Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2008 for “"Valves"”.
-
Investigation of spring valves
This thesis presents a study of spring valves with the ultimate aim of using them as high pressure hydraulic flow-control valves for agricultural applications. A closed helical coil spring, when pressurized, will provide a controlled flow between the coils when extended or laterally deflected a …
-
Thermionic valves in radio
Thesis (M.A.)--Boston University, 1936. This item was digitized by the Internet Archive.
-
Oil stiction in automatic compressor valves
… oil stiction effects in automatic compressor valves. The experimental programme involved the testing of disc valves in a compressor in which the working fluid could be varied and the oil circulation controlled. The main purpose of the experiment was to measure, in as direct a manner as …
-
Feasibility of miniature polypyrrole actuated valves
… mechanisms that could be used to create these valves. There are a number of challenges in using polypyrrole in a commercially viable valve; it must be able to withstand large temperature variations, have a high strain (to minimize mechanical amplification), have high work density (to minimize …
-
Fault simulator for proportional solenoid valves
Proportional Solenoid Valves (PSV) have been successfully used in the hydraulic industry for many years due to the benefits associated with higher accuracy compared to on/off solenoid valves, and the robustness and cost compared to servo valves. Because the PSV plays an important role in the …
-
Aerating Butterfly Valves to Suppress Cavitation
Proper aeration of cavitating hydraulic equipment can greatly reduce cavitation intensity, noise, and damage. This thesis quantifies the benefit, in terms of damage and noise, from aerating six inch butterfly valve. The incipient damage level of cavitation was obtained for both aerated and …
-
Platelet Activation in Artificial Heart Valves
… the thrombogenic performance of prosthetic heart valves. This aim is achieved by 1) developing a parallel dynamic overset grid and combining it with the curvilinear immersed boundary (overset-CURVIB) method to reduce the computational cost; and 2) developing a framework for evaluating the …
-
Computational Modeling of Transcatheter Aortic Valves
… and intermediate-risk patients, surgical aortic valves replacement (SAVR) was still considered as the gold standard for low-risk patients. TAVR could potentially be applied to lower-risk younger patients if the indications can be safely expanded to the patients and transcatheter aortic valve …
-
Transport Properties of Lateral Spin Valves
… and Vanadium/silver/Vanadium spin valves in a lateral geometry. The presence of a downturn in the spin-signal of these lateral spin valves at low temperatures, below 30 K, can be avoided by depositing the Ag at a faster rate. This will promote a better microstructure that seems to …
-
Current Density Limitations of Spin-Valves
… when they fail. A fundamental limitation of spin-valves is the current density they can sustain, and the magnitude of the damage that may result if these devices are operated at high current levels for a sustained time period. Prediction of these parameters is a very difficult prospect. As with …
-
Spin Transport in Lateral Spin Valves
… specifically for the fabrication of lateral spin valves (LSVs). The thesis then proceeds to answer two important questions: what causes the loss of spin accumulation at low temperatures seen in LSVs? and how do spin currents interact in multi-terminal circuits? Through a double-dose electron beam …
-
Fabrication and characterization of lateral spin valves
… have to be resolved. Most work done on spin valves focuses on the conventional vertical heterostructure. For this project, we have fabricated six-terminal lateral spin valve devices in order to study effects such as spin injection, spin accumulation and spin detection. These lateral …
-
Probabilistic Life Cycle Assessment of Safety Valves
… assessing the life cycle performance of safety valves used in the nuclear piping system. The life cycle performance is quantified in terms of reliability and life cycle cost in a given operating interval of the plant. A key input to the probabilistic lifecycle analysis is the lifetime …
-
Factors effecting calcification of bioprosthetic heart valves
… of glutaraldehyde treated bioprosthetic heart valves. In this study, we compared calcification of bioprostheses of the No-ReactTM and the conventional glutaraldehyde treated pericardium by both in-vivo and in-vitro methods, and to further delineate the role of the host's inflammatory response …
-
Fluid Dynamics Characterization of Transcatheter Aortic Valves
… compare to SAVR. Currently, transcatheter aortic valves (TAVs) have limited clinical data in term of fluid dynamics performance of TAVs, in contrast to surgical aortic valves (SAVs). Due to limitations associated with devices that are used to evaluate the performance of TAVs in patients such as …
Page 1 of 101