Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"VARIABLE AMPLITUDE LOADING"”.
-
Fatigue Life Assessment of 30CrNiMo8HH Steel Under Variable Amplitude Loading
The actual service loading histories of most engineering components are characterized by variable amplitudes and are sometimes rather complicated. The goal of this study was to estimate the fatigue life of nickel-chromium-molybdenum 30CrNiMo8HH steel alloy under axial and pure torsion variable …
-
Effect of Variable Amplitude Loading on Fatigue Crack Growth Rate
… and structure that are subjected to dynamic loading conditions. Several models have been proposed for estimating crack growth rate da/dN under various conditions. The majority of work reported has focused on constant amplitude (CA) loading and some for variable amplitude (VA) loading. The …
-
Damage accumulation of bovine bone under chaotic and variable amplitude loading.
… experimental set-up was used to test chaotic loading conditions. The variable amplitude set-up was utilized to test variable amplitude loading conditions. Lastly, a four-point bend test was used to determine the baseline properties of the bone tissue. Scanning electron microscopy was employed …
-
Elastic-Plastic Fatigue Crack Growth Analysis under Variable Amplitude Loading Spectra
… cyclic stresses. In the case of cyclic constant amplitude loading the fatigue crack growth depends only on the crack, the component geometry and the applied loading. In the case of variable amplitude loading it also depends on the preceding cyclic loading history. Various types of load sequence …
-
On Fatigue Life Estimations of Riveted Details under Variable Amplitude Loading
… of riveted connections in railroad bridges under variable amplitude loading. Only the stress ranges with stress intensity factors larger than the fatigue threshold are assumed to produce crack growth. The analysis is developed using the variable amplitude stresses generated due to a traversing …
-
Fatigue Life Estimation and Material Evaluation Procedures for Structural Components Subjected to Variable Amplitude Loading
… tested under Gaussian narrow band random fatigue loading and an experimental study has been made of the local stresses at stress concentrations under prescribed sequences of variable amplitude loading. From the results of these tests and from relevant results obtained by other authors, the design …
-
Fatigue crack growth model for arbitrary planar cracks subjected to non-uniform stress field induced by variable amplitude loading
Engineering components that are subjected to cyclic loads frequently contain imperfections which can rationally be assessed using linear elastic fracture mechanics. Fatigue crack growth models make use of the stress intensity factor (SIF) range and the maximum SIF to describe the driving force for …
-
A variable amplitude multiaxial fatigue life prediction method
… the fatigue life of a component subjected to variable amplitude multiaxial loading has been developed. It is based upon an extension of the strain-life approach which achieved success in correlating the fatigue lives of components subjected to uniaxial variable amplitude loading. In addition, …
-
A study on effectiveness limitations of high-frequency mechanical impact
… high mean stresses and high peak loads during variable amplitude loading, which might relax these stresses, can limit the benefit from HFMI. Therefore, this work focuses on the effectiveness limitations of HFMI under different loading histories. The aim is to understand the influence of …
-
Fatigue Damage and Small Crack Growth During Biaxial Loading
… nature of fatigue damage under biaxial loading has been investigated. Experiments were performed on thin-wall tubular specimens of 1045 steel in tension, torsion, and combined tension-torsion loading. Two equivalent strain amplitudes, one in the high cycle fatigue (HCF) region and one in …
-
Fatigue growth of surface flaws in finite plates under two level block loading
… the growth of surface flaws subjected to simple variable amplitude loading. The experimental results were used to examine a method of mathematically modeling crack propagation behavior to enhance predictive capability. The mathematical modeling consisted of using the crack closure concept in …
-
Damage accumulation of bovine bone under variable amplitude loads.
… apparatus was constructed to conduct cyclic and variable amplitude tests on bovine bone specimens. Three distinct damage regimes were observed following fracture. Fractures appeared ductile from low cyclic amplitude (< 4,000 με), brittle, from high cyclic amplitude (> 9,000 με), and a combination …
-
The influence of mean stress in the design of bridges with HFMI-treated welds - Investigation of design models to the Eurocode
… carried out on structures subjected to constant amplitude loading. However, traffic loads on bridges can generate high and varying mean stresses, which are effects that are not covered by any design recommendations based on these earlier researches. A recent published report suggests a design …
-
Fatigue and damage tolerance assessment of aircraft structure under uncertainty
… from literature, including recorded defects, loadings, and material strength properties. The methodology is verified via formal conceptualization of the structures, which are demonstrated on an actual hydraulic accumulator and an engine nacelle inlet. The hydraulic accumulator is examined for …
-
Experimental analysis and numerical fatigue modeling for magnesium sheet metals
… structural components are subjected to cyclic loading. In the course of computer aided product development, a numerical prediction of the fatigue life under these conditions must be provided. For this reason, the mechanical properties of the considered material must be examined in detail. …
-
Fatigue in C/Si/Mn steels.
… the successful prediction of life for different, variable amplitude loading conditions. This requires extensive knowledge of both the service load environment and the response of metals to variable cyclic loads. This thesis presents the results of an investigation into the cyclic behaviour of …
-
Passive Pitch Control in Marine Hydrokinetic Turbine Blades
… under both instantaneous and long-term variable amplitude loading to better describe potential benefits while considering practical design and operational restrictions.
-
Mechanics of Fiber-Controlled Behavior in Polymeric Composite Materials
… to the model are made to include the effects of variable amplitude loading. These modifications are based upon the use of remaining strength as a damage metric and the definition of an equivalent generalized time. The model is initially validated using results from the literature. Also, …
-
Probabilistic prognostics of gears under variable loading
… downtime. Prognostics is especially useful in variable loading conditions, such as loads in wind turbine gearboxes. Literature suggests that accurate prediction of remaining useful life will improve reliability and reduce maintenance cost and that there is a need for a comprehensive framework …
-
Development of novel and efficient experimental arrangements for the validation of numerical simulations of large-scale aircraft structures
… simulations appropriate boundary conditions and loading schemes. Novel, cost- and time-efficient experimental installations are designed, manufactured, and validated by carrying out static, buckling, and fatigue tests on sub-scale and full-scale fuselage panels. A comprehensive array of …
Page 1 of 3