Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 98 for “"Vibration tests"”.

  1. Testing of the suspended vehicle system scale model

    … deflections and an accelerometer to detect vibrational frequencies. The output of ten LVDTs was recorded on either a Sanborn strip chart recorder or a magnetic type recorder. The accelerometer supplied a signal to a real-time frequency analyzer. The testing program consisted of both static …

    vt Repository record for Testing of the suspended vehicle system scale model (opens in a new tab)

  2. Long-term Functionality of Vacuum Insulation Panels (VIP) Subjected to Simulated Random Vibrations

    … the long-term performance of VIPs due to truck vibrations during transit. This paper investigates this gap by presenting results from a laboratory test program involving unaged and aged VIP specimens (300 mm x 300 mm x 25 mm) with two types of core materials, fumed silica and fiberglass. The VIP …

    uvic Repository record for Long-term Functionality of Vacuum Insulation Panels (VIP) Subjected to Simulated Random Vibrations (opens in a new tab)

  3. Flight operations for higher harmonic control research.

    … helicopters. Recognizing the need to reduce vibrations caused by aerodynamic loads on the rotor system, a Higher Harmonic Control (HHC) research effort has begun. The test vehicle of the HHC system is a Remotely Piloted Helicopter (RPH). This thesis contains an overview of the NPS HHC …

    nps Repository record for Flight operations for higher harmonic control research. (opens in a new tab)

  4. Strain-deflection relationships of freely vibrating wood beams

    … housing have recently become concerned about the vibrational behavior of residential floors. This concern resulted in a need for methods of sensing floor vibrations. Some investigators have sensed floor vibrations with electric resistance strain gauges bonded to the underside of the floor joists. …

    vt Repository record for Strain-deflection relationships of freely vibrating wood beams (opens in a new tab)

  5. Work Environment at Bosch Rexroth: Ergonomic Improvements in The Piston Production

    … by using relevant methods such as noise and vibration tests, mental health tests and ergonomic tests regarding poor posture. Upon examination of these tests, it becomes clear that a healthy work environment also enhances the operators’ work performance as well as it improves profitability and …

    chalmers Repository record for Work Environment at Bosch Rexroth: Ergonomic Improvements in The Piston Production (opens in a new tab)

  6. Dynamic response of small agricultural drive tires

    … load-deflection, non-rolling and rolling free vibration tests. Torsional properties were determined with torque-deflection and torsional free vibration tests. Higher vertical stiffness values were achieved from non-rolling free vibration than load-deflection and rolling free vibration. The …

    nebraska Repository record for Dynamic response of small agricultural drive tires (opens in a new tab)

  7. Analytical and experimental studies of beam waveguide absorbers for structural damping

    The reduction of structural vibrations in ships and submarines is a long standing concern of the Navy. Waveguide absorbers are very effective devices which can be applied to this problem. This study evaluates the increase in vibration damping of a plate structure across a broad frequency range …

    nps Repository record for Analytical and experimental studies of beam waveguide absorbers for structural damping (opens in a new tab)

  8. Experimental Investigations of Vortex Induced Vibration of A Flat Plate in Pitch Oscillation

    … fluid, may be subjected to vortex-induced vibrations (VIV). For a flat plate with only rotational degree of freedom, the VIV is rotational oscillation. Based on the experimental investigation, vortex-induced oscillation of the plate is studied. The Strouhal number is measured from the …

    tamu Repository record for Experimental Investigations of Vortex Induced Vibration of A Flat Plate in Pitch Oscillation (opens in a new tab)

  9. Manufacture and rehabilitation of guardrail posts using composite fabrics

    … to determine their natural frequencies. Free vibration tests of unwrapped, GFRP wrapped, and damaged posts were performed to establish amplitude decay for damping characteristics. (Abstract shortened by UMI.).

    wvu Repository record for Manufacture and rehabilitation of guardrail posts using composite fabrics (opens in a new tab)

  10. Response and Durability of Large Radius of Gyration Structures Subjected to Biaxial Vibration

    Multiaxial vibration tests were conducted using an electrodynamic shaker capable of controlled vibration in six degrees of freedom. The test specimen consisted of six large inductors insertion mounted on a printed wiring board. Average damage accumulation rate was measured for random excitation …

    maryland Repository record for Response and Durability of Large Radius of Gyration Structures Subjected to Biaxial Vibration (opens in a new tab)

