Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 111 for “"Vehicle stability"”.

  1. A Model-free Approach to Vehicle Stability Control

    … existing controllers, instead of comparing the vehicle response to that of an idealized model it makes decisions based solely upon the measured response of the car. Simulations were conducted (using CarSim) of various vehicles executing the skid pad and the double lane change tests to …

    clemson Repository record for A Model-free Approach to Vehicle Stability Control (opens in a new tab)

  2. Reconfigurable Integrated Vehicle Stability Control Using Optimal Control Techniques

    The motivation for the development of vehicle stability control systems comes from the fact that vehicle dynamic behavior in unfavorable driving conditions such as low road-tire adhesion and high speed differs greatly from its nominal behavior. Due to this unexpected behavior, a driver may not be …

    waterloo Repository record for Reconfigurable Integrated Vehicle Stability Control Using Optimal Control Techniques (opens in a new tab)

  3. Vehicle Stability Control Considering the Driver-in-the-Loop

    … framework is essential for a full analysis of vehicle stability systems. In theory, knowing the vehicle’s desired path (driver’s intention), the problem is reduced to a standard control system in which one can use different methods to produce a (sub) optimal solution. In practice, however, …

    waterloo Repository record for Vehicle Stability Control Considering the Driver-in-the-Loop (opens in a new tab)

  4. INDEPENDENT TORQUE DISTRIBUTION MANAGEMENT SYSTEMS FOR VEHICLE STABILITY CONTROL

    Vehicle Dynamics Control (VDC) systems, also called Electronic Stability Control (ESC) systems, are active on-board safety systems intended to stabilize the dynamics of vehicle lateral motion. In so doing, these systems reduce the possibility of the driver's loss of control of the vehicle in some …

    clemson Repository record for INDEPENDENT TORQUE DISTRIBUTION MANAGEMENT SYSTEMS FOR VEHICLE STABILITY CONTROL (opens in a new tab)

  5. Open loop aspects of two-wheeled vehicle stability characteristics

    … While the literature regarding two wheeled vehicle behavior is extensive, to this day, no consensus exits in the literature as to what principles govern the steering and stability characteristics of two wheeled vehicles. This is due in part to the complex nature of the dynamic equations of …

    uiuc Repository record for Open loop aspects of two-wheeled vehicle stability characteristics (opens in a new tab)

  6. Integrated Vehicle Stability and Power Management Controls for Electric Vehicles

    An integrated vehicle controller is presented for electric vehicles using independently driven wheel motors. This topology takes an optimal control approach to enhancing a vehicle's performance, stability, and energy consumption metrics simultaneously in a unified software structure. The logical …

    waterloo Repository record for Integrated Vehicle Stability and Power Management Controls for Electric Vehicles (opens in a new tab)

  7. Optimal Vehicle Stability Control with Driver Input and Bounded Uncertainties

    For decades vehicle control has been extensively studied to investigate and improve vehicle stability and performance. Such controllers are designed to improve driving safety while the driver is still in control of the vehicle. It is known that human drivers are capable to learn and adapt to their …

    vt Repository record for Optimal Vehicle Stability Control with Driver Input and Bounded Uncertainties (opens in a new tab)

  8. Integrated Vehicle Stability Control and Power Distribution Using Model Predictive Control

    … In these conditions, the behavior of the vehicle is different than the linear response during everyday driving. Even experienced drivers usually lose control of the vehicle in such situations and that often results in a car accident. Stability control systems have been developed over the …

    waterloo Repository record for Integrated Vehicle Stability Control and Power Distribution Using Model Predictive Control (opens in a new tab)

  9. Estimation of Road Bank and Slope Angle for Enhanced Vehicle Stability Control

    … provide an estimation of the bank angle when the vehicle is in a steady state mode. Limited information and approaches for estimating the contribution from the road bank and slope angle to the lateral and longitudinal acceleration have been found in the literature. Neglecting these contributions …

    chalmers Repository record for Estimation of Road Bank and Slope Angle for Enhanced Vehicle Stability Control (opens in a new tab)

  10. Effect of Using Machine Learning to Improve Active Suspension Control for Vehicle Stability

    … model was developed to represent a full-body vehicle, and an AI was used to analyze road vibration noise. The model was adapted to allow the AI to select from multiple control signals based on the AI’s analysis of road vibration noise. The objective of the study was to demonstrate whether an …

    gvsu Repository record for Effect of Using Machine Learning to Improve Active Suspension Control for Vehicle Stability (opens in a new tab)

  11. Electric Vehicle Blended Braking maximizing energy recovery while maintaining vehicle stability and maneuverability.

    … as ‘EVBB project’ which stands for; ‘Electric Vehicle Blended Braking’. A blended brake control merges a regenerative brake system with a friction brake system. The aim is to get a better understanding regarding to what extent a regenerative brake system is capable of recovering energy and how …

    chalmers Repository record for Electric Vehicle Blended Braking maximizing energy recovery while maintaining vehicle stability and maneuverability. (opens in a new tab)

  12. Improving heavy duty vehicle stability during split-μ braking situations with rear axle steering

    … use of rear axle steering (RAS) to improve the stability of heavy-duty vehicles during split-μ braking scenarios. Split-μ braking, where the friction coefficient differs between the left and right wheel paths, generates asymmetric longitudinal forces and induces yaw moments that can compromise …

    chalmers Repository record for Improving heavy duty vehicle stability during split-μ braking situations with rear axle steering (opens in a new tab)

  13. Intelligent Tire Based Tire Force Characterization and its Application in Vehicle Stability and Performance

    … defining both the safety and performance of the vehicle. The interaction between the tire and the road surface determines the vehicle's ability to accelerate, decelerate and steer. Having information about this interaction in real-time can be very valuable for the on-board advanced active safety …

    vt Repository record for Intelligent Tire Based Tire Force Characterization and its Application in Vehicle Stability and Performance (opens in a new tab)

  14. Estimation of vertical load on a tire from contact patch length and its use in vehicle stability control

    … a suitable control input to maintain the yaw stability of a moving vehicle. A two degree of freedom bicycle model was used for developing the control strategy. A linear quadratic regulator (LQR) was designed for the purpose of controlling the yaw rate and maintaining vehicle stability.

    vt Repository record for Estimation of vertical load on a tire from contact patch length and its use in vehicle stability control (opens in a new tab)

  15. Stability Control of Triple Trailer Vehicles

    While vehicle stability control is a well-established technology in the passenger car realm, it is still an area of active research for commercial vehicles as indicated by the recent notice of proposed rulemaking on commercial vehicle stability by the National Highway Traffic Safety Administration …

    clemson Repository record for Stability Control of Triple Trailer Vehicles (opens in a new tab)

Page 1 of 6