES (opens in a new tab)

  12. WEIGHTED EFFECT OF CONCENTRATED CRACKING ON THE STRUCTURAL INTEGRITY OF CONCRETE BRIDGE DECKS

    … of concrete bridge decks. The study utilizes ultrasound testing to collect pulse velocity data across various surface crack concentrations on concrete bridge deck samples. The dimension of each sample size is 10 feet by 10 feet. Three frequency sensors—54 kHz, 150 kHz, and 250 kHz—are employed …

    wvu Repository record for WEIGHTED EFFECT OF CONCENTRATED CRACKING ON THE STRUCTURAL INTEGRITY OF CONCRETE BRIDGE DECKS (opens in a new tab)

  13. Acoustic metamaterials for ultrasound manipulation for non-destructive testing applications

    Non-destructive testing (NDT) is a collection of techniques for evaluating the health of a component without damaging it. Due to this characteristic, it can be widely applied for component manufacturing and the assessment of service life in industrial applications, such as weld joints inspection, …

    bristol Repository record for Acoustic metamaterials for ultrasound manipulation for non-destructive testing applications (opens in a new tab) Download PDF for Acoustic metamaterials for ultrasound manipulation for non-destructive testing applications (opens in a new tab)

  14. An Exploration of Methods to increase the speed of Array-based Ultrasound Imaging

    Ultrasound imaging is a widely used technique for non-destructive testing of large structures and<br/>surfaces and various other range of inspection needs. The use of array based imaging techniques<br/>has grown in recent years, with use of techniques, such as the Full Matrix Capture (FMC) …

    bristol Repository record for An Exploration of Methods to increase the speed of Array-based Ultrasound Imaging (opens in a new tab) Download PDF for An Exploration of Methods to increase the speed of Array-based Ultrasound Imaging (opens in a new tab)

  15. Physics-Aware Statistical Learning for Scientific Computing and Decision Making in Engineering Applications

    … a physics‑aware statistical ML framework for ultrasound testing in advanced manufacturing: combining function‑to‑function Gaussian Process regression with Amortized Variational Inference to estimate latent physical variables reflecting adhesive bond integrity and strength. This approach …

    gatech Repository record for Physics-Aware Statistical Learning for Scientific Computing and Decision Making in Engineering Applications (opens in a new tab)

  16. Gestión de mantenimiento para mejorar la disponibilidad en equipos trackless y raise bore en una empresa de servicio para mineria subterranea, utilizando tecnicas del mantenimiento predictivo

    El presente documento tiene como finalidad mostrar los resultados de la implementación de una solución de ingeniería basada en la aplicación de diferentes técnicas de mantenimiento predictivo a los equipos mineros que alquila la empresa analizada en tres proyectos mineros. Esta solución busca …

    upc-peru Repository record for Gestión de mantenimiento para mejorar la disponibilidad en equipos trackless y raise bore en una empresa de servicio para mineria subterranea, utilizando tecnicas del mantenimiento predictivo (opens in a new tab)

  17. Hodnocení stavu prefabrikované mostní konstrukce

    Bakalářská práce se zabývá hodnocením stavu prefabrikované mostní konstrukce na dálnici D46 u obce Drysice. Práce je obsahově rozdělena na teoretickou a praktickou část. Teoretická část se zabývá druhy prefabrikovaných mostních nosníků a jejich vadami. Dále přehledem metod pro průzkum těchto …

    brno-tech Repository record for Hodnocení stavu prefabrikované mostní konstrukce (opens in a new tab)