Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Variable Camber"”.

  1. Design and Analysis of a Multi-Section Variable Camber Wing

    … aerodynamic characteristics of a multi-section, variable camber wing were investigated. The model used in this research had a 1-ft chord and a 1-ft wingspan, with the ribs divided into 6 sections. Two pneumatic actuators located at the main spar were used to morph the wing through mechanical …

    maryland Repository record for Design and Analysis of a Multi-Section Variable Camber Wing (opens in a new tab)

  2. The development of a reversible and finitely variable camber windsurf fin

    … potential of the device. The benefits of using camber in the design of lifting sections for high lift and low drag are well known. Traditional variable camber lifting surfaces utilise leading and trailing edge flap technologies to vary the geometry (camber) of the cross-section. However, this …

    bournemouth Download PDF for The development of a reversible and finitely variable camber windsurf fin (opens in a new tab)

  3. Development of a Variable Camber Compliant Aircraft Tail using Structural Optimization

    … airplane and the design and integration of a variable camber compliant tail. The morphing airplane was designed and manufactured to study the benefits of large planform changes and flight control morphing. Morphing capabilities of each wing consist of 8 in. wing extension and contraction, 40° …

    vt Repository record for Development of a Variable Camber Compliant Aircraft Tail using Structural Optimization (opens in a new tab)

  4. Design and Construction of a Wind Tunnel Model with Active Variable Camber Continuous Trailing Edge Flap for Aeroelastic “In-Flight” Shape Optimization Tests

    … tests of real-time optimization-based continuous camber and twist shaping concepts for the SSCI-DIRECT project. The model has twelve independently controlled trailing edge control surfaces that can be actively driven while testing is underway. Development of the model follows the successful …

    washington Repository record for Design and Construction of a Wind Tunnel Model with Active Variable Camber Continuous Trailing Edge Flap for Aeroelastic “In-Flight” Shape Optimization Tests (opens in a new tab)

  5. Aerodynamic and Electromechanical Design, Modeling and Implementation Of Piezocomposite Airfoils

    … material are proposed to form two types of variable-camber aerodynamic surfaces. The first concept, a simply-supported thin bimorph airfoil, can take advantage of aerodynamic loads to reduce control input moments and increase control effectiveness. The structural boundary conditions of the …

    vt Repository record for Aerodynamic and Electromechanical Design, Modeling and Implementation Of Piezocomposite Airfoils (opens in a new tab)

  6. Partially separated flow around masts and sails

    <p>A variable camber aerofoil and a miniature boundary layer traverse unit have been designed and built to investigate the nature of flow around two-dimensional, highly cambered, sail-like aerofoil sections with circular masts. Data has been obtained in the form of static pressure distributions and …

    soton Download PDF for Partially separated flow around masts and sails (opens in a new tab)

  7. Modelling, sensing, and control design of morphing wing structures

    … optimal, and adaptive controller design for a Variable Camber Continuous Trailing Edge Flap (VCCTEF) aircraft, the NASA Generic Transport Model (GTM), targeting the goal of minimizing the drag coefficient in cruise condition. To validate and generalize the developed controller design, a novel …

    wichita-thes Repository record for Modelling, sensing, and control design of morphing wing structures (opens in a new tab)

  8. Evaluation of innovative concepts for semi-active and active rotorcraft control

    … in rotorcraft blade design have also focused on variable-camber airfoils, particularly concepts involving “truss-core” configurations. One promising concept is the use of hexagonal chiral lattice structures in continuously deformable helicopter blades. The static behavior of passive and active …

    gatech Repository record for Evaluation of innovative concepts for semi-active and active rotorcraft control (opens in a new tab)

  9. Feasibility of morphing aircraft propeller blades

    … of this study is to assess the feasibility of variable geometry aircraft propeller blades, the main focus being on the aerodynamic performance. A number of objectives are established to reach this goal, with the development of an aerodynamic model and a blade optimization scheme being among …

    wichita-thes Repository record for Feasibility of morphing aircraft propeller blades (opens in a new tab)

  10. Control system design for morphing aircraft

    … concept (ESAC) with highly flexible wings and variable camber capability, and multiple distributed flaps and slats as control surfaces. For this aircraft, three design approaches are explored. The first one is a state feedback optimal control, and then a static output feedback optimal control …

    wichita-thes Repository record for Control system design for morphing aircraft (opens in a new tab)

  11. Aeroelastic Stability Analysis of a Wing with a Variable Cant Angle Winglet

    … more versatile. For example, they include variable wing sweep, folding wing tips, and variable camber. However, aeroelasticity has played in important role in these developments. Thus, this work focuses on the aeroelastic analysis and understanding of the fundamental physics of the flutter …

    maryland Repository record for Aeroelastic Stability Analysis of a Wing with a Variable Cant Angle Winglet (opens in a new tab)

  12. Optimum wing shaping and gust load alleviation of highly flexible aircraft with finite actuations

    … One example of this technology is NASA's Variable Camber Continuous Trailing Edge Flap (VCCTEF) which creates a trailing edge for an aircraft wing which can change the camber of individual sections without creating any discontinuities which generate drag. This application deals with small …

    alabama Repository record for Optimum wing shaping and gust load alleviation of highly flexible aircraft with finite actuations (opens in a new tab)

  13. Vortex flows around morphing foils: reshape yourself to effect a change

    … unsteady flows around foils undergoing large camber variations, as a first step towards exploring the capability of camber morphing to alter vortex characteristics, like formation time and strength. Discrete-vortex methods have risen as one of the most suitable numerical tools to establish a …

    glasgow Repository record for Vortex flows around morphing foils: reshape yourself to effect a change (opens in a new tab) Download PDF for Vortex flows around morphing foils: reshape yourself to effect a change (opens in a new tab)

  14. Tire Footprint Analysis Based on Image Processing Techniques

    … this test rig allows providing the tire with variable camber angles and slip ratios. For the rolling tire, a digital camera GoPro has been used under a glass panel to record the tread pattern in detail when the tire passes over it during the test, to represent the footprint for a high slip …

    vt Repository record for Tire Footprint Analysis Based on Image Processing Techniques (opens in a new tab)