Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 7 of 7 for “"Upsetting tests"”.

  1. The Phenomenon of Ductile Fracture

    … data, available in the published literature, of upsetting tests on certain steels in different heat treated conditions. Some upsetting tests have also been performed as part of the present study, and following earlier work conducted at McMaster University, specimens of different geometry were …

    mcmaster Repository record for The Phenomenon of Ductile Fracture (opens in a new tab)

  2. Plane-strain visioplasticity for dynamic and quasi-static deformation processes

    … that is fixed with respect to time. Plane-strain upsetting tests, conducted at a speed of 0.02 ft/min give results that agree closely with the well documented 'friction hill' type of normal stress distribution for quasi-static rates of strain. However, with the specimen deformed at a speed of 15.7 …

    ubc Repository record for Plane-strain visioplasticity for dynamic and quasi-static deformation processes (opens in a new tab) Download PDF for Plane-strain visioplasticity for dynamic and quasi-static deformation processes (opens in a new tab)

  3. The influence of strain rate and the effect of friction on the forging load in simple upsetting and closed die forging.

    … parameters involved when considering, simple upsetting, closed die forging and extrusion forging.</p> <p>A literature survey showed some of the empirical graphical and statistical methods of load prediction together with analytical methods of estimating load and energy. Investigations of the …

    sheffield-hallam Download file for The influence of strain rate and the effect of friction on the forging load in simple upsetting and closed die forging. (opens in a new tab)

  4. Investigation of microstructural evolution and recrystallisation mechanisms in 316L and 316Nb austenitic stainless steels during early stages of industrial open-die forging

    … experimental campaign involving small-scale hot upsetting tests and large-scale forging trials (i.e., cogging and upsetting) was designed to investigate material behaviour in the early stages of the ingot-to-billet conversion process. The experimental work was supported by finite element (FE) …

    strathclyde Repository record for Investigation of microstructural evolution and recrystallisation mechanisms in 316L and 316Nb austenitic stainless steels during early stages of industrial open-die forging (opens in a new tab)

  5. Pěchovací zkoušky

    Pěchovací, nebo-li tlakové zkoušky se ve strojírenské praxi využívají k zjišťování vlivu tlakového zatížení na vlastnostech materiálu. Zjišťují hodnoty deformačních odporů a tvařitelností zkoušených materiálů. Využitelnost pěchovacích zkoušek se ještě rozšiřuje s jednotlivými druhy jejich …

    brno-tech Repository record for Pěchovací zkoušky (opens in a new tab)

  6. Pěchovací zkouška a její význam pro praxi

    Studie byla zaměřena na ověření správnosti vyhodnocení pěchovacích zkoušek. Experimenty probíhaly na válcových vzorcích z oceli 16 231.3 opatřených pevným mazivem Delta 144. Srovnávaly se výstupní hodnoty, které byly zaznamenány klasickým způsobem pomocí liniového zapisovače a zesilovače na lisu …

    brno-tech Repository record for Pěchovací zkouška a její význam pro praxi (opens in a new tab)

  7. THE FORMATION MECHANISM OF α-PHASE DISPERSOIDS AND QUANTIFICATION OF FATIGUE CRACK INITIATION BY EXPERIMENTS AND THEORETICAL MODELING IN MODIFIED AA6061 (AL-MG-SI-CU) ALLOYS

    … ratio of the dispersoids in the alloy. Upsetting tests on two of these Mn and Cr-containing AA6061 (Al-Mg-Si-Cu) Al alloys with distinctive Mn contents were carried out at a speed of 15 mm s-1 under upsetting temperature of 450 ºC after casting and subsequent homogenization heat …

    uky-thes Repository record for THE FORMATION MECHANISM OF α-PHASE DISPERSOIDS AND QUANTIFICATION OF FATIGUE CRACK INITIATION BY EXPERIMENTS AND THEORETICAL MODELING IN MODIFIED AA6061 (AL-MG-SI-CU) ALLOYS (opens in a new tab)