  11. An investigation of the response of a 1/5-scale model of the Titan III launch vehicle to longitudinal excitation

    … resonant frequencies and mode shapes from vibration tests with a 1/5-scale model of the Titan III-A launch vehicle are presented, Measurements of longitudinally excited vibration modes of the model structure supported in a suspension system offering negligible restraint to longitudinal …

    vt Repository record for An investigation of the response of a 1/5-scale model of the Titan III launch vehicle to longitudinal excitation (opens in a new tab)

  12. Digital frequency demodulation for a laser vibrometer

    … to handle the special case of sine-dwell vibration tests is presented.

    vt Repository record for Digital frequency demodulation for a laser vibrometer (opens in a new tab)

  13. Vibration analysis of Topaz II

    … by the United States. This thesis provides a vibration analysis of the power unit of Topaz II. Several experimental vibration tests were conducted on the actual power unit by Sandia National Laboratories, in Albuquerque, New Mexico. Utilizing Structural Dynamics Research Corporation's I-DEAS …

    nps Repository record for Vibration analysis of Topaz II (opens in a new tab)

  14. Seismic analysis of a retrofitted reinforced concrete building in Mexico City

    … post-earthquake damage inspections and ambient vibration tests. A three-dimensional linear elastic model of the building has been developed to study the modal characteristics of the building and its seismic response during the 1985 and 2017 events. The results of the analyses have been used to …

    texas Repository record for Seismic analysis of a retrofitted reinforced concrete building in Mexico City (opens in a new tab)

  15. Design and testing of a novel modular nanosatellite structural bus

    … characteristics when subjected to stringent vibration tests. The unique cubic geometry of BUSA T's modular structure allows mission planners better control over cost and risk before launch, including the ability to predict features of the structure's frequency response over a variety of …

    bu Repository record for Design and testing of a novel modular nanosatellite structural bus (opens in a new tab)

  16. Random vibration analysis of the TOPAZ II nuclear reactor power system

    … 1994. This thesis focuses on the random vibration analysis of the TOPAZ-II Ya-2lU utilizing the most recent test results and the Master Series (updated version) I-DEAS software. The modal respose of the model and simulated random vibration tests were within 8.33%. This model is a feasible …

    nps Repository record for Random vibration analysis of the TOPAZ II nuclear reactor power system (opens in a new tab)

  17. Impact of Board Pad Finish of the SnPb and Lead-free Solder Interconnect Reliability for Leadless Chip Resistors Under Random Vibration Loading

    The results from a step-stress random vibration tests are used to assess the interconnect reliability of various solder, component terminal and printed wiring board pad finishes. The durability assessment of leadless chip resistors attached with tin-lead and tin-silver-copper is examined. Component …

    maryland Repository record for Impact of Board Pad Finish of the SnPb and Lead-free Solder Interconnect Reliability for Leadless Chip Resistors Under Random Vibration Loading (opens in a new tab)

  18. NONLINEAR RESPONSE OF ELECTRONIC ASSEMBLIES UNDER MULTIAXIAL VIBRATION EXCITATION

    … that environment involves exposure to multiaxial vibration which can dangerously affect the integrity of the electronic package’s functionality due to nonlinear amplification of the multiaxial response, in comparison to the corresponding uniaxial responses. This has particular implications in …

    maryland Repository record for NONLINEAR RESPONSE OF ELECTRONIC ASSEMBLIES UNDER MULTIAXIAL VIBRATION EXCITATION (opens in a new tab)

  19. Experimental and Computational Analysis of a 3D Printed Wing Structure

    … the wing is validated against static deformation tests as well as dynamic Ground Vibration Tests (GVT). The developed model is compared against the commercial software Nastran/Patran. Further plans include experimental aerodynamic test of 3D printed wing in the new Embry-Riddle Aeronautical …

    embry-riddle Repository record for Experimental and Computational Analysis of a 3D Printed Wing Structure (opens in a new tab)

Page 1 of 5