Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 110 for “"Variable Geometry"”.

  1. Mobility analysis of variable geometry trusses

    … in terms of increased strength and rigidity. Variable geometry trusses (VGTs) are a special class of parallel trusses. Literature on VGTs has covered many interesting problems, yet there has been no conscious effort to formulate a definition for a VGT. The major emphasis of this thesis is …

    vt Repository record for Mobility analysis of variable geometry trusses (opens in a new tab)

  2. Aerodynamics of variable geometry wing/body combinations

    … of the aerodynamic characteristics of variable geometry of an aircraft model is presented. Aerodynamically, the model is tested-for a sweep range of 0°,12.5° 32.5°, and 52.5° and incidence range of 0° to 200° in 4° intervals. All the pressure distributions on the wing, glove, and body …

    salford Download PDF for Aerodynamics of variable geometry wing/body combinations (opens in a new tab)

  3. Design, construction and operation of a variable geometry manipulator

    … operation and performance evaluation of a variable geometry manipulator used in space as well as ground based operations. The system is composed of a mobile base supporting two modules connected in a chain topology. Each module consists of two links: one free to slew while the other is …

    ubc Repository record for Design, construction and operation of a variable geometry manipulator (opens in a new tab) Download PDF for Design, construction and operation of a variable geometry manipulator (opens in a new tab)

  4. Motion Model for a Variable Geometry Truss (VGT) Manipulator

    … and examining countless alternatives, the Variable Geometry Truss (VGT) percolated through as being the most promising model with which to start. Although it is probably not the best analogy to the tentacle, its motions are similar, and even though complex, it is a more structured and …

    marquette Repository record for Motion Model for a Variable Geometry Truss (VGT) Manipulator (opens in a new tab)

  5. Grid Generation and CFD Analysis of Variable Geometry Screw Machines

    … and numerical methods for predicting the flow in variable geometry, positive displacement screw machines. It has been shown, from a review of available literature, that the two main approaches available to generate deforming grids for the CFD analysis of 3D transient flow in screw machines are …

    city-london Download PDF for Grid Generation and CFD Analysis of Variable Geometry Screw Machines (opens in a new tab)

  6. Kinematic analysis and animation of a variable geometry truss robot

    … a parallel, closed-loop manipulator known as the Variable Geometry Truss or VGT for short. Widely recognized as adaptive or collapsing structures for space and military applications, VGTs have not received due consideration as robotic manipulators. VGTs undoubtedly represent an important sector of …

    vt Repository record for Kinematic analysis and animation of a variable geometry truss robot (opens in a new tab)

  7. DEVELOPMENT OF ADVANCED NUMERICAL MODELS FOR VARIABLE GEOMETRY MICROCHANNEL HEAT EXCHANGERS

    … be further improved with the limited number of geometry related design variables currently used. Freeing up the current MCHX uniform geometry restriction would lead to novel designs that address various design and applications objectives, such as performance enhancement, material reduction and …

    maryland Repository record for DEVELOPMENT OF ADVANCED NUMERICAL MODELS FOR VARIABLE GEOMETRY MICROCHANNEL HEAT EXCHANGERS (opens in a new tab)

  8. Design and construction of a double-octahedral variable geometry truss manipulator

    … deals with the design and construction of a variable geometry truss (VGT) of the double-octahedral (pyramid-pyramid) geometry. The truss is expected to be the focus of several experimental research projects. In this thesis, a kinematic model is formulated, and the forward and inverse …

    vt Repository record for Design and construction of a double-octahedral variable geometry truss manipulator (opens in a new tab)

  9. Variable Geometry Scramjet Combustor Cavity Multi-Dimensional Treatise for Performance Analysis

    … Scramjet engines, the results showed that the variable geometry matched or outperformed the baseline HiFiRE geometry. The analysis revealed points of Mach and altitude where certain combustor volumes demonstrated greater performance. This greater performance is only gained by the ability to …

    vt Repository record for Variable Geometry Scramjet Combustor Cavity Multi-Dimensional Treatise for Performance Analysis (opens in a new tab)

