Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"Value Recovery"”.

  1. A survey on high-value recovery manufacturing in European sawmill industries

    … sawmills from producing custom-tailored, high-value lumber products that would give them a competitive edge on today's world markets. In European sawmills, on the other hand, value is often added to lumber not only through drying and planing but also, for instance, by strength grading of …

    ubc Repository record for A survey on high-value recovery manufacturing in European sawmill industries (opens in a new tab) Download PDF for A survey on high-value recovery manufacturing in European sawmill industries (opens in a new tab)

  2. Fluidised-bed flotation of coarse sulphide minerals: factors influencing value recovery

    … particle size range (10-150 μm). Coarse particle recovery is usually low in conventional flotation cells because of turbulence within the collection zones, which causes the particles to detach from bubbles. The main objective of this research was to increase the upper size limits of coarse …

    adelaide Repository record for Fluidised-bed flotation of coarse sulphide minerals: factors influencing value recovery (opens in a new tab)

  3. A comparison of twenty simulated strategies for achieving maximum parts value recovery in optimizing chop saw operations

    … to a cutting bill. The program determined i f value recovery per board foot (value/fbm) from a mill run could be increased by modifying the chop saw's priority settings which forced parts into a cutting solution. Twenty different cutting algorithms were employed of which 18 prioritized up to …

    ubc Repository record for A comparison of twenty simulated strategies for achieving maximum parts value recovery in optimizing chop saw operations (opens in a new tab) Download PDF for A comparison of twenty simulated strategies for achieving maximum parts value recovery in optimizing chop saw operations (opens in a new tab)

  4. Harvest utilization rates and strategies for enhanced value recovery during primary processing in the central appalachian region

    West Virginia has an abundant forest resource base that has underpinned portions of its economy for decades. These forests support a diverse primary and secondary forest products industry. A common thread that ensures the continued success of the forest industry, from the private landowners to the …

    wvu Repository record for Harvest utilization rates and strategies for enhanced value recovery during primary processing in the central appalachian region (opens in a new tab)

  5. The Effect of Uncertain End-of-Life Product Quality and Consumer Incentives on Partial Disassembly Sequencing in Value Recovery Operations

    … is motivated by the rising importance of value recovery and sustainability to manufacturers. Extended Producer Responsibility (EPR) and Product Stewardship (PS) policies are, globally, changing the way products are treated during their use-life and EoL. Each new policy places a greater …

    vt Repository record for The Effect of Uncertain End-of-Life Product Quality and Consumer Incentives on Partial Disassembly Sequencing in Value Recovery Operations (opens in a new tab)

  6. Evaluation of a direct processing system for converting no. 3 grade red oak logs into rough dimension parts

    … yields of green dimension parts and dollar value recovery from No.3 grade red oak logs by the direct processing system were estimated. A combination method of actual log sawing and simulated cutting was used to obtain the dimension yields. Two sawing patterns (live-sawing and …

    vt Repository record for Evaluation of a direct processing system for converting no. 3 grade red oak logs into rough dimension parts (opens in a new tab)

  7. An approach to automated product valuing for a real-time value optimization system

    … methodology is developed for estimating product values and using these values to decide how to cut the boards. The goal is to maximize the total value produced over a production run while minimizing inventory and ensuring that customer orders are met on time. The method uses a linear programming …

    ubc Repository record for An approach to automated product valuing for a real-time value optimization system (opens in a new tab) Download PDF for An approach to automated product valuing for a real-time value optimization system (opens in a new tab)

  8. Essay on the Persistence of Corporate Diversification Discount after Merger and Acquisition Transactions and Essay on the Capital Structure Properties of Real Estate Investment Trusts (REITs)

    … weak evidence that leverage, by itself, creates value. Nevertheless, I find strong evidence that during financial crisis debt-restricted REITs perform better than non-restricted ones. Also I find evidence that lends support to the pecking order story of leverage. I conclude that REITs managers …

    uno Repository record for Essay on the Persistence of Corporate Diversification Discount after Merger and Acquisition Transactions and Essay on the Capital Structure Properties of Real Estate Investment Trusts (REITs) (opens in a new tab)

  9. Economic analysis of recovering solid wood products from western hemlock pulp logs

    The purpose of this research was to quantify what value could be gained from cutting solid wood products from old-growth western hemlock (Tsuga heterophylla (Raf.) Sarg.) logs that are used to produce pulp in British Columbia. These logs represent a significant portion of the resource and …

    ubc Repository record for Economic analysis of recovering solid wood products from western hemlock pulp logs (opens in a new tab) Download PDF for Economic analysis of recovering solid wood products from western hemlock pulp logs (opens in a new tab)

  10. Development of a 3D log processing optimization system for small-scale sawmills to maximize profits and yields from central appalachian hardwoods

