Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 96 for “"Uniform heating"”.
-
Uniform heating of thin ceramic slabs in a multimode microwave cavity
… term, are good models for describing microwave heating of thin ceramic slabs and cylinders in a multi mode, highly resonant cavity. A thin ceramic slab situated in a TEN03 rectangular cavity modeled in the small Biot number limit and a thin silicon wafer situated in a TM101 cylindrical cavity …
-
Numerical Investigation of the Cooling Performance of Microchannel Heat Sinks under Uniform and Non-Uniform Heating Conditions
… performance of microchannel heat sinks under non-uniform heating conditions and to compare to that under uniform heating conditions. Water with temperature-dependent properties is used. The temperature distribution, pressure drop, and total thermal resistance of the heat sink are selected as …
-
Heating of solid matter via laser generated electrons
This thesis reports on numerical studies of the heating of solid targets via laser generated fast electron beams, which allows for better understanding and optimisation of the generation of hot dense matter in a laboratory setting. The work is split into 3 main investigations which are summarised …
-
Thermal Management of Microscale Electronic Equipment Using Pulsating Heat Pipes
… to evaluate the performance of the PHP under non-uniform heating conditions. In electronic cooling, there are situations where non-uniform heating could occur. For example, a data centre houses a large number of processing units each running at different operating load, generating a different …
-
Investigation of Microwave Heating Behaviour of Packaged Potatoes
… cooked in microwave ovens tends to exhibit non-uniform heating. This research investigated the influence of oven- (magnetron fatigue, power distribution) and food/package-related factors (geometry and food arrangement) on temperature distribution during microwave heating. Real-time temperature …
-
Case studies of microwave applicators for industrial heating processes
… circular cylindrical applicators for industrial heating processes. Uniform heating is an important issue to be addressed first in most industrial microwave heating applications. The methodology used in our project is to find means to excite the exact design mode, which is the required condition …
-
Multiphysics Modeling of CO2-free Hydrogen Production via Microwave-driven Methane Pyrolysis in a Fluidized Bed Reactor
… limited microwave penetration depth and its non-uniform heating. First, particle-scale, full-wave simulations show that fluidized beds act as a collection of independently absorbing particles when the ratio of particle radius to skin depth falls within a specific range (0.5–5). This introduces a …
-
Field Simulation for the Microwave Heating of Thin Ceramic Fibers
… area of interest is the exploration of improved heating control through experiments and numerical modeling. Controlled heating may be used to counteract non-uniform heating and avoid destructive phenomena such as cracking and thermal runaway. Thermal runaway is a potential problem in materials …
-
A process simulation framework for continuous resistance welding of thermoplastic composites
… the model outputs revealed a high degree of non-uniform heating both across the width (edge effects) and length of the weld with significant pre-heating providing insight into complications for potential control schemes. A parametric study was conducted and found the electrical parameters to be …
-
3-D numerical simulations of conjugate heat transport in vacuum membrane distillation systems with applied membrane heating
… dimensions, and operating conditions to maximize uniform heating of the duct-plate interface. With this, we identified that decreasing channel width, decreasing inlet flow rate, and increasing plate thickness provided the best results of uniform heating. We then validate our solver against …
-
Intelligent Non-destructive Measurement and Evaluation Techniques for Aircraft Composites
… thermal contrast are strongly affected by non-uniform heating which due to the heat source alignment and specimen thickness variation. The proposed polynomial curve fitting and surface fitting techniques were applied to eliminate the non-uniform heating effect by subtracting the estimated …
-
Signal Strength and SNR Enhancement Techniques for Frequency Domain Photoacoustic Radar Imaging
… imposed thermal field has been developed. Uniform heating, microwave and ultrasound localized heating have been applied for PA image improvement. The microwave or ultrasound-induced elevated temperature was experimentally measured using thermocouples in ex-vivo bovine muscle. The measured …
-
Non-intrusive two-phase flow regime identification and transport characterization in microchannels subject to uniform and non-uniform heat input
… that provide high rates of heat transfer at a uniform heat sink temperature. Under two-phase flow conditions, the heat transfer and pressure drop are a function of the local flow regime. Development of sensors that detect local void fraction and flow regimes may enable better understanding of …
-
Thermal imaging of a selective laser sintering part bed surface
… The temperature was monitored during the heating process which showed slightly non-uniform heating of the part bed surface. Temperatures were also recorded while the laser was sintering each layer and the subsequent cooling of the entire machine following the build. By directly capturing …
-
Industrial Induction Heating - with a focus on multi coil solutions
Most types of materials and components use heating during the manufacturing process, with a large potential for cost and energy savings. Induction heating is the most energy efficient industrial heating technology for many applications, but so far technical limitations has delayed large scale …
-
INDUCTION ASSISTED THERMOGRAPHY FOR INSPECTION OF MICRO DEFECTS ON SHEET METALS
… for making automotive body panels. Induction heating as a source of excitation to elevate the temperatures of sheet metals for uniform heating and detect ability of the defect is the main objective of the study. Experiments are done on sheet metal samples with defects using excitation …
-
Study and simulation of the predictive proportional integral controller in comparison with proportional integral derivative controllers for a two-zone heater system
… chambers, had problems, which lead to non-uniform heating. After examining and listing the problems, it has been concluded that the Predictive Proportional Integral (PPI) mode of control would provide adequate solutions. In this project we have studied the heater systems, modeled them and …
-
The Effects of ultrasound transducer velocity on intramuscular tissue temperature across a treatment site
… tissue temperature increase, and whether heating was uniform across the treatment site. Thermocouples were inserted 2.5cm below the skin surface at the center, edge of the ERA, and the edge of the treatment site that was the size of two times the soundhead. Each subject received three …
-
Solid State Chemical Recycling of Polymer by Variable Frequency Microwave
… issue seen with fixed frequency microwave is non-uniform heating and arcing. The current study highlights the use of variable frequency microwave (VFM) heating to achieve rapid thermal depolymerization of polymer composites. A wide range of additives were investigated to select the best performers …
Page 1 of 5