Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Unconventional Well"”.
-
Development of Engine Activity Cycles for the Prime-Movers of Unconventional Well Completion
… over the past decade. This has encouraged the well completion industry to utilize produced natural gas to meet power demands previously obtained with diesel fuel. The major "prime-movers" of diesel fuel consumption are over-the-road (OTR) trucks, high horsepower drilling, and high horsepower …
-
Coupled Fluid Flow and Geomechanical Modeling for Evaluating Unconventional Well Performance and Seismicity Risks
The success of unconventional shale applications in the oil and gas industry often require the understanding of pore pressure and stress/strain changes due to both injection and production. In order to evaluate the complex phenomena associated with both pore pressure and stress change, coupled …
-
Effect of Natural Gas Fuel Composition on Gaseous and Particle NumberMass Emissions from a Heavy-duty Natural Gas Engine used in Unconventional Well Development Operations
… and hydraulic fracturing. Prime movers of unconventional well development were previously identified to be over-the-road (OTR) trucks, drilling engines, and hydraulic stimulation engines. The increased NG reserves have driven the industry to shift from using diesel fueled engines to natural …
-
Relating Sonic Velocities, Minimum Horizontal Stress, and Natural Fracture Distribution to Stimulation Efficiency during Completion of the Marcellus Shale MIP-3H Unconventional Well, West Virginia, USA
… was acquired along the lateral of the MIP-3H well. This unconventional shale-gas well was completed within the Marcellus Shale just above the Cherry Valley Limestone, a thin limestone member separating organic rich units of the Marcellus. The geomechanical moduli, Poisson’s Ratio (PR) and …
-
Energy and water production trends in the Powder River Basin
… hydrocarbon extraction from conventional and unconventional reservoirs using data from the Powder River Basin in Wyoming as a case study. Field level and detailed well-by-well analyses were conducted to quantify the spatiotemporal variability of oil and gas volumes and the corresponding …
-
ECONOMIC PROFITABILITY OF THE BAKKEN, NORTH DAKOTA UNCONVENTIONAL OIL PLAYS BASED ON A TYPICAL WELL PERFORMANCE WITH CURRENT MARKET CONDITIONS
… the conventional oil extraction increase, but unconventional oil production and exploration also improved greatly with the favorable economic conditions. This favorable economy encourages companies to invest in new reservoirs and technological developments. Recently, enhanced drilling …
-
Various topics in unconventional reservoir simulation
… as hydraulic fracturing and horizontal drilling, unconventional resource development has exploded in recent years. Nevertheless, significant challenges remain for shale reservoirs because of the extensive number of uncertainties. Without proper characterization processes, extracting economic …
-
Modeling performance of horizontal, undulating, and multilateral wells
Horizontal, undulating, and multilateral wells are relatively new alternatives in field development because they can increase the productivity per well and reduce the cost of field development. Because the feasibility of these wells may not be valid in some reservoirs, well performance should be …
-
Elastic Reverse-Time Migration Imaging Using Perforation Shots and Vertical Receiver Arrays
… in a perforation shot monitoring in an unconventional well and is demonstrated to be a potentially feasible imaging technique for near borehole subsurface structure. Imaging quality is then demonstrated to be dependent on acquisition geometry as described by the Nyquist sampling theorem. …
-
Modeling proppant flowback to understand its impact on gas production in unconventional wells
Wells require to be hydraulically stimulated to achieve commercial hydrocarbon rates from shales. Proppant needs to be pumped during the stimulation treatment to keep these artificially created pathways open for fluid flow. Aggressive drawdown on wells during the production stage commonly leads to …
-
Reservoir characterization of the Frontier Formation, Powell field, Powder River Basin WY
… Member of the Frontier Formation produces at Powell Field in the center of the Powder River Basin near the deep basin axis. Vertical well production originates from reworked, medium to coarse grained sandstones. This research integrates data and interpretations to characterize the Wall Creek …
-
Site Characteristics Associated with Conventional and Unconventional Petroleum Development in West Virginia
… surface disturbance between conventional (C) and unconventional (UC) wells in West Virginia. To understand the impacts of petroleum development in West Virginia, a total of 296 conventional wells and 206 unconventional wells were digitized for the purposes of this study. Using a combination of …
-
Development of Methane Emissions Model to Assess Fuel Recovery Potential at Gas Well Sites Using On Site Compression
… increased 85.5% since 2005 primarily due to the unconventional production methods of horizontal drilling and hydraulic fracturing. Natural gas used as a fuel has a lower greenhouse gas (GHG) footprint than coal and petroleum due to lower Carbon Dioxide (CO2) emissions when combusted. However, the …
-
Quantitative analysis of in-well distributed acoustic sensing measurements during hydraulic fracturing
… oil and gas industry for continuously monitoring wellbore activity over the lifetime of a well. The data used in this thesis was recorded from a permanently installed fiber optic cable in a treatment well during hydraulic fracturing operations. Our observations of harmonics, energy decay and …
-
Solid and Soluble Products of Engineered Water/Rock Interactions in Shale Reservoirs
… water, sand, and small amounts of chemicals into wells to introduce fractures in rock formations, which allows hydrocarbons to flow. However, with significant increases in production of oil and natural gas, concerns about potential environmental impacts resulting from excessive freshwater usage …
-
Interpretation of Nuclear Magnetic Resonance Measurements in Formations with Complex Pore Structure
… Magnetic Resonance (NMR) measurement as an unconventional well logging method, is among the most accurate approaches to estimate formation porosity. Petrophysicists use NMR to evaluate petrophysical properties such as pore size distribution, permeability, and fluid saturation, of various …
-
Application of the Ensemble Kalman Filter to Estimate Fracture Parameters in Unconventional Horizontal Wells by Downhole Temperature Measurements
… and expand on current technologies to optimize well productivity. Distributed temperature sensing has become a current and fairly inexpensive way to monitor performance in hydraulic fractured wells in real time by the aid of fiber optic. However, no applications have yet been attempted to …
-
Analysis on Combined Heat and Power, and Combined Heat and Power Hybrid Systems for Unconventional Drilling Operations
… a natural gas “boom” due to the development of unconventional shale plays, but well development is energy intensive. Operations use electric drilling rigs typically powered by either three high-horsepower diesel engines (HHPDE) or three dedicated natural gas engines (DNGE) and associated …
-
Integrative Approach For Improved Oil Recovery In Unconventional Reservoirs
The hydrocarbon production improvement in unconventional reservoir development hasbeen driven by the application of modern horizontal drilling and multi-stage hydraulic fracturing (MSHF) techniques, which makes it possible to access low porosity (<10%) and low permeability (<0.1 mD) formations. …
-
Predictions of Produced Water Quality and Recycled Water Optimization for Spatially-Distributed Wells in Point Pleasant Formation
… water management surrounding the booming of the unconventional oil and gas industry. Two main problems facing the oil and gas industry are the availability of water for well drilling and completion and disposal of the produced water. Unconventional well drilling and completion in the Utica shale …
Page 1 of 2