    … the effects of log sawing practices on lumber recovery evaluated. A total of 230 logs two species, red oak (Quercus rubra) and yellow-poplar (Liriodendron tulipifera), were measured in five typical hardwood sawmills in the state. Log characteristics such as length, diameter, sweep, taper, and …

    wvu Repository record for Development of a 3D log processing optimization system for small-scale sawmills to maximize profits and yields from central appalachian hardwoods (opens in a new tab)

  11. Optimization of edging and trimming operations for red oak lumber

    … The main objective was to evaluate how lumber value recovered by actual hardwood operations compare with the maximum value obtainable through the optimization of edging and trimming. An optimization procedure was developed involving the use of an iterative computer program for finding optimum …

    vt Repository record for Optimization of edging and trimming operations for red oak lumber (opens in a new tab)

  12. Circular Options for Jamaica’s Solid Waste Sector: A Systems Perspective

    … to achieve long-term success in the areas of value recovery and environmental protection. Participatory governance policies and mechanisms are found to be essential for sustainable solid waste management. These results can inform coming debates regarding private sector participation in …

    chalmers Repository record for Circular Options for Jamaica’s Solid Waste Sector: A Systems Perspective (opens in a new tab)

  13. Sustainable Cross-linked Polymers

    … a small fraction of this waste is collected for value recovery (e.g., recycling and incineration) while the majority ends up stagnating in landfills or polluting the environment. Certain important subsets of plastics, such as those with cross-linked molecular architectures, cannot be recycled at …

    umn Repository record for Sustainable Cross-linked Polymers (opens in a new tab)

  14. Economic Analysis for the Production of Solid, Microalgae-derived Biofuel

    … and water (15 wt.%), with an expected heating value of 18.6 GJ t-1, and in the second yielding a 3-part solid fuel of microalgal biomass (80 wt.%), water (15 wt.%), and limestone dust (5 wt.%), with an expected heating value of 17.4 GJ t-1. A preliminary economic analysis using published …

    queens Repository record for Economic Analysis for the Production of Solid, Microalgae-derived Biofuel (opens in a new tab)

  15. Λειτουργία και διαχείριση αντίστροφων εφοδιαστικών αλυσίδων στην ελληνική βιομηχανία

    … of affairs and future trends in the product recovery domain as perceived by Greek industry. The methodology employed to achieve this objective was to conduct two extensive questionnaire-based surveys about product recovery activities (PRA) in the manufacturing sector, the first in 2004 and …

    greece Repository record for Λειτουργία και διαχείριση αντίστροφων εφοδιαστικών αλυσίδων στην ελληνική βιομηχανία (opens in a new tab)

  16. Structural performance of box based cross laminated timber system used in floor applications

    … and reconstitution is employed to maximize value recovery from the material. Cross Laminated Timber (CLT), which is produced in modular form and can be utilized as part of a structural system for floor, wall or roof elements, is considered as an excellent application of the concept. CLT …

    ubc Repository record for Structural performance of box based cross laminated timber system used in floor applications (opens in a new tab) Download PDF for Structural performance of box based cross laminated timber system used in floor applications (opens in a new tab)

  17. Multi-scale utilization strategies of residual biomass for decarbonization in Canada

    … by 83%, supporting its role in maximizing value recovery and decarbonization from limited feedstock. Overall, this dissertation develops multi-scale bioeconomy strategies to allocate and intensify residual biomass utilization to support Canada’s decarbonization targets.

    ubc Repository record for Multi-scale utilization strategies of residual biomass for decarbonization in Canada (opens in a new tab) Download PDF for Multi-scale utilization strategies of residual biomass for decarbonization in Canada (opens in a new tab)

  18. Using x-ray scanned reconstructed logs to predict knot characteristics and log value

    … and sites (including knots) on the lumber and value recovery in Coastal and Interior sawmills under normal, optimistic, and pessimistic economic cycles. The sawmilling simulations revealed that the Coastal mill produced a lower lumber volume but a higher value due to the type of products …

    ubc Repository record for Using x-ray scanned reconstructed logs to predict knot characteristics and log value (opens in a new tab) Download PDF for Using x-ray scanned reconstructed logs to predict knot characteristics and log value (opens in a new tab)

  19. Adaptive Color Correlation of Knots in Wood Images and Weighted-value Product Selection Methods in a Machine Vision System

    … costs, more efficient methods of maximizing the recovery of clear wood in every board are sought. Optimization, in the present context, is a broad term for selecting products that are made from wood boards so the value of products produced is maximized for a given production requirement. Wood …

    portland-state Repository record for Adaptive Color Correlation of Knots in Wood Images and Weighted-value Product Selection Methods in a Machine Vision System (opens in a new tab)

Page 1 of 2