  10. Shape control of high degree-of-freedom Variable Geometry Truss manipulators

    Variable Geometry Trusses (VGT’s) can be used as the fundamental building blocks in constructing long-chain, high degree-of-freedom manipulators. This thesis focuses on the kinematics of two such manipulators. It also illustrates how the concept of shape control can be applied to simplify the …

    vt Repository record for Shape control of high degree-of-freedom Variable Geometry Truss manipulators (opens in a new tab)

  11. Design of a robotic manipulator using variable geometry trusses as joints

    … workspace restrictions. The introduction of Variable Geometry Trusses (VGT’s) represents an opportunity to overcome this limitation. The lack of stiffness in many serial manipulators is primarily due to compliance at the joints. The disadvantage of the series connected device include …

    vt Repository record for Design of a robotic manipulator using variable geometry trusses as joints (opens in a new tab)

  12. Design, fabrication and characterization of nonometer-scale variable-geometry MIM tunnel junctions

    There is growing interest in a phenomenon known as magnetoresistance in such applications as high-density hard disk drives and magnetic read-heads. The structure used in these applications is a tunnel junction containing ferromagnetic materials and an insulating barrier tunnel oxide. The turmel …

    ttu Repository record for Design, fabrication and characterization of nonometer-scale variable-geometry MIM tunnel junctions (opens in a new tab)

  13. The solution of variable-geometry truss problems using new homotopy continuation methods

    A VGT or Variable-Geometry Truss can be thought of as a statically determinate truss that has been modified to contain some number of variable length members. These extensible members allow the truss to vary its configuration in a controlled manner. VGTs are often symmetric. constructed of …

    vt Repository record for The solution of variable-geometry truss problems using new homotopy continuation methods (opens in a new tab)

  14. Aerodynamic Analysis of Variable Geometry Raked Wingtips for Mid-Range Transonic Transport Aircraft

    … designs for its next generation of airliners, a variable geometry raked wingtip novel control effector (VGRWT/NCE) was studied to determine the aerodynamic performance benefits over an untreated wingtip. The Boeing SUGAR design employing a truss-braced wing was selected as the baseline. Vortex …

    vt Repository record for Aerodynamic Analysis of Variable Geometry Raked Wingtips for Mid-Range Transonic Transport Aircraft (opens in a new tab)

  15. An Investigation of a Variable Geometry Diffuser for FTU's Four Inch Supersonic Wind Tunnel

    … to improve FTU's wind tunnel along these lines. Variable area diffusers whose throats can be closed after flow has been established were of interest in this report because of their higher pressure recovery. The maximum run time of FTU's wind tunnel is limited by the overall operating pressure …

    ucf Repository record for An Investigation of a Variable Geometry Diffuser for FTU's Four Inch Supersonic Wind Tunnel (opens in a new tab)

  16. A study of a novel modular variable geometry frame arranged as a robotic surface

    The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary …

    unlv Repository record for A study of a novel modular variable geometry frame arranged as a robotic surface (opens in a new tab) Download PDF for A study of a novel modular variable geometry frame arranged as a robotic surface (opens in a new tab)

  17. Computational Analysis of Transient Unstart/Restart Characteristics in a Variable Geometry, High-Speed Inlet

    … characteristics of a high-speed inlet with a variable-geometry, rotating cowl. The inlet analyzed is a mixed compression inlet with a compression ramp, sidewalls and a rotating cowl. The analysis is conducted at nominally Mach 4.0 wind tunnel conditions. Advanced Computational Fluid Dynamics …

    vt Repository record for Computational Analysis of Transient Unstart/Restart Characteristics in a Variable Geometry, High-Speed Inlet (opens in a new tab)

Page 1 of 6