Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Uplift Loading"”.
-
Standing seam roof system strength under uplift loading
… thesis is to verify the "base test method" for uplift loading of C- and Z-purlin supported, standing seam metal building roof systems. To achieve this end, eight sets of full-scale roof system tests were conducted. Each test set consisted of a single span base test and a three-span, multi-purlin …
-
Structural behaviour of cold-formed steel purlin-sheeting systems under uplift loading
… and channel-section purlins when subjected to uplift loading in purlin-sheeting systems. In pre-buckling, an analytical model is presented to describe the bending and twisting behaviour of partially restrained zed- and channel-section purlins when subjected to uplift loading. Formulae used to …
-
Further studies of uplift loaded standing seam roof systems
… loaded standing seam roof systems. However, for uplift loaded standing seam roof systems, the base test method is still being investigated. Previous tests conducted at Virginia Tech in 1990 and 1991 have led to the belief that scatter is inherent in the results of the base test method for uplift. …
-
Lateral Torsional Buckling of Wooden Beam-deck Systems
… boards. In the first model, focus is on wind uplift while in the second model, both gravity and uplift loading scenarios are investigated. In the first model, an energy method is adopted and the principle of stationary potential energy is evoked to formulate closed-form solutions, energy-based …
-
Uplift Behaviour of Circular Plate Anchors in Cohesionless Soils
… soils and subjected to vertical static uplift loading. A review of previous theoretical and experimental work provides a good insight into, and justification for, this study. A small-scale laboratory test model was constructed for experimentation purposes. A large circular steel tank was …
-
Fragility approach for performance-based design in fluid-structure interaction problems, Part I: Wind and wind turbines, Part II: Waves and elevated coastal structures
… coastal structures subjected to shear and uplift loading). The first problem type focuses on performance-based design of a wind turbine tower base connection subjected to wind loading using a fatigue limit state. A finite element model for wind turbines is subjected to nonlinear wind …
-
Insitu stresses and capacity of driven piles in sand
… are known to resist higher compression and uplift loading as compared to shallow foundations. The common factor in resisting the compression and the tensile loading is the friction, which takes place between the pile and the soil. Pile foundations can be categorized as bored and driven …
-
Experimental Investigation on Single Piles in Sand Subjected to Loading and Unloading
… side of the pile foundation and axial tension or uplift on the opposite side. The performance of piles depends largely on shaft resistance at the pile-soil interface, which controls settlement and load-bearing capacity under axial loads. Understanding shaft resistance behavior under compression, …
-
Direct Strength Method for the Flexural Design of Through-Fastened Metal Building Roof and Wall Systems under Wind Uplift or Suction
… of metal building roof and wall systems under uplift and suction wind loading is complicated because the laterally unbraced purlin and girt's free flange is compressed, and the cross-section rotates due to the shear flow. The objective of this thesis is to introduce a Direct Strength Method …
-
Plate Anchors in Sand Under Static and Cyclic Loads
… soil and subjected to vertical static or cyclic uplift loading. The experimental part of the investigation used model testing techniques, and details of the test rigs, sand, sand placement method and test procedures are given in Chapter 3. A total of thirty static tests were completed in dense …