Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 634 for “"Vane"”.
-
Cooled Vane Heat Transfer
… with application to a cooled turbine inlet guide vane was studied with the purpose of developing and validating a model for the thermal load of the vane. As a start, a 2D model of a single slot jet was created and the predicted data compared to experimental data. This comparison showed that the …
-
Rotating Vane Flow Measurement Techniques
… into the development and performance of vane flowmeter methods for the measurement of air and gas flow. To improve on existing rotating vane anemometer performance, a capacitance change vane sensing technique is investigated. In conjunction with Ower's dynamic equations steady state and …
-
Roller vane pump: volumetric efficiency improvement
Confidential.
-
Vane shear tests in Lake Agassiz clays
A great deal of testing with vane shear equipment in homogeneous clay soils has been reported throughout the world. This thesis deals with the results of vane shear tests in the varved clay deposits of glacial Lake Agassiz in Manitoba. The soil shearing resistance determined by a vane was compared, …
-
The triaxial vane apparatus with stress control.
… two fold. The first stage was to develop a Tri Vane Apparatus. The Tri Vane Apparatus uses a miniature vane incorporated into a triaxial cell in order to study the use of the vane in different soils as well as allowing the effects of different vane parameters, such as rotation rate and vane …
-
Investigation Into Flutter of Complex Vane Packs
… in different distortion patterns, the StreamVane and ScreenVane systems have been developed. A StreamVane consists of a complex vane pack that is custom designed for each distortion profile and the ScreenVane combines the StreamVane with a pressure distortion screen for testing engines under …
-
Characteristics of swirling flames issuing from vane swirlers
… of Glasgow on swirling jets issuing from vane swirlers. A test-rig suitable for investigations of combustion systems was designed. The vane swirlers used for the investigations were to the same design as those used by Mathur (5) for investigating cold swirling jets. The measuring …
-
Erosion effects on TVC vane heat transfer characteristics
… characteristics on thrust vector control vanes exposed to aluminized propellant exhaust flows. This was accomplished using an inverse heat transfer parameter identification of quaner scale models. The model is based on a four node lumped parameter system with two heat energy inputs. The …
-
Development of vane testing equipment for foundation investigations
… of previous investigations, by others, of vane testing equipment, and (2) utilizing the results of previous Investigations, to design and manufacture a light-weight, compact, easily operated vane testing device for quickly obtaining the shear strength of soils in situ, and with this …
-
Vane sensor system in small strain oscillatory testing
… was developed to allow the use of a 4-bladed vane sensor in small strain oscillatory testing. It was assumed that the vane sensor acted as a bob with an acting radius (Rv) different from the actual radius of vane (0.02005 m). To solve for Rv, the complex modulus (G*, Pa) obtained using a …
-
Fluid Borne Noise in Vane Type Hydraulic Transmission Systems
A computer model was developed for a radial vane pump, possessing a new configuration with twin abutments and retractable vanes. The model computes the flow and pressure histories of the segment and port, based on compressibility, leakage and geometry effects. The equation describing the general …
-
Development and aerothermal investigation of integrated combustor vane concept
… investigation of the integrated combustor vane concept. In this novel concept, first introduced in 2010, the conventional nozzle guide vanes (NGVs) are removed and flow turning is achieved by vanes that extend the combustor walls. The concept was developed using the inhouse CFD code TBLOCK. …
-
High pressure nozzle guide vane cooling system flow characteristics
… challenging high pressure turbine nozzle guide vane (NGV) working conditions. The capability to reproduce representative boundary conditions in a rig at the combustor-turbine interaction plane is a key feature when testing NGVs in an engine-representative environment. A large scale linear …
-
Novel cooling design for blade or vane trailing edges
… edge of the high pressure turbine blade and vane presents significant challenges to the turbine cooling engineer. This section endures very high temperature and mechanical stresses but aerodynamic efficiency requirements dictate that it must be tapered to the end with minimal thickness, …
-
Aerodynamics and modelling of vane-swirled flames in furnaces
… of generating a swirling jet is to employ a vane swirler. In this work the aerodynamics of vane-swirled premixed town gas-air flames are investigated in two furnaces, using the same swirlers. Variables investigated include the swirler vane angle, geometry, degree of confinement, Reynolds …
-
Submerged vane performance in strongly curved narrow channel bends.
Submerged vanes are thin flow-training structures that protrude above the channel bed to a height of approximately 0.2 to 0.5 times the flow depth. They have lengths of 1 to 4 times their height, and are typically angled between 5 and 30 degrees to the free-stream flow direction (counterclockwise, …
-
Shear strength of coal combustion product by vane shear
… of a coal combustion product (CCP) using the vane shear test. The CCP was obtained from a CCP evaporation pond in the Eastern United States, and consisted primarily of silt-sized particles. A series of small-scale vane shear (diameter = 12.5 mm and height = 25 mm) and large-scale vane shear …
Page 1 